SF53-AP General Purpose Rectifier Diode Equivalent & Substitute Parts

Part Overview

The SF53-AP is a general purpose rectifier diode manufactured by Micro Commercial Co, rated for 150V DC reverse voltage and 5A average rectified current in a DO-201AD axial through-hole package. This component is classified as obsolete, necessitating identification of active equivalent and substitute parts for ongoing design requirements and procurement needs. The SF53-AP operates across a junction temperature range of -55°C to 150°C and complies with RoHS3 standards.

Key Parameters

Parameter	Value	Unit
Voltage - DC Reverse (Vr) (Max)	150	V
Current - Average Rectified (Io)	5	A
Voltage - Forward (Vf) (Max) @ If	950 mV @ 5 A	mV
Reverse Recovery Time (trr)	35	ns
Current - Reverse Leakage @ Vr	5	µA @ 150 V
Package / Case	DO-201AD, Axial	—
Mounting Type	Through Hole	—
Operating Temperature - Junction	-55 to 150	°C
RoHS Status	ROHS3 Compliant	—

Substitute Part Grouping Explanation

Substitution of the SF53-AP is determined by equivalence in the following critical electrical and mechanical parameters:

Primary Substitution Criteria:

Voltage - DC Reverse (Vr) (Max): 150V minimum
Current - Average Rectified (Io): 5A minimum
Package / Case: DO-201AD, Axial
Mounting Type: Through Hole
Technology: Standard rectifier diode

Secondary Compatibility Factors:

Reverse Recovery Time (trr): ≤ 500ns (Fast Recovery classification)
Voltage - Forward (Vf) (Max): ≤ 950 mV at rated current
Current - Reverse Leakage: ≤ 5 µA @ 150V
Operating Temperature Range: Must encompass application requirements
RoHS3 Compliance: Required for regulatory alignment

Parts are classified as direct equivalents when all primary criteria are met with identical electrical specifications. Parts are classified as similar substitutes when primary criteria are met but secondary parameters differ within acceptable engineering tolerances.

Parameter Comparison

Parameter	SF53-AP (Main)	SF53G-AP (Direct)	SF33GHA0G (Similar)
Manufacturer	Micro Commercial Co	Micro Commercial Co	Taiwan Semiconductor Corporation
Product Status	Obsolete	Active	Active
Voltage - DC Reverse (Vr) (Max)	150 V	150 V	150 V
Current - Average Rectified (Io)	5 A	5 A	3 A
Voltage - Forward (Vf) (Max) @ If	950 mV @ 5 A	950 mV @ 5 A	950 mV @ 3 A
Reverse Recovery Time (trr)	35 ns	35 ns	35 ns
Current - Reverse Leakage @ Vr	5 µA @ 150 V	5 µA @ 150 V	5 µA @ 150 V
Capacitance @ Vr, F	45 pF @ 4V, 1MHz	50 pF @ 4V, 1MHz	80 pF @ 4V, 1MHz
Package / Case	DO-201AD, Axial	DO-201AD, Axial	DO-201AD, Axial
Mounting Type	Through Hole	Through Hole	Through Hole
Operating Temperature - Junction	-55°C ~ 150°C	-65°C ~ 150°C	-55°C ~ 150°C
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Grade	—	—	Automotive
Qualification	—	—	AEC-Q101

Engineering Selection Recommendations

SF53G-AP (Direct Equivalent - Recommended Primary Substitute)

The SF53G-AP is the direct equivalent replacement for the obsolete SF53-AP. Both components are manufactured by Micro Commercial Co and share identical electrical specifications across all primary parameters: 150V reverse voltage, 5A average rectified current, 950mV forward voltage drop, and 35ns reverse recovery time. The SF53G-AP is currently in active production status, ensuring long-term availability and supply chain continuity. The extended operating temperature range (-65°C to 150°C versus -55°C to 150°C) provides additional thermal margin. Both parts maintain RoHS3 compliance. The minor capacitance increase (50pF versus 45pF) is within standard engineering tolerance for general purpose rectifier applications. This part is suitable for direct substitution without circuit redesign.

SF33GHA0G (Similar Substitute - Application-Dependent)

The SF33GHA0G from Taiwan Semiconductor Corporation is a similar substitute applicable only to circuits where the 5A current rating is not a hard requirement. This part is rated for 3A average rectified current, representing a 40% reduction in current capacity compared to the SF53-AP. The SF33GHA0G maintains the same 150V reverse voltage rating, 35ns reverse recovery time, and RoHS3 compliance. This part carries automotive-grade qualification (AEC-Q101), making it suitable for automotive applications where the SF53-AP and SF53G-AP may not be qualified. The higher capacitance (80pF versus 45pF) may affect high-frequency circuit performance. Use this substitute only when circuit current requirements do not exceed 3A and automotive qualification is required.

Frequently Asked Questions (FAQ)

Q: Can SF53G-AP be used as a direct replacement for SF53-AP without any circuit modifications?

A: Yes. The SF53G-AP is a direct equivalent with identical electrical specifications for voltage rating, current capacity, forward voltage drop, and recovery time. Both components use the same DO-201AD axial through-hole package. No circuit modifications are required for substitution.

Q: What is the primary difference between SF53G-AP and SF53-AP?

A: The SF53-AP is obsolete while SF53G-AP is in active production. The SF53G-AP also features an extended lower operating temperature limit (-65°C versus -55°C). All other electrical and mechanical specifications are identical.

Q: Can SF33GHA0G replace SF53-AP in all applications?

A: No. The SF33GHA0G is rated for 3A average rectified current, while SF53-AP is rated for 5A. Substitution is only valid for circuits where the maximum required current does not exceed 3A. Using SF33GHA0G in a 5A application will result in component overstress and potential failure.

Q: What is the significance of the automotive qualification on SF33GHA0G?

A: The SF33GHA0G carries AEC-Q101 automotive qualification, indicating it meets automotive industry reliability and testing standards. The SF53-AP and SF53G-AP do not carry this qualification. Use SF33GHA0G only when automotive-grade components are specified in the design requirements.

Q: Are all three parts RoHS3 compliant?

A: Yes. SF53-AP, SF53G-AP, and SF33GHA0G are all RoHS3 compliant, meeting current environmental and regulatory requirements for lead-free electronics manufacturing.

Q: How does the capacitance difference between these parts affect circuit performance?

A: The SF53-AP has 45pF capacitance, SF53G-AP has 50pF, and SF33GHA0G has 80pF, all measured at 4V and 1MHz. In general purpose rectifier applications, these differences are typically negligible. In high-frequency switching circuits or precision timing applications, the higher capacitance of SF33GHA0G may introduce measurable effects on circuit behavior.

Q: What is the moisture sensitivity level for these diodes?

A: All three parts have Moisture Sensitivity Level (MSL) 1, indicating unlimited shelf life without moisture control measures. Standard handling and storage practices are sufficient.

Q: Are there any supply chain advantages to choosing one substitute over another?

A: SF53G-AP has 1029 pieces in stock, while SF33GHA0G has 889 pieces in stock. Both are currently available. SF53G-AP is the preferred choice for direct replacement due to identical specifications and active production status from the original manufacturer.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message