SFML-135-T1-S-D Equivalent & Substitute Parts

Part Overview

The SFML-135-T1-S-D is a 70-position receptacle connector from Samtec Inc.'s Tiger Eye™ SFML series, designed for board-to-board or cable applications. This through-hole mounted connector features 0.050" (1.27mm) pitch mating contacts with gold plating and is rated for 3.2A per contact at 250VAC. The part maintains active product status with full inventory availability. Substitute parts are identified to support procurement flexibility, design revisions, and supply chain continuity.

Substiute Parts

SFML-135-T1-S-D

Samtec Inc.In Stock: 1056SFML-135-T1-S-D Datasheet

Current PartRFQ

SFML-135-01-S-D

Samtec Inc.In Stock: 913SFML-135-01-S-D Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SFML-135-T1-S-D is determined by strict equivalence across the following critical parameters:

• Connector Type & Contact Configuration: Receptacle with female socket contacts
• Position Count & Arrangement: 70 positions in 2-row configuration
• Pitch Specification: 0.050" (1.27mm) mating pitch and row spacing
• Electrical Ratings: 3.2A per contact, 250VAC minimum
• Mounting & Termination: Through-hole solder termination with locking ramp fastening
• Contact Finish: Gold-plated mating surface with tin-plated posts
• Environmental Compliance: UL94 V-0 flammability, ROHS3 compliance, MSL 1

The SFML-135-01-S-D qualifies as a direct substitute based on identical specifications across all critical parameters within the Tiger Eye™ SFML series.

Parameter Comparison

Engineering Selection Recommendations

Both the SFML-135-T1-S-D and SFML-135-01-S-D maintain active product status with full regulatory compliance. Selection between these parts is based on inventory availability and procurement lead times rather than technical differentiation. The SFML-135-T1-S-D carries 970 pieces in stock, while the SFML-135-01-S-D maintains 841 pieces. Both parts satisfy ROHS3 compliance, UL94 V-0 flammability requirements, and REACH unaffected status, making either suitable for applications requiring environmental and safety certifications.

Frequently Asked Questions (FAQ)

Q: Are SFML-135-T1-S-D and SFML-135-01-S-D electrically and mechanically interchangeable?

A: Yes. Both parts share identical electrical ratings (3.2A per contact, 250VAC), mechanical dimensions (70 positions, 0.050" pitch, 2-row configuration), contact finishes, and mounting specifications. They are direct substitutes within the Tiger Eye™ SFML series.

Q: What determines substitution eligibility for this connector family?

A: Substitution is valid when parts maintain identical position count, pitch spacing, row configuration, contact finish specifications, electrical ratings, mounting type, and termination method. Deviations in any of these parameters disqualify substitution.

Q: Are there packaging differences between these parts?

A: Both parts are supplied in tube packaging. No packaging differentiation exists between the SFML-135-T1-S-D and SFML-135-01-S-D.

Q: Do these connectors require special handling or storage?

A: Both parts carry MSL 1 (Unlimited) moisture sensitivity level, indicating no special moisture control requirements during storage or handling.

Q: What is the operational temperature range for these connectors?

A: Both parts operate across -55°C to 125°C, suitable for industrial and extended temperature applications.