SH102M010ST Equivalent & Substitute Parts

Part Overview

The SH102M010ST is a 1000 µF, 10 V aluminum electrolytic capacitor in radial, can package manufactured by Cornell Dubilier Electronics (CDE). This component is classified as obsolete, making direct replacement necessary for ongoing production and maintenance applications. The part operates across a temperature range of -40°C to 105°C with a rated lifetime of 2000 hours at 105°C, suitable for general-purpose applications requiring energy storage and filtering in low-voltage circuits.

Key Parameters

Parameter	Value	Unit
Capacitance	1000	µF
Voltage Rating	10	V
Tolerance	±20%	—
Package Type	Radial, Can	—
Mounting Type	Through Hole	—
Lead Spacing	0.197" (5.00 mm)	—
Diameter	0.394" (10.00 mm)	—
Operating Temperature Range	-40°C to 105°C	—
Lifetime at 105°C	2000	Hours
RoHS Status	ROHS3 Compliant	—

Substitute Part Grouping Explanation

Substitution of the SH102M010ST is determined by strict equivalence across the following parameters: capacitance (1000 µF), voltage rating (10 V), tolerance (±20%), package type (radial, can), mounting type (through hole), lead spacing (0.197" / 5.00 mm), and physical diameter (0.394" / 10.00 mm). All substitute parts listed maintain these core electrical and mechanical specifications, ensuring direct compatibility with existing PCB layouts and circuit designs.

Substitute parts are grouped by product status and performance characteristics. Active parts with extended lifetime ratings and lower impedance values provide enhanced performance over the obsolete SH102M010ST. Parts designated "Not For New Designs" remain functionally equivalent but are restricted from new product development. Height variations and impedance differences are noted where they occur, as these parameters may influence ripple current handling and thermal performance in specific applications.

Parameter Comparison

Part Number	Manufacturer	Capacitance (µF)	Voltage (V)	Tolerance	ESR / Impedance	Lifetime @ 105°C (Hrs)	Height (mm)	Product Status
SH102M010ST	Cornell Dubilier Electronics	1000	10	±20%	290 mOhm @ 120 Hz	2000	16.00	Obsolete
SEK102M010ST	Cornell Dubilier Electronics	1000	10	±20%	290 mOhm	2000	16.00	Active
108CKE010M	Cornell Dubilier / Illinois Capacitor	1000	10	±20%	315 mOhm @ 120 Hz	2000	14.00	Active
10YXJ1000M10X12.5	Rubycon	1000	10	±20%	80 mOhms	8000	14.00	Active
EEU-FC1A102	Panasonic Electronic Components	1000	10	±20%	68 mOhms	3000	16.00	Active
EKY-100ELL102MJ16S	Chemi-Con	1000	10	±20%	60 mOhms	6000	17.50	Active
EKZE100ELL102MJ16S	Chemi-Con	1000	10	±20%	38 mOhms	4000	17.50	Active
UHE1A102MPD6	Nichicon	1000	10	±20%	60 mOhms	6000	16.00	Not For New Designs
UPW1A102MPD	Nichicon	1000	10	±20%	68 mOhms	5000	16.00	Not For New Designs

Engineering Selection Recommendations

For Active Production and New Designs:

SEK102M010ST (Cornell Dubilier Electronics) provides the most direct replacement with identical electrical specifications and active product status. This part maintains the same ESR (290 mOhm), lifetime rating (2000 hours at 105°C), and physical dimensions as the obsolete SH102M010ST while offering an extended operating temperature range (-55°C to 105°C).

10YXJ1000M10X12.5 (Rubycon) offers superior performance characteristics with significantly extended lifetime (8000 hours at 105°C) and reduced impedance (80 mOhms), making it suitable for applications requiring enhanced reliability and lower ripple current dissipation. Height reduction to 14.00 mm may provide PCB layout advantages.

EEU-FC1A102 (Panasonic Electronic Components) is qualified to AEC-Q200 automotive standards and carries active product status. This part is appropriate for automotive and mission-critical applications requiring formal qualification documentation.

EKZE100ELL102MJ16S (Chemi-Con) delivers the lowest impedance (38 mOhms) among available substitutes with 4000-hour lifetime rating, optimizing ripple current handling for high-frequency switching applications. Height increase to 17.50 mm requires PCB layout verification.

For Maintenance and Legacy Systems:

UHE1A102MPD6 (Nichicon) and UPW1A102MPD (Nichicon) remain functionally equivalent substitutes with active inventory availability. These parts are designated "Not For New Designs" and are restricted to replacement applications in existing systems. Both maintain compatibility with original SH102M010ST specifications.

Compliance Considerations:

All listed substitute parts maintain ROHS3 compliance. EEU-FC1A102 carries REACH Unaffected status. UHE1A102MPD6 is REACH Affected and requires compliance verification for specific end-use applications.

Frequently Asked Questions (FAQ)

Q: Can SEK102M010ST directly replace SH102M010ST without PCB modification?

A: Yes. SEK102M010ST maintains identical lead spacing (0.197" / 5.00 mm), diameter (0.394" / 10.00 mm), and height (16.00 mm). No PCB layout changes are required for direct substitution.

Q: What is the primary advantage of 10YXJ1000M10X12.5 over the original SH102M010ST?

A: The Rubycon part provides 8000-hour lifetime at 105°C compared to 2000 hours for the SH102M010ST, representing a 4× improvement in rated service life. Impedance is reduced to 80 mOhms, lowering ripple current dissipation and heat generation.

Q: Are there height restrictions when selecting a substitute?

A: Height variations exist among substitutes. The original SH102M010ST is 16.00 mm tall. Rubycon 10YXJ1000M10X12.5 and Cornell Dubilier 108CKE010M are 14.00 mm (shorter). Chemi-Con EKY-100ELL102MJ16S and EKZE100ELL102MJ16S are 17.50 mm (taller). PCB clearance must be verified before selection.

Q: Which substitute is recommended for automotive applications?

A: EEU-FC1A102 (Panasonic) carries AEC-Q200 qualification and is designated for automotive use. This part is active and suitable for new automotive designs requiring formal qualification documentation.

Q: Can parts marked "Not For New Designs" be used in new product development?

A: UHE1A102MPD6 and UPW1A102MPD are restricted from new designs per manufacturer designation. These parts are appropriate only for replacement and maintenance of existing systems. Active alternatives must be selected for new product development.

Q: What is the significance of impedance differences among substitutes?

A: Lower impedance reduces ripple current dissipation and heat generation. EKZE100ELL102MJ16S (38 mOhms) dissipates less heat than SH102M010ST (290 mOhm). This is advantageous in high-frequency switching applications but requires thermal design verification in specific circuit topologies.

Q: Are all substitutes ROHS3 compliant?

A: Yes. All listed substitute parts maintain ROHS3 compliance. EEU-FC1A102 and 10YXJ1000M10X12.5 are REACH Unaffected. UHE1A102MPD6 is REACH Affected and requires compliance verification for specific applications.

Q: What operating temperature range does each substitute support?

A: SH102M010ST operates -40°C to 105°C. SEK102M010ST extends this to -55°C to 105°C. All other substitutes operate within -40°C to 105°C or -55°C to 105°C ranges. Verify application temperature requirements before selection.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message