SFT01M-15 Equivalent & Substitute Parts Reference

Part Overview

The SFT01M-15 from MEAN WELL USA Inc. is a DC DC converter categorized as an Isolated Module. It delivers a single 15V output at 67mA with an input voltage range of 10.8V to 13.2V. The part features a 3 kV isolation, SCP and OCP safety features, operates in temperatures from -40°C to 85°C (with derating), and provides efficiency of 74%. SFT01M-15 has been marked as obsolete, creating a requirement for direct equivalents or substitute parts maintaining compatibility in critical applications where identical functional and mechanical characteristics must be met.

Substiute Parts

SFT01M-15

MEAN WELL USA Inc.In Stock: 1106SFT01M-15 Datasheet

Current PartRFQ

SFTN01M-15

MEAN WELL USA Inc.In Stock: 1180SFTN01M-15 Datasheet

SimilarRFQ

SB01S1215A

Delta ElectronicsIn Stock: 1023SB01S1215A Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Suitable substitutes for DC DC converters are determined by ensuring convergence in voltage rating (input and output), output current, isolation voltage, power output, number of outputs, safety features (OCP, SCP), thermal operating range, efficiency, mounting type, and package/case dimensions. All listed parts must match or exceed these parameters to guarantee true electrical and mechanical interchangeability within the module’s category. Only parameters explicitly supplied are referenced as criteria for equivalency.

Parameter Comparison

Engineering Selection Recommendations

SFT01M-15 is obsolete. Substitute models SB01S1215A (Delta Electronics) and SFTN01M-15 (MEAN WELL USA Inc.) are listed as equivalents. SB01S1215A is active and meets RoHS3 and REACH compliance as specified. The Moisture Sensitivity Level differs, with the main part at MSL 1 (Unlimited) and the Delta replacement at MSL 3 (168 Hours).

Frequently Asked Questions (FAQ)

Q: What are the critical substitution criteria for SFT01M-15?
A: Output voltage, output current, input voltage range, power, isolation voltage, number of outputs, safety features, operating temperature, mounting type, and package/case.

Q: Are the physical package and dimensions compatible among substitutes?
A: SB01S1215A shares the same package type (12-SMD Module, 10 Leads) but size and thickness may vary; verify mechanical fit per listed values.

Q: Do all substitutes maintain necessary compliance?
A: Both SFT01M-15 and SB01S1215A are ROHS3 compliant and REACH unaffected. Check MSL requirements for assembly compatibility.

Q: Will the substitute provide equivalent isolation and performance?
A: SB01S1215A specifies 3 kV isolation, matching the SFT01M-15.

Q: What if SFTN01M-15 has missing parameter data?
A: Only listed parameters may be used. If not provided, compatibility cannot be determined based solely on the supplied information.

Q: Are all substitutes active and available?
A: SB01S1215A is listed as active; SFTN01M-15 status not specified. SFT01M-15 itself is obsolete.