SK103-TP Equivalent & Substitute Parts

Part Overview

The SK103-TP is a Schottky rectifier diode manufactured by Micro Commercial Co, rated for 30V DC reverse voltage and 10A average rectified current in a DO-214AB (SMC) surface mount package. This component is classified as obsolete, necessitating identification of equivalent and substitute parts for ongoing design requirements and production continuity. The part operates across a junction temperature range of -55°C to 125°C and is RoHS3 compliant with unlimited moisture sensitivity level (MSL 1).

Key Parameters

Parameter	Value	Unit
Voltage - DC Reverse (Vr) (Max)	30	V
Current - Average Rectified (Io)	10	A
Voltage - Forward (Vf) (Max) @ If	650 mV @ 10 A	mV
Speed	Fast Recovery ≤ 500ns, > 200mA (Io)	ns
Current - Reverse Leakage @ Vr	1	mA @ 30 V
Capacitance @ Vr, F	500	pF @ 4V, 1MHz
Package / Case	DO-214AB, SMC	—
Operating Temperature - Junction	-55 to 125	°C
Technology	Schottky	—
Mounting Type	Surface Mount	—

Substitute Part Grouping Explanation

Substitution of the SK103-TP is determined by the following critical parameters:

Mandatory Compatibility Criteria:

Technology: Schottky (all substitutes must be Schottky diodes)
Package / Case: DO-214AB, SMC (surface mount package compatibility)
Voltage - DC Reverse (Vr) (Max): Must equal or exceed 30V
Current - Average Rectified (Io): Must equal or exceed 10A
Speed: Fast Recovery ≤ 500ns, > 200mA (Io)
Mounting Type: Surface Mount

Substitution Categories:

Direct Upgrade: Parts with identical or superior voltage and current ratings, active product status, and enhanced compliance certifications.

Current-Limited Substitutes: Parts with 30V voltage rating but reduced current capacity (3A to 8A). These are suitable only for applications where the actual circuit current requirement is lower than the SK103-TP's 10A rating.

Voltage-Enhanced Substitutes: Parts with voltage ratings exceeding 30V (45V) and matching or superior current capacity. These provide enhanced voltage margin and are suitable for direct replacement in all applications.

Parameter Comparison

Part Number	Manufacturer	Vr (Max) [V]	Io [A]	Vf (Max) @ If [mV]	Reverse Leakage @ Vr [µA]	Tj (Max) [°C]	Product Status	RoHS Status
SK103-TP	Micro Commercial Co	30	10	650 @ 10A	1000 @ 30V	125	Obsolete	ROHS3 Compliant
SK1045-LTP	Micro Commercial Co	45	10	550 @ 10A	200 @ 45V	150	Active	ROHS3 Compliant
B530C-13-F	Diodes Incorporated	30	5	550 @ 5A	500 @ 30V	150	Active	ROHS3 Compliant
HSM830J/TR13	Microchip Technology	30	8	620 @ 8A	250 @ 30V	175	Active	RoHS non-compliant
5821SMJ/TR13	Microchip Technology	30	3	480 @ 3A	1500 @ 30V	150	Active	RoHS non-compliant
B330-13-F	Diodes Incorporated	30	3	500 @ 3A	500 @ 30V	125	Active	ROHS3 Compliant
MBRS330T3G	onsemi	30	3	500 @ 3A	2000 @ 30V	150	Active	ROHS3 Compliant
SK33/TR13	Microsemi Corporation	30	3	500 @ 3A	500 @ 30V	125	Active	RoHS non-compliant
SS33	Fairchild Semiconductor	30	3	500 @ 3A	500 @ 30V	150	Active	Not specified
SS33-E3/57T	Vishay General Semiconductor - Diodes Division	30	3	500 @ 3A	500 @ 30V	125	Active	ROHS3 Compliant

Engineering Selection Recommendations

Primary Recommendation: SK1045-LTP

The SK1045-LTP from Micro Commercial Co is the optimal direct replacement for the SK103-TP. This part maintains the same 10A current rating and DO-214AB package, while providing enhanced voltage rating (45V vs. 30V), improved forward voltage characteristics (550 mV vs. 650 mV @ 10A), and extended junction temperature range (-55°C to 150°C vs. -55°C to 125°C). The SK1045-LTP is active in production, RoHS3 compliant, and available in high inventory (8185 units).

Secondary Recommendation: HSM830J/TR13

For applications where 8A current capacity is sufficient, the HSM830J/TR13 from Microchip Technology provides 30V rating with active product status and extended junction temperature capability (175°C). This part is suitable for designs with reduced current requirements. Note: RoHS non-compliant status requires compliance verification for end applications.

Tertiary Recommendation: B530C-13-F

The B530C-13-F from Diodes Incorporated offers 5A current capacity at 30V with active status, RoHS3 compliance, and extended temperature range (150°C). This part is appropriate for applications requiring 5A or less.

Current-Limited Substitutes (3A Rating):

Parts including B330-13-F, MBRS330T3G, SS33, SS33-E3/57T, and SK33/TR13 are suitable only for applications where circuit current does not exceed 3A. These parts are active, widely available, and provide design flexibility for lower-current applications. RoHS compliance status varies; B330-13-F, MBRS330T3G, and SS33-E3/57T are RoHS3 compliant.

Compliance Considerations:

For applications requiring RoHS3 compliance, select from: SK1045-LTP, B530C-13-F, B330-13-F, MBRS330T3G, or SS33-E3/57T. Parts HSM830J/TR13, 5821SMJ/TR13, and SK33/TR13 are RoHS non-compliant and require regulatory assessment before use.

Frequently Asked Questions (FAQ)

Q: Can the SK103-TP be directly replaced with a 3A-rated Schottky diode?

A: No. The SK103-TP is rated for 10A average rectified current. Substitution with 3A-rated parts (B330-13-F, MBRS330T3G, SS33, SS33-E3/57T, SK33/TR13) is only valid if the actual circuit current requirement is confirmed to be 3A or less. Using an undersized component in a 10A application will result in component failure.

Q: What is the primary advantage of the SK1045-LTP over the SK103-TP?

A: The SK1045-LTP provides three key improvements: (1) higher reverse voltage rating (45V vs. 30V), providing greater voltage margin; (2) lower forward voltage drop (550 mV vs. 650 mV @ 10A), reducing power dissipation; (3) extended junction temperature range (-55°C to 150°C vs. -55°C to 125°C), enabling operation in higher-temperature environments. The SK1045-LTP maintains the same 10A current rating and DO-214AB package.

Q: Are all substitute parts available in the same DO-214AB package?

A: Yes. All listed substitute parts use the DO-214AB (SMC) surface mount package, ensuring mechanical and electrical compatibility with existing PCB layouts and assembly processes.

Q: What is the significance of RoHS compliance status in part selection?

A: RoHS3 compliance is mandatory for products sold in the European Union and many other markets. For applications subject to RoHS regulations, select only from RoHS3-compliant parts: SK1045-LTP, B530C-13-F, B330-13-F, MBRS330T3G, or SS33-E3/57T. Non-compliant parts (HSM830J/TR13, 5821SMJ/TR13, SK33/TR13) require regulatory assessment and may not be suitable for regulated markets.

Q: Can the SK103-TP be replaced with a part rated for higher voltage but lower current?

A: No. The SK103-TP is rated for 10A current. Substitution with lower-current parts is not valid regardless of voltage rating. Current rating must equal or exceed the original specification for the application.

Q: What is the difference between "Fast Recovery" speed specification and other diode types?

A: Fast Recovery (≤ 500ns, > 200mA) indicates the diode's switching speed. All listed substitute parts meet this specification, ensuring compatibility with high-frequency switching applications. This parameter is critical for rectifier performance in power conversion circuits.

Q: How does forward voltage drop (Vf) affect component selection?

A: Forward voltage drop directly impacts power dissipation and thermal performance. Lower Vf values reduce heat generation. The SK1045-LTP (550 mV @ 10A) generates less heat than the SK103-TP (650 mV @ 10A). For thermal-sensitive applications, lower Vf ratings are preferable.

Q: Is the SK103-TP's obsolete status a concern for new designs?

A: Yes. The SK103-TP is obsolete and no longer in production. New designs should specify the SK1045-LTP or other active alternatives to ensure long-term supply availability and manufacturing support.

Q: What packaging options are available for substitute parts?

A: All substitute parts are available in surface mount packaging (DO-214AB, SMC). Packaging formats vary (Tape & Reel, Cut Tape, Bulk) depending on the manufacturer and supplier, but the physical package remains consistent for PCB compatibility.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message