SFMC-115-T1-S-D Equivalent & Substitute Parts

Part Overview

The SFMC-115-T1-S-D is a 30-position receptacle connector from Samtec Inc.'s Tiger Eye™ SFMC series, designed for board-to-board or cable applications. This connector features 0.050" (1.27mm) pitch mating with gold-plated contacts and through-hole solder termination. The part is currently active in production with 651 units in stock. Substitute parts are identified to provide design flexibility, inventory alternatives, and continuity of supply for applications requiring equivalent electrical and mechanical performance.

Substiute Parts

SFMC-115-T1-S-D

Samtec Inc.In Stock: 682SFMC-115-T1-S-D Datasheet

Current PartRFQ

SFMC-115-01-S-D

Samtec Inc.In Stock: 939SFMC-115-01-S-D Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SFMC-115-T1-S-D is determined by strict equivalence across the following critical parameters:

• Connector type (Receptacle)
• Number of positions (30)
• Pitch - mating (0.050" / 1.27mm)
• Number of rows (2)
• Row spacing - mating (0.050" / 1.27mm)
• Mounting type (Through Hole)
• Termination method (Solder)
• Contact finish - mating (Gold)
• Contact finish thickness - mating (30.0µin / 0.76µm)
• Operating temperature range (-55°C ~ 125°C)
• Material flammability rating (UL94 V-0)
• Insulation material (Liquid Crystal Polymer)
• Current rating (2.9A per Contact)
• RoHS compliance status (ROHS3 Compliant)
• Moisture sensitivity level (1 / Unlimited)

The SFMC-115-01-S-D meets all these criteria and qualifies as a direct substitute. Both parts belong to the same Tiger Eye™ SFMC series and share identical electrical and mechanical specifications with the exception of contact material composition.

Parameter Comparison

Engineering Selection Recommendations

Both SFMC-115-T1-S-D and SFMC-115-01-S-D are active production parts with ROHS3 compliance and REACH unaffected status. The parts are electrically and mechanically equivalent across all critical mating and termination parameters. The contact material difference (Phosphor Bronze versus Beryllium Copper) does not affect the specified electrical performance, current rating, or operating temperature range. Both parts maintain UL94 V-0 flammability certification and identical moisture sensitivity classification. Selection between these parts may be based on inventory availability, supply chain considerations, or specific application requirements related to contact material properties.

Frequently Asked Questions (FAQ)

Q: Can SFMC-115-01-S-D be used as a direct replacement for SFMC-115-T1-S-D?

A: Yes. Both parts are functionally equivalent receptacle connectors with identical position count (30), pitch (0.050"), row configuration (2 rows), mounting type (through hole), and electrical ratings (2.9A per contact). All critical mating and termination parameters match.

Q: What is the difference between these two part numbers?

A: The primary difference is the contact material. SFMC-115-T1-S-D uses Phosphor Bronze contacts, while SFMC-115-01-S-D uses Beryllium Copper contacts. Both materials meet the specified current rating and operating temperature range.

Q: Are there any compliance or certification differences?

A: No. Both parts carry identical certifications: UL94 V-0 flammability rating, ROHS3 compliance, REACH unaffected status, and EAR99 export classification.

Q: What is the moisture sensitivity level for these connectors?

A: Both parts have Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.

Q: Can these connectors be used interchangeably in board-to-board and cable applications?

A: Yes. Both parts support board-to-board or cable style configurations with identical through-hole solder termination and push-pull fastening.