SI-60162-F Equivalent & Substitute Parts

Part Overview

The SI-60162-F is a 1 Port RJ45 Through Hole 10 Base-T modular connector manufactured by Stewart Connector under the MagJack® ST SI-60000 series. This shielded connector features a 90° right angle orientation with solder termination and board lock functionality, designed for PCB integration in 10 Base-T networking applications. The part is Active in product status with ROHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design flexibility permits component selection from qualified manufacturers.

Key Parameters

Parameter	Value
Connector Type	RJ45
Number of Ports	1
Mounting Type	Through Hole
Orientation	90° Angle (Right)
Termination	Solder
Applications	10 Base-T
Shielding	Shielded, EMI Finger
Tab Direction	Down
Contact Finish	Gold
RoHS Status	ROHS3 Compliant
MSL Rating	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the SI-60162-F are qualified based on the following critical parameters:

Primary Substitution Criteria:

Connector Type: RJ45 jack configuration
Number of Ports: Single port
Mounting Type: Through hole PCB mounting
Orientation: 90° right angle
Termination: Solder
Shielding: Shielded construction with EMI protection
Tab Direction: Down orientation
Contact Finish: Gold plating
Compliance: ROHS3 or RoHS compliant status
MSL Rating: 1 (Unlimited)

The identified substitutes meet these core electrical and mechanical parameters, enabling direct replacement in 10 Base-T networking applications without PCB redesign.

Parameter Comparison

Parameter	SI-60162-F (Main)	68899-001LF	ARJ11A-MDSN-MU2
Manufacturer	Stewart Connector	Amphenol ICC (FCI)	Abracon LLC
Connector Type	RJ45	Jack (8p8c RJ45)	RJ45
Number of Ports	1	1	1
Mounting Type	Through Hole	Through Hole	Through Hole
Orientation	90° Angle (Right)	90° Angle (Right)	90° Angle (Right)
Termination	Solder	Solder	Solder
Shielding	Shielded, EMI Finger	Unshielded	Shielded, EMI Finger
Tab Direction	Down	Down	Down
Contact Finish	Gold	Gold, GXT™	Gold
Contact Finish Thickness	50.0µin (1.27µm)	30.0µin (0.76µm)	6.00µin (0.152µm)
LED Color	Does Not Contain LED	Does Not Contain LED	Does Not Contain LED
RoHS Status	ROHS3 Compliant	RoHS Compliant	ROHS3 Compliant
MSL Rating	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Product Status	Active	Active	Active

Engineering Selection Recommendations

SI-60162-F (Primary Part): Maintains full specification alignment with shielded construction, EMI finger protection, and ROHS3 compliance. Recommended for applications requiring maximum EMI shielding and contact finish durability.

68899-001LF (Amphenol ICC): Provides through-hole RJ45 jack configuration with 90° right angle orientation and solder termination. This substitute features unshielded construction, which represents a functional deviation from the main part's shielded specification. Suitable for applications where EMI shielding is not a design requirement. RoHS compliant with active product status and unlimited MSL rating.

ARJ11A-MDSN-MU2 (Abracon LLC): Maintains shielded construction with EMI finger protection matching the main part's electrical characteristics. Offers ROHS3 compliance and unlimited MSL rating. Contact finish thickness is reduced compared to the main part, which may affect long-term durability in high-cycle insertion applications. Suitable for cost-optimized designs where contact finish thickness reduction is acceptable.

Frequently Asked Questions (FAQ)

Q: Can 68899-001LF replace SI-60162-F in all applications?

A: The 68899-001LF provides mechanical and electrical compatibility for through-hole PCB mounting with 90° right angle orientation and solder termination. However, this substitute features unshielded construction, whereas the SI-60162-F includes shielded design with EMI finger protection. Selection depends on whether EMI shielding is required for the specific application.

Q: What is the primary difference between ARJ11A-MDSN-MU2 and SI-60162-F?

A: Both parts maintain shielded construction with EMI finger protection and ROHS3 compliance. The primary difference is contact finish thickness: SI-60162-F specifies 50.0µin (1.27µm) while ARJ11A-MDSN-MU2 specifies 6.00µin (0.152µm). This affects contact durability in high-insertion-cycle environments.

Q: Are all substitute parts available in the same packaging?

A: Packaging specifications vary. SI-60162-F packaging is not specified in available data. 68899-001LF is supplied in Tube packaging. ARJ11A-MDSN-MU2 packaging is not specified. Verify packaging requirements with procurement specifications before component selection.

Q: Do all parts meet the same compliance standards?

A: SI-60162-F and ARJ11A-MDSN-MU2 are both ROHS3 compliant. 68899-001LF is RoHS compliant. All three parts carry MSL rating 1 (Unlimited) and EAR99 ECCN classification. Verify REACH status requirements: SI-60162-F and ARJ11A-MDSN-MU2 are REACH Unaffected; 68899-001LF is REACH Affected.

Q: What is the operating temperature range for each part?

A: SI-60162-F operating temperature is not specified in available data. 68899-001LF operates from -40°C to 70°C. ARJ11A-MDSN-MU2 operates from 0°C to 70°C. Confirm operating temperature requirements against application specifications before final selection.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message