SFM-107-T1-L-D Equivalent & Substitute Parts

Part Overview

The SFM-107-T1-L-D is a 14-position receptacle connector from Samtec Inc.'s Tiger Eye™ SFM series, designed for board-to-board or cable applications. This connector features 0.050" (1.27mm) pitch mating with gold-plated contacts rated for 3.2A per contact at 250VAC. The part is currently active in production with 905 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the connector family, enabling design flexibility and supply chain optimization.

Substiute Parts

SFM-107-T1-L-D

Samtec Inc.In Stock: 919SFM-107-T1-L-D Datasheet

Current PartRFQ

SFM-107-01-L-D

Samtec Inc.In Stock: 1514SFM-107-01-L-D Datasheet

SimilarRFQ

SFM-107-01-L-D-A

Samtec Inc.In Stock: 911SFM-107-01-L-D-A Datasheet

SimilarRFQ

SFM-107-01-L-D-DS

Samtec Inc.In Stock: 1441SFM-107-01-L-D-DS Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SFM-107-T1-L-D are qualified based on strict equivalence of the following parameters:

• Connector type (Receptacle)
• Number of positions (14)
• Pitch - mating (0.050" / 1.27mm)
• Number of rows (2)
• Row spacing - mating (0.050" / 1.27mm)
• Mounting type (Through Hole)
• Contact finish - mating (Gold)
• Current rating (3.2A per Contact)
• Voltage rating (250VAC)
• Operating temperature range (-55°C ~ 125°C)
• Material flammability rating (UL94 V-0)
• RoHS compliance status (ROHS3 Compliant)

The three identified substitutes—SFM-107-01-L-D, SFM-107-01-L-D-A, and SFM-107-01-L-D-DS—maintain all critical electrical and mechanical parameters. Differences exist only in optional features (board guide, mounting flange, mounting hardware) and REACH compliance status, which do not affect core connector functionality.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts maintain full electrical and mechanical compatibility with the SFM-107-T1-L-D. Selection between these options depends on application-specific requirements:

SFM-107-01-L-D is the baseline equivalent with no additional features. This part is REACH Unaffected and provides the most straightforward substitution path.

SFM-107-01-L-D-A includes a board guide feature and is REACH Unaffected. This variant is suitable for applications requiring enhanced mechanical alignment during mating.

SFM-107-01-L-D-DS includes mounting flange and mounting hardware features and is REACH Affected. This variant is appropriate for applications requiring panel-mount or fixed-position installation.

All parts are ROHS3 compliant and rated for identical electrical performance (3.2A per contact, 250VAC) across the full operating temperature range (-55°C ~ 125°C). Selection should be based on mechanical mounting requirements and regulatory compliance status for the target application.

Frequently Asked Questions (FAQ)

Q: Can SFM-107-01-L-D be used as a direct replacement for SFM-107-T1-L-D?

A: Yes. Both parts maintain identical electrical ratings (3.2A per contact, 250VAC), connector geometry (14 positions, 0.050" pitch, 2 rows), and material specifications (UL94 V-0, ROHS3 compliant). The SFM-107-01-L-D is a direct functional equivalent.

Q: What is the difference between SFM-107-01-L-D-A and SFM-107-01-L-D-DS?

A: SFM-107-01-L-D-A includes a board guide feature for improved alignment. SFM-107-01-L-D-DS includes mounting flange and mounting hardware for panel-mount applications. Both maintain identical electrical specifications and core connector parameters.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. SFM-107-T1-L-D, SFM-107-01-L-D, SFM-107-01-L-D-A, and SFM-107-01-L-D-DS are all ROHS3 compliant.

Q: What is the difference in REACH status between these parts?

A: SFM-107-T1-L-D and SFM-107-01-L-D are REACH Unaffected. SFM-107-01-L-D-A is REACH Unaffected. SFM-107-01-L-D-DS is REACH Affected. REACH status should be verified against specific regulatory requirements for the target market.

Q: Do all parts share the same mated stacking heights?

A: Yes. All parts support identical mated stacking heights: 6.02mm, 6.17mm, 7.80mm, 7.95mm, 9.58mm, 9.73mm, 11.48mm, and 11.63mm.

Q: Can these connectors be used interchangeably in the same PCB design?

A: SFM-107-01-L-D and SFM-107-01-L-D-A can be used interchangeably in standard through-hole PCB designs. SFM-107-01-L-D-DS requires PCB design modifications to accommodate the mounting flange and hardware.