SFML-130-01-S-D Equivalent & Substitute Parts

Part Overview

The SFML-130-01-S-D is a 60-position receptacle connector from Samtec Inc.'s Tiger Eye™ SFML series, designed for board-to-board or cable applications. This through-hole mounted connector features 0.050" (1.27mm) pitch mating contacts with gold plating and is rated for 3.2A per contact at 250VAC. The connector maintains Active product status with full RoHS3 compliance and REACH unaffected designation. Identifying equivalent substitute parts ensures design flexibility, supply chain continuity, and component availability across manufacturing cycles.

Substiute Parts

SFML-130-01-S-D

Samtec Inc.In Stock: 837SFML-130-01-S-D Datasheet

Current PartRFQ

SFML-130-T1-S-D

Samtec Inc.In Stock: 837SFML-130-T1-S-D Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SFML-130-01-S-D are determined by strict equivalence across the following critical parameters:

• Connector Type & Contact Configuration: Receptacle with female socket contacts
• Position Count & Arrangement: 60 positions in 2-row configuration
• Pitch Specification: 0.050" (1.27mm) mating pitch and row spacing
• Electrical Ratings: 3.2A per contact at 250VAC minimum
• Mounting & Termination: Through-hole solder termination with locking ramp fastening
• Contact Finish: Gold-plated mating surface with tin-plated posts
• Environmental Compliance: UL94 V-0 flammability, RoHS3 compliance, REACH unaffected status
• Operating Range: -55°C to 125°C temperature specification

Parts meeting all these criteria are classified as direct substitutes within the Tiger Eye™ SFML series.

Parameter Comparison

Engineering Selection Recommendations

Both the SFML-130-01-S-D and SFML-130-T1-S-D maintain Active product status with identical electrical, mechanical, and environmental specifications. Both parts are RoHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic component manufacturing and distribution. The SFML-130-T1-S-D is designated as the manufacturer-recommended substitute and demonstrates equivalent performance across all specified parameters. Selection between these parts may be based on inventory availability, with the SFML-130-T1-S-D currently showing 782 units in stock compared to 772 units for the SFML-130-01-S-D.

Frequently Asked Questions (FAQ)

Q: Are SFML-130-01-S-D and SFML-130-T1-S-D electrically interchangeable?

A: Yes. Both parts are rated for 3.2A per contact at 250VAC with identical contact finish specifications (gold mating surface, tin posts) and operating temperature range (-55°C to 125°C).

Q: Do these connectors have the same physical footprint?

A: Yes. Both connectors feature 60 positions in a 2-row configuration with 0.050" (1.27mm) pitch and row spacing. Through-hole mounting dimensions and insulation height (0.180") are identical.

Q: What is the difference between the part numbers?

A: The part numbers differ in their variant designations (01 versus T1), but this distinction does not affect electrical performance, mechanical compatibility, or environmental ratings. Both are Tiger Eye™ SFML series receptacles from Samtec Inc.

Q: Are both parts suitable for high-reliability applications?

A: Both parts meet UL94 V-0 flammability requirements and maintain MSL 1 (Unlimited) moisture sensitivity rating, supporting applications requiring robust environmental performance.

Q: Can I use these connectors in applications requiring RoHS compliance?

A: Yes. Both SFML-130-01-S-D and SFML-130-T1-S-D are ROHS3 compliant and REACH unaffected, meeting regulatory requirements for restricted substance use in electronic assemblies.