SDCL1608C1N2STDF Equivalent & Substitute Parts

Part Overview

The SDCL1608C1N2STDF is a 1.2 nH unshielded multilayer ceramic inductor manufactured by Shenzhen Sunlord Electronics Co., Ltd. in the 0603 (1608 Metric) surface mount package. This component is rated for 500 mA maximum current with 50 mOhm maximum DC resistance and operates across the temperature range of -55°C to 125°C. The part is currently in active production status with 1008 pieces available in inventory.

Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained across critical parameters including inductance value, tolerance, package dimensions, and operating temperature range. Substitute selection ensures design continuity when primary component availability is limited or when alternative sourcing is required.

Substiute Parts

SDCL1608C1N2STDF

Shenzhen Sunlord Electronics Co., Ltd.In Stock: 1093SDCL1608C1N2STDF Datasheet

Current PartRFQ

BSCH001608081N2S00

Pulse ElectronicsIn Stock: 17370BSCH001608081N2S00 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SDCL1608C1N2STDF are identified based on strict equivalence across the following critical parameters:

Electrical Equivalence Criteria:

• Inductance value: 1.2 nH
• Inductance tolerance: ±0.3 nH
• Operating temperature range: -55°C to 125°C
• Self-resonant frequency: 10 GHz
• Q factor at 100 MHz: 8

Mechanical Equivalence Criteria:

• Package / Case: 0603 (1608 Metric)
• Physical dimensions: 1.60 mm L × 0.80 mm W
• Maximum seated height: 0.95 mm
• Mounting type: Surface Mount
• Moisture Sensitivity Level: 1 (Unlimited)

Functional Equivalence Criteria:

• Type: Multilayer
• Material - Core: Ceramic
• Shielding: Unshielded

Substitute parts must maintain compatibility across all three equivalence categories. Variations in current rating and DC resistance are permitted when the substitute part meets or exceeds the performance envelope of the primary component.

Parameter Comparison

Engineering Selection Recommendations

Both the SDCL1608C1N2STDF and BSCH001608081N2S00 are active production components with identical electrical and mechanical specifications across inductance, tolerance, package dimensions, operating temperature, and resonant frequency characteristics.

The BSCH001608081N2S00 substitute part from Pulse Electronics provides enhanced current handling capability at 600 mA compared to the primary part's 500 mA rating. The substitute exhibits higher DC resistance at 100 mOhm maximum versus 50 mOhm maximum on the primary component. Both parts maintain equivalent performance in terms of inductance accuracy, frequency response, and thermal operating range.

The BSCH001608081N2S00 carries ROHS3 compliance and REACH unaffected status, confirming regulatory alignment with current environmental standards. Both components are classified under ECCN EAR99 and HTSUS 8504.50.8000.

Selection between these parts depends on application-specific requirements regarding current capacity and acceptable DC resistance levels. The substitute part is suitable for applications requiring higher current margins or where the increased DC resistance does not impact circuit performance.

Frequently Asked Questions (FAQ)

Q: Can the BSCH001608081N2S00 be used as a direct replacement for the SDCL1608C1N2STDF?

A: Yes. Both parts share identical inductance values (1.2 nH), inductance tolerance (±0.3 nH), package dimensions (0603 / 1608 Metric), operating temperature range (-55°C to 125°C), and frequency characteristics (10 GHz self-resonant frequency, 8 Q @ 100 MHz). Physical board layout compatibility is maintained across all mounting and dimensional parameters.

Q: What are the differences between these two parts?

A: The primary differences are current rating and DC resistance. The BSCH001608081N2S00 provides 600 mA current rating versus 500 mA on the SDCL1608C1N2STDF, and exhibits 100 mOhm maximum DC resistance compared to 50 mOhm on the primary part. The substitute part also carries explicit ROHS3 and REACH compliance documentation.

Q: Are there any package or footprint differences?

A: No. Both parts use the 0603 (1608 Metric) surface mount package with identical physical dimensions of 1.60 mm length × 0.80 mm width and maximum seated height of 0.95 mm. PCB footprints and reflow profiles are interchangeable.

Q: Does the higher DC resistance of the substitute part affect circuit performance?

A: DC resistance impact depends on circuit application. The 100 mOhm maximum resistance on the BSCH001608081N2S00 versus 50 mOhm on the SDCL1608C1N2STDF represents a 50 mOhm difference. Circuit designers must evaluate whether this resistance increase affects impedance matching, signal integrity, or power dissipation requirements specific to the application.

Q: Are both parts available in the same packaging format?

A: Yes. Both the SDCL1608C1N2STDF and BSCH001608081N2S00 are supplied in Tape & Reel (TR) packaging suitable for automated assembly processes.

Q: What is the moisture sensitivity classification for these parts?

A: Both parts carry Moisture Sensitivity Level (MSL) 1 classification, indicating unlimited shelf life without moisture control requirements.