SE10FDHM3/I Equivalent & Substitute Parts

Part Overview

The SE10FDHM3/I is a general-purpose rectifier diode manufactured by Vishay General Semiconductor - Diodes Division. This surface mount diode operates at 200 V DC reverse voltage with 1 A average rectified current and is housed in a DO-219AB (SMF) package. The device is classified as Active product status and carries automotive-grade qualification under AEC-Q101 standards. Substitute parts are identified when equivalent electrical and mechanical parameters are required for design flexibility, inventory management, or supply chain continuity while maintaining identical functional performance and compliance certifications.

Substiute Parts

SE10FDHM3/I

Vishay General Semiconductor - Diodes DivisionIn Stock: 813SE10FDHM3/I Datasheet

Current PartRFQ

SE10FD-M3/H

Vishay General Semiconductor - Diodes DivisionIn Stock: 30966SE10FD-M3/H Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SE10FDHM3/I are identified based on electrical and mechanical parameter equivalence. The substitution logic is based on the following critical parameters:

Electrical Parameters:

• Voltage - DC Reverse (Vr) (Max): 200 V
• Current - Average Rectified (Io): 1 A
• Voltage - Forward (Vf) (Max) @ If: 1.05 V @ 1 A
• Reverse Recovery Time (trr): 780 ns
• Current - Reverse Leakage @ Vr: 5 µA @ 200 V
• Capacitance @ Vr, F: 7.5 pF @ 4V, 1MHz

Mechanical Parameters:

• Package / Case: DO-219AB
• Mounting Type: Surface Mount
• Operating Temperature - Junction: -55°C to 175°C

Compliance & Certification:

• Technology: Standard
• Grade: Automotive
• Qualification: AEC-Q101
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

Parts meeting all these parameters are classified as parametric equivalents and direct substitutes.

Parameter Comparison

Engineering Selection Recommendations

The SE10FD-M3/H is a parametric equivalent substitute for the SE10FDHM3/I. Both devices are manufactured by Vishay General Semiconductor - Diodes Division and share identical electrical specifications, mechanical packaging, and compliance certifications.

Selection Basis:

Both parts maintain Active product status and carry AEC-Q101 automotive qualification. Both are ROHS3 compliant and carry MSL 1 (Unlimited) moisture sensitivity rating. The electrical performance is identical across all specified parameters: reverse voltage, forward voltage, reverse recovery time, reverse leakage current, and junction capacitance. The DO-219AB surface mount package and operating temperature range are identical.

The SE10FD-M3/H is suitable for direct substitution in applications where the SE10FDHM3/I is specified, provided that the application requirements align with the stated electrical and thermal parameters.

Frequently Asked Questions (FAQ)

Q: Can SE10FD-M3/H be used as a direct replacement for SE10FDHM3/I?

A: Yes. The SE10FD-M3/H is a parametric equivalent with identical electrical specifications, package type (DO-219AB), mounting configuration (surface mount), operating temperature range (-55°C to 175°C), and compliance certifications (AEC-Q101, ROHS3).

Q: Are there any differences in the package or footprint between these parts?

A: No. Both parts use the DO-219AB (SMF) surface mount package. The mechanical footprint and land pattern are identical.

Q: Do both parts meet automotive qualification requirements?

A: Yes. Both SE10FDHM3/I and SE10FD-M3/H carry AEC-Q101 automotive-grade qualification and are suitable for automotive applications.

Q: What is the reverse voltage rating for both parts?

A: Both parts are rated for 200 V DC reverse voltage (Vr Max).

Q: What is the maximum average rectified current for these diodes?

A: Both parts are rated for 1 A average rectified current (Io).

Q: Are both parts RoHS compliant?

A: Yes. Both parts are ROHS3 compliant.

Q: What is the operating temperature range for these diodes?

A: Both parts operate from -55°C to 175°C junction temperature.

Q: Is there a difference in reverse recovery time between the two parts?

A: No. Both parts have a reverse recovery time (trr) of 780 ns.

Q: What is the forward voltage drop at 1 A for both parts?

A: Both parts have a maximum forward voltage (Vf) of 1.05 V at 1 A.

Q: Are both parts available in tape and reel packaging?

A: Yes. Both parts are supplied in Tape & Reel (TR) packaging for automated assembly.