SF1007GHC0G Equivalent & Substitute Parts

Part Overview

The SF1007GHC0G is a general-purpose rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 500 V DC reverse voltage and 10 A average rectified current in a Through Hole TO-220AB package. This component is classified as discontinued at DiGi Electronics, necessitating identification of equivalent substitute parts for ongoing design requirements and procurement needs. The part carries automotive-grade qualification (AEC-Q101) and maintains ROHS3 compliance.

Substiute Parts

SF1007GHC0G

Taiwan Semiconductor CorporationIn Stock: 898SF1007GHC0G Datasheet

Current PartRFQ

SF1007GH

Taiwan Semiconductor CorporationIn Stock: 910SF1007GH Datasheet

DirectRFQ

SF1007G C0G

Taiwan Semiconductor CorporationIn Stock: 738SF1007G C0G Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SF1007GHC0G are identified based on strict electrical and mechanical parameter equivalence. The critical parameters determining substitution eligibility are:

Electrical Parameters:

• Voltage - DC Reverse (Vr) (Max): 500 V
• Current - Average Rectified (Io): 10 A
• Voltage - Forward (Vf) (Max) @ If: 1.7 V @ 5 A
• Reverse Recovery Time (trr): 35 ns
• Current - Reverse Leakage @ Vr: 10 µA @ 500 V

Mechanical Parameters:

• Package / Case: TO-220-3
• Mounting Type: Through Hole
• Supplier Device Package: TO-220AB

Compliance Parameters:

• Grade: Automotive
• Qualification: AEC-Q101
• RoHS Status: ROHS3 Compliant

Parts meeting all these criteria are classified as direct parametric equivalents. The SF1007GH variant, while sharing the same electrical ratings and package, differs in diode configuration (1 Pair Common Cathode array versus single general-purpose diode) and is therefore listed as a direct manufacturer alternative rather than a true parametric equivalent.

Parameter Comparison

Engineering Selection Recommendations

SF1007G C0G is the primary parametric equivalent for SF1007GHC0G replacement. This part maintains identical electrical specifications, thermal operating range, package configuration, and automotive-grade qualification. The SF1007G C0G is currently in active product status, ensuring availability for procurement and design continuity. Both parts carry AEC-Q101 qualification and ROHS3 compliance, meeting regulatory and quality requirements for automotive applications.

SF1007GH is available as a direct manufacturer alternative from Taiwan Semiconductor Corporation. While this part shares the same voltage, current, and thermal ratings, it is configured as a diode array with 1 Pair Common Cathode topology rather than a single general-purpose diode. Selection of SF1007GH requires circuit design compatibility with the common cathode configuration and is appropriate only when the application circuit can accommodate dual-diode array functionality. This part is also in active product status.

For direct pin-for-pin and functional replacement in existing designs, SF1007G C0G is the appropriate selection. For applications requiring dual-diode functionality, SF1007GH provides equivalent electrical performance within the same package footprint.

Frequently Asked Questions (FAQ)

Q: Can SF1007G C0G be used as a direct replacement for SF1007GHC0G?

A: Yes. SF1007G C0G meets all electrical and mechanical parameters of SF1007GHC0G, including 500 V reverse voltage rating, 10 A average rectified current, 1.7 V forward voltage at 5 A, 35 ns reverse recovery time, and identical TO-220-3 package configuration. Both parts carry AEC-Q101 automotive qualification and ROHS3 compliance.

Q: What is the difference between SF1007GHC0G and SF1007GH?

A: The primary difference is diode configuration. SF1007GHC0G is a single general-purpose diode, while SF1007GH is a diode array configured as 1 Pair Common Cathode. Both share identical electrical ratings (500 V, 10 A per diode, 1.7 V forward voltage) and the same TO-220-3 package. Selection depends on circuit topology requirements.

Q: Are all three parts compatible with the same PCB footprint?

A: Yes. SF1007GHC0G, SF1007G C0G, and SF1007GH all use the TO-220-3 package with Through Hole mounting. PCB footprint compatibility is maintained across all three parts. However, circuit schematic compatibility must be confirmed, particularly when substituting the single-diode SF1007GHC0G with the dual-diode array SF1007GH.

Q: Why is SF1007GHC0G discontinued?

A: SF1007GHC0G is listed as discontinued at DiGi Electronics. SF1007G C0G and SF1007GH remain in active product status and are available for procurement.

Q: Do all substitute parts maintain automotive qualification?

A: Yes. SF1007GHC0G, SF1007G C0G, and SF1007GH all carry AEC-Q101 automotive-grade qualification and ROHS3 compliance status.

Q: What are the critical electrical parameters for substitution?

A: The critical parameters are Voltage - DC Reverse (500 V), Current - Average Rectified (10 A), Voltage - Forward (1.7 V @ 5 A), Reverse Recovery Time (35 ns), and Current - Reverse Leakage (10 µA @ 500 V). All substitute parts match these specifications exactly.