SFML-115-01-S-D Equivalent & Substitute Parts

Part Overview

The SFML-115-01-S-D is a 30-position receptacle connector from Samtec Inc.'s Tiger Eye™ SFML series, designed for board-to-board or cable applications. This through-hole mounted connector features 0.050" (1.27mm) pitch mating contacts with gold plating and is rated for 3.2A per contact at 250VAC. The connector maintains active product status with full inventory availability. Substitute parts are identified to provide alternative sourcing options while maintaining electrical and mechanical compatibility within the Tiger Eye™ SFML series specifications.

Substiute Parts

SFML-115-01-S-D

Samtec Inc.In Stock: 780SFML-115-01-S-D Datasheet

Current PartRFQ

SFML-115-T1-S-D

Samtec Inc.In Stock: 1312SFML-115-T1-S-D Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SFML-115-01-S-D is determined by strict adherence to the following critical parameters:

• Connector type: Receptacle with female socket contacts
• Position count: 30 positions
• Pitch specification: 0.050" (1.27mm) mating pitch with 0.050" (1.27mm) row spacing
• Mounting configuration: Through-hole solder termination
• Contact finish: Gold plating on mating surfaces
• Electrical ratings: 3.2A per contact minimum, 250VAC minimum
• Operating temperature range: -55°C ~ 125°C
• Series compatibility: Tiger Eye™ SFML series
• Compliance: ROHS3 compliant, UL94 V-0 flammability rating

The substitute part SFML-115-T1-S-D meets all these criteria and is classified as a manufacturer-recommended equivalent within the same product series.

Parameter Comparison

Engineering Selection Recommendations

Both the SFML-115-01-S-D and SFML-115-T1-S-D maintain active product status with full compliance to ROHS3 and REACH regulations. Both connectors carry UL94 V-0 flammability certification and MSL 1 moisture sensitivity rating, indicating no special handling requirements during storage or assembly.

The SFML-115-T1-S-D is designated as the manufacturer-recommended substitute and provides equivalent electrical performance, mechanical compatibility, and environmental specifications. Selection between these parts may be based on inventory availability, lead time, or procurement requirements, as all functional and compliance parameters are identical.

Frequently Asked Questions (FAQ)

Q: Can SFML-115-T1-S-D be used as a direct replacement for SFML-115-01-S-D?

A: Yes. Both connectors are 30-position receptacles within the Tiger Eye™ SFML series with identical pitch, row spacing, contact ratings, and operating specifications. They are mechanically and electrically interchangeable.

Q: Are there any differences in mating compatibility?

A: No. Both parts feature identical 0.050" (1.27mm) pitch mating specifications, 2-row configuration with 0.050" (1.27mm) row spacing, and gold-plated contacts. They mate with the same complementary connector designs.

Q: Do both parts require the same PCB footprint?

A: Yes. Both connectors share the same base product number (SFML-115), mounting type (through-hole), and physical dimensions including insulation height (0.180") and contact post length (0.120"). PCB layout and footprint design are identical.

Q: What is the difference between the part number designations?

A: The part numbers differ in their configuration codes (01 versus T1), but this variation does not affect electrical performance, mechanical fit, or compliance specifications. Both are active products from Samtec Inc.

Q: Are there any compliance or certification differences?

A: No. Both parts carry identical certifications: ROHS3 compliance, REACH unaffected status, UL94 V-0 flammability rating, and EAR99 export classification. Moisture sensitivity level is MSL 1 for both.

Q: What current and voltage ratings apply to both parts?

A: Both connectors are rated for 3.2A per contact and 250VAC maximum. Operating temperature range is -55°C ~ 125°C for both parts.