SI-60095-F Equivalent & Substitute Parts

Part Overview

The SI-60095-F is a 4-port RJ45 modular connector manufactured by Stewart Connector, designed for through-hole PCB mounting in 10/100/1000 Base-T Ethernet applications with AutoMDIX capability. This connector features a 90° right-angle orientation, shielded design with EMI finger protection, and gold-plated copper alloy contacts. The product is currently active and RoHS3 compliant. Substitute parts may be required due to inventory constraints, supply chain considerations, or specific application requirements while maintaining functional compatibility.

Substiute Parts

SI-60095-F

Stewart ConnectorIn Stock: 906SI-60095-F Datasheet

Current PartRFQ

J8064E64NL

Pulse ElectronicsIn Stock: 326781J8064E64NL Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The J8064E64NL from Pulse Electronics qualifies as a substitute for the SI-60095-F based on the following critical parameters:

• Connector Type: Both are RJ45 modular connectors
• Port Configuration: Both feature 4 ports in a single row
• Mounting Method: Both use through-hole solder termination
• Physical Orientation: Both are 90° right-angle connectors
• Shielding Design: Both incorporate shielded construction with EMI finger protection
• Contact Finish: Both use gold plating for reliable electrical contact
• Housing Material: Both utilize thermoplastic housing
• Compliance: Both are RoHS compliant and REACH unaffected
• Moisture Sensitivity: Both are MSL 1 (unlimited)

The primary functional difference is the supported data rate: SI-60095-F supports 10/100/1000 Base-T, while J8064E64NL supports 10/100 Base-TX. Both include AutoMDIX capability for automatic cable orientation detection.

Parameter Comparison

Engineering Selection Recommendations

Both the SI-60095-F and J8064E64NL are active products with current manufacturing status and full regulatory compliance. Selection between these parts should be based on application requirements:

The SI-60095-F is suitable for applications requiring gigabit Ethernet support (10/100/1000 Base-T). The J8064E64NL is suitable for applications limited to fast Ethernet speeds (10/100 Base-TX). Both connectors meet RoHS and REACH compliance requirements and are suitable for industrial and commercial PCB applications with unlimited moisture sensitivity tolerance.

Physical compatibility is confirmed through matching mounting type, orientation, termination method, and board height within acceptable tolerance (13.97mm vs. 13.61mm). Both connectors include board guide features and identical tab orientation for consistent PCB layout integration.

Frequently Asked Questions (FAQ)

Q: Can J8064E64NL be used as a direct replacement for SI-60095-F?

A: J8064E64NL is mechanically and electrically compatible for through-hole PCB mounting. The primary consideration is data rate capability: J8064E64NL supports 10/100 Base-TX, while SI-60095-F supports 10/100/1000 Base-T. Use J8064E64NL only in applications where gigabit speed is not required.

Q: Are there physical compatibility concerns between these connectors?

A: Both connectors have similar board heights (13.97mm vs. 13.61mm difference of 0.36mm), identical 90° right-angle orientation, matching tab direction, and equivalent board guide features. PCB layout compatibility is confirmed for standard through-hole designs.

Q: What are the contact material differences?

A: SI-60095-F uses copper alloy contacts with 50.0µin gold plating; J8064E64NL uses phosphor bronze contacts with 30.0µin gold plating. Both provide reliable electrical contact with gold finish protection. The thicker plating on SI-60095-F may offer extended contact life in high-cycle applications.

Q: Do both connectors support AutoMDIX functionality?

A: Yes, both SI-60095-F and J8064E64NL include AutoMDIX capability for automatic cable orientation detection in their respective speed classes.

Q: What is the packaging difference?

A: SI-60095-F packaging is not specified in available data. J8064E64NL is supplied in tray packaging. Verify packaging requirements for your procurement and assembly processes.

Q: Are both connectors RoHS compliant?

A: Yes, both connectors are RoHS compliant. SI-60095-F meets RoHS3 requirements; J8064E64NL meets RoHS requirements. Both are REACH unaffected and classified as EAR99 for export purposes.