SF2007PTHC0G Equivalent & Substitute Parts

Part Overview

The SF2007PTHC0G is a general-purpose rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 500 V DC reverse voltage and 20 A average rectified current in a through-hole TO-247-3 package. This component is classified as discontinued at DiGi Electronics, necessitating identification of equivalent and substitute parts for ongoing design requirements and procurement needs. The part meets automotive-grade specifications with AEC-Q101 qualification and maintains ROHS3 compliance.

Substiute Parts

SF2007PTHC0G

Taiwan Semiconductor CorporationIn Stock: 793SF2007PTHC0G Datasheet

Current PartRFQ

SF2007PTH

Taiwan Semiconductor CorporationIn Stock: 1178SF2007PTH Datasheet

DirectRFQ

SF2007PT C0G

Taiwan Semiconductor CorporationIn Stock: 1044SF2007PT C0G Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the SF2007PTHC0G is determined by strict equivalence across the following critical parameters:

Electrical Parameters (Must Match):

• Voltage - DC Reverse (Vr) (Max): 500 V
• Current - Average Rectified (Io): 20 A
• Voltage - Forward (Vf) (Max) @ If: 1.9 V @ 20 A
• Reverse Recovery Time (trr): 35 ns
• Current - Reverse Leakage @ Vr: 10 µA @ 500 V
• Speed Classification: Fast Recovery ≤ 500ns, > 200mA (Io)

Mechanical Parameters (Must Match):

• Package / Case: TO-247-3
• Mounting Type: Through Hole
• Supplier Device Package: TO-247AD (TO-3P)

Compliance Parameters (Must Match):

• Grade: Automotive
• Qualification: AEC-Q101
• RoHS Status: ROHS3 Compliant
• Operating Temperature - Junction: -55°C to 150°C

Substitute parts are identified based on identical electrical performance, mechanical compatibility, and automotive-grade certification. Configuration differences (such as diode array versus single diode) are noted as functional variations that may affect circuit integration requirements.

Parameter Comparison

Engineering Selection Recommendations

SF2007PTH (Direct Substitute): This part is the primary substitute for the discontinued SF2007PTHC0G. It maintains identical electrical specifications, automotive-grade certification, and AEC-Q101 qualification. The SF2007PTH is currently active in inventory with 1082 pieces available. The functional difference is the diode configuration: SF2007PTH contains a 1 Pair Common Cathode diode array, whereas SF2007PTHC0G is a single diode. This configuration difference requires circuit-level evaluation to determine suitability for the intended application. Both parts share the same base product number (SF2007), package type (TO-247-3), and thermal operating range (-55°C to 150°C).

SF2007PT C0G (Parametric Equivalent): This part provides parametric equivalence to the SF2007PTHC0G with identical electrical performance and mechanical compatibility. The SF2007PT C0G is active in inventory with 1015 pieces available and maintains the same single-diode configuration as the main part. All critical parameters—reverse voltage, forward current, forward voltage drop, reverse recovery time, and leakage current—are identical. This part is the preferred substitute when configuration matching is required. Both parts meet automotive-grade specifications and AEC-Q101 qualification standards.

Both substitute parts are ROHS3 compliant and maintain the same moisture sensitivity level (MSL 1 - Unlimited) and REACH unaffected status as the original part.

Frequently Asked Questions (FAQ)

Q: Can SF2007PTH be used as a direct replacement for SF2007PTHC0G?

A: SF2007PTH meets all electrical and mechanical specifications of SF2007PTHC0G. However, SF2007PTH contains a 1 Pair Common Cathode diode array configuration, while SF2007PTHC0G is a single diode. Circuit integration requirements must be evaluated to determine if the array configuration is compatible with the application.

Q: What is the difference between SF2007PTH and SF2007PT C0G?

A: Both parts meet identical electrical specifications (500 V, 20 A, 1.9 V forward voltage, 35 ns recovery time). The primary difference is diode configuration: SF2007PTH is a 1 Pair Common Cathode array, while SF2007PT C0G is a single diode matching the original SF2007PTHC0G configuration. SF2007PT C0G is the parametric equivalent when configuration matching is required.

Q: Are all substitute parts automotive-grade qualified?

A: Yes. Both SF2007PTH and SF2007PT C0G carry automotive-grade classification with AEC-Q101 qualification, matching the original SF2007PTHC0G specification.

Q: Do the substitute parts have the same package and mounting type?

A: Yes. All parts use the TO-247-3 package with TO-247AD (TO-3P) supplier device package designation and through-hole mounting type. PCB layout and thermal management considerations remain identical.

Q: What is the operating temperature range for substitute parts?

A: Both substitute parts operate across the same junction temperature range as the original part: -55°C to 150°C.

Q: Are the substitute parts ROHS3 compliant?

A: Yes. Both SF2007PTH and SF2007PT C0G are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity level, matching the original part's environmental compliance status.

Q: Which substitute part should be selected for new designs?

A: SF2007PT C0G is recommended for new designs requiring single-diode configuration matching. SF2007PTH is suitable when the 1 Pair Common Cathode array configuration meets circuit requirements and provides higher inventory availability.