SFF2001GHC0G Equivalent & Substitute Parts

Part Overview

The SFF2001GHC0G is a general-purpose rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 50 V DC reverse voltage and 20 A average rectified current in a through-hole TO-220-3 Full Pack isolated tab package. This component is classified as discontinued at DiGi Electronics, necessitating identification of equivalent alternatives for ongoing design requirements and procurement needs. The part meets automotive-grade specifications with AEC-Q101 qualification and is ROHS3 compliant.

Substiute Parts

SFF2001GHC0G

Taiwan Semiconductor CorporationIn Stock: 784SFF2001GHC0G Datasheet

Current PartRFQ

SFF2001GH

Taiwan Semiconductor CorporationIn Stock: 1016SFF2001GH Datasheet

DirectRFQ

SFF2001G C0G

Taiwan Semiconductor CorporationIn Stock: 1204SFF2001G C0G Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the SFF2001GHC0G is determined by strict equivalence across the following electrical and mechanical parameters:

Critical Substitution Parameters:

• Voltage - DC Reverse (Vr) (Max): 50 V
• Current - Average Rectified (Io): 20 A
• Voltage - Forward (Vf) (Max) @ If: 975 mV @ 10 A
• Reverse Recovery Time (trr): 35 ns
• Current - Reverse Leakage @ Vr: 10 µA @ 50 V
• Speed Classification: Fast Recovery ≤ 500ns, > 200mA (Io)
• Operating Temperature - Junction: -55°C to 150°C
• Package / Case: TO-220-3 Full Pack, Isolated Tab
• Mounting Type: Through Hole
• Grade: Automotive
• Qualification: AEC-Q101
• RoHS Status: ROHS3 Compliant

Identified substitute parts maintain identical electrical ratings and mechanical specifications. Substitutes are grouped by configuration type: single diode versus diode array with common cathode topology.

Parameter Comparison

Engineering Selection Recommendations

SFF2001GC0G (Parametric Equivalent): This part is the primary substitute for the discontinued SFF2001GHC0G. Both components are single-diode configurations with identical electrical specifications and mechanical packaging. The SFF2001GC0G maintains active product status and is immediately available. All compliance certifications, including AEC-Q101 automotive qualification and ROHS3 compliance, are equivalent. This part provides direct functional replacement with no circuit topology modifications required.

SFF2001GH (Direct Substitute - Configuration Dependent): This part shares identical electrical ratings and packaging but features a diode array configuration with 1 pair common cathode topology. Selection of this part requires circuit design compatibility with the common cathode configuration. The part is active and available. All automotive-grade certifications and compliance requirements are maintained. This substitute is applicable only when the circuit design accommodates or benefits from the dual-diode common cathode topology.

Frequently Asked Questions (FAQ)

Q: Can SFF2001GC0G directly replace SFF2001GHC0G in existing designs?

A: Yes. The SFF2001GC0G is a parametric equivalent with identical electrical specifications (50 V, 20 A, 975 mV forward voltage, 35 ns recovery time) and mechanical packaging (TO-220-3 Full Pack, isolated tab, through-hole mounting). No circuit modifications are required.

Q: What is the key difference between SFF2001GH and the other substitutes?

A: The SFF2001GH is a diode array with 1 pair common cathode configuration, whereas SFF2001GHC0G and SFF2001GC0G are single-diode devices. The common cathode topology requires circuit design compatibility. All three parts share identical per-diode electrical ratings and automotive-grade certifications.

Q: Are all substitute parts automotive-qualified?

A: Yes. All identified substitutes (SFF2001GH and SFF2001GC0G) carry AEC-Q101 automotive qualification and automotive-grade classification, matching the original SFF2001GHC0G specification.

Q: Do the substitute parts maintain the same thermal and environmental operating range?

A: Yes. All substitutes operate across the identical junction temperature range of -55°C to 150°C. Moisture sensitivity level (MSL 1 - Unlimited), REACH status (REACH Unaffected), and RoHS compliance (ROHS3) are equivalent across all parts.

Q: Is the TO-220-3 Full Pack isolated tab package identical across all parts?

A: Yes. All identified substitutes use the identical TO-220-3 Full Pack isolated tab package with through-hole mounting. PCB layout and thermal management considerations remain unchanged.

Q: Why is SFF2001GC0G recommended over SFF2001GH for direct replacement?

A: The SFF2001GC0G maintains the single-diode configuration of the original SFF2001GHC0G, eliminating the need for circuit topology evaluation. Both parts are parametrically identical. The SFF2001GH requires circuit design verification due to its common cathode diode array configuration.