SI-60092-F Equivalent & Substitute Parts

Part Overview

The SI-60092-F is a 2-port RJ45 modular connector manufactured by Stewart Connector, designed for 10/100/1000 Base-T applications with AutoMDIX functionality. This through-hole mounted connector features a 90° right-angle orientation and is part of the MagJack® ST SI-60000 series. The product is currently active and widely available with 907 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters align with application requirements, enabling component sourcing flexibility and supply chain continuity.

Substiute Parts

SI-60092-F

Stewart ConnectorIn Stock: 970SI-60092-F Datasheet

Current PartRFQ

J8064E62NL

Pulse ElectronicsIn Stock: 1376J8064E62NL Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SI-60092-F is determined by strict alignment of the following core parameters:

• Connector Type & Port Configuration: RJ45, 2-port configuration
• Mounting & Orientation: Through-hole, 90° right-angle orientation
• Electrical Specifications: Shielded design, 4 cores per jack, solder termination
• Contact Properties: Gold finish, copper-based alloy materials
• Compliance & Environmental: RoHS compliance, MSL 1 rating, REACH unaffected status

The identified substitute J8064E62NL meets these core mechanical and electrical compatibility criteria. However, application-specific bandwidth requirements (10/100/1000 Base-T vs. 10/100 Base-TX) must be evaluated against system specifications.

Parameter Comparison

Engineering Selection Recommendations

Both the SI-60092-F and J8064E62NL are active products with full RoHS compliance and unlimited moisture sensitivity ratings, ensuring long-term availability and environmental regulation adherence. The SI-60092-F supports 10/100/1000 Base-T bandwidth, while the J8064E62NL is rated for 10/100 Base-TX. Selection between these parts must be based on the actual bandwidth requirement of the target application. The J8064E62NL includes EMI finger shielding, providing enhanced electromagnetic interference protection. Both connectors feature gold-plated contacts and identical MSL ratings, supporting equivalent reliability in standard manufacturing environments.

Frequently Asked Questions (FAQ)

Q: Can J8064E62NL replace SI-60092-F in a gigabit Ethernet application?

A: No. The SI-60092-F supports 10/100/1000 Base-T (gigabit), while J8064E62NL is rated for 10/100 Base-TX only. Substitution is valid only for applications requiring 10/100 Base-TX bandwidth or lower.

Q: Are the physical dimensions compatible?

A: Both connectors feature 90° right-angle through-hole mounting with similar board heights (13.97mm vs. 13.61mm). The 0.36mm height difference is within typical PCB layout tolerances for most applications.

Q: What is the difference in shielding between these parts?

A: The SI-60092-F provides standard shielding. The J8064E62NL includes EMI finger shielding, offering additional electromagnetic interference protection suitable for noise-sensitive environments.

Q: Are both parts RoHS compliant?

A: Yes. SI-60092-F is ROHS3 compliant, and J8064E62NL is RoHS compliant. Both meet current environmental regulations.

Q: What is the contact material difference?

A: SI-60092-F uses copper alloy contacts, while J8064E62NL uses phosphor bronze. Both are gold-plated and suitable for standard Ethernet applications.