LED Module SI-B8V113560WW Equivalent & Substitute Parts

Part Overview

The SI-B8V113560WW is a Samsung Semiconductor LED Module classified as LT-M562A_G2, designed for warm white linear light strip applications with a color temperature of 3000K. This component is currently listed as obsolete, which necessitates identification of functionally equivalent substitute parts for ongoing design requirements and procurement planning. The module features a flat lens configuration, integrated connector, and is packaged in tray format with 857 units currently in stock.

Substiute Parts

SI-B8V113560WW

Samsung Semiconductor, Inc.In Stock: 892SI-B8V113560WW Datasheet

Current PartRFQ

SI-B8V11156HUS

Samsung Semiconductor, Inc.In Stock: 1402SI-B8V11156HUS Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete SI-B8V113560WW is determined by strict alignment of the following critical parameters:

Primary Substitution Criteria:

• Color specification: White, Warm
• Color temperature: 3000K
• Configuration: Linear Light Strip
• Physical dimensions: 560.00mm length x 18.00mm width
• Lens type: Flat
• Connector integration: Present
• Base product number: SI-B8
• Compliance: RoHS Compliant

Secondary Compatibility Factors:

• Electrical characteristics within acceptable operating ranges
• Luminous flux output suitable for application requirements
• CRI rating of 80 or higher
• Forward voltage and current specifications compatible with existing driver circuits

The substitute part SI-B8V11156HUS meets all primary substitution criteria and maintains compatibility with the mechanical and electrical interface requirements of the original SI-B8V113560WW.

Parameter Comparison

Engineering Selection Recommendations

Substitution Feasibility:

The SI-B8V11156HUS is a direct substitute for the obsolete SI-B8V113560WW based on matching mechanical form factor, color specification, color temperature, and connector integration. Both parts share the same base product number (SI-B8) and maintain identical RoHS compliance status.

Key Differences:

The substitute part exhibits improved luminous efficiency (179 lm/W versus 142 lm/W) and higher luminous flux output (1930 lm versus 1580 lm) at comparable test conditions. The forward voltage is lower (22.5V versus 24.8V), and the physical height is increased (5.80mm versus 4.40mm). The substitute operates at a slightly higher test current (480mA versus 450mA).

Procurement Status:

The substitute part SI-B8V11156HUS is currently active and available with 1,349 units in stock, providing supply continuity for applications previously using the obsolete SI-B8V113560WW. The substitute is packaged in bulk format, whereas the original part was supplied in tray packaging.

Compliance Verification:

Both parts maintain RoHS compliance and share identical ECCN (EAR99) and HTSUS (8541.41.0000) classifications, ensuring regulatory and trade compliance equivalence.

Frequently Asked Questions (FAQ)

Q: Can SI-B8V11156HUS directly replace SI-B8V113560WW in existing designs?

A: The SI-B8V11156HUS maintains mechanical compatibility through identical length and width dimensions (560mm x 18mm) and connector integration. The increased height (5.80mm versus 4.40mm) must be verified against available mounting space. The lower forward voltage (22.5V versus 24.8V) and higher luminous output require driver circuit evaluation to ensure proper current regulation and thermal management.

Q: What are the electrical differences between these parts?

A: The substitute part operates at 22.5V forward voltage compared to 24.8V for the original part, a difference of 2.3V. Test current increases from 450mA to 480mA. These differences may require adjustment of current-limiting resistors or driver settings in the application circuit.

Q: Are there packaging considerations for procurement?

A: The original SI-B8V113560WW is supplied in tray packaging, while the substitute SI-B8V11156HUS is supplied in bulk packaging. Procurement and handling procedures may require adjustment to accommodate the different packaging format.

Q: Do both parts meet the same color and brightness specifications?

A: Both parts are specified as White, Warm with 3000K color temperature and 80 CRI. The substitute provides higher luminous flux (1930 lm versus 1580 lm) and improved efficiency (179 lm/W versus 142 lm/W), resulting in brighter output at comparable operating conditions.

Q: What is the physical height difference and does it matter?

A: The substitute part is 1.40mm taller (5.80mm versus 4.40mm). This difference must be evaluated against the mechanical envelope of the application to ensure clearance and proper fit within the lighting fixture or assembly.

Q: Are both parts RoHS compliant?

A: Yes, both SI-B8V113560WW and SI-B8V11156HUS are RoHS compliant and share identical ECCN and HTSUS classifications, ensuring equivalent regulatory status.