SDCL1005C5N6STDF Equivalent & Substitute Parts

Part Overview

The SDCL1005C5N6STDF is a 5.6 nH unshielded multilayer ceramic inductor manufactured by Shenzhen Sunlord Electronics Co., Ltd. This surface mount component is rated for 300 mA continuous current with a maximum DC resistance of 300 mOhm and operates across the temperature range of -55°C to 125°C. The part is classified as Active product status with unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified to provide alternative sourcing options when the primary component is unavailable or when design requirements permit equivalent electrical and mechanical specifications.

Substiute Parts

SDCL1005C5N6STDF

Shenzhen Sunlord Electronics Co., Ltd.In Stock: 90165SDCL1005C5N6STDF Datasheet

Current PartRFQ

BSCH001005055N6SCS

Pulse ElectronicsIn Stock: 20871BSCH001005055N6SCS Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SDCL1005C5N6STDF are identified based on strict equivalence of the following critical parameters:

Mandatory Matching Parameters:

• Inductance value: 5.6 nH
• Inductance tolerance: ±0.3 nH
• Package / Case: 0402 (1005 Metric)
• Mounting type: Surface Mount
• Core material: Ceramic
• Shielding configuration: Unshielded
• Type: Multilayer
• Operating temperature range: -55°C to 125°C
• Inductance test frequency: 100 MHz

Allowable Parameter Variations: Substitute parts may exceed the main part specifications in the following parameters without compromising functional compatibility:

• Current rating (higher values acceptable)
• DC resistance (lower values acceptable)
• Self resonant frequency (higher values acceptable)
• Q factor (equal or higher values acceptable)
• Physical height (within package envelope)

The BSCH001005055N6SCS from Pulse Electronics meets all mandatory matching criteria and provides improved electrical performance in current handling and DC resistance characteristics.

Parameter Comparison

Engineering Selection Recommendations

Primary Part: SDCL1005C5N6STDF

The SDCL1005C5N6STDF remains the specified component for applications where the exact current rating of 300 mA and DC resistance specification of 300 mOhm maximum are design requirements. This part is Active product status with 90,100 pieces in current inventory.

Substitute Part: BSCH001005055N6SCS

The BSCH001005055N6SCS from Pulse Electronics is a direct functional substitute for applications where the design specifications permit higher current handling (400 mA) and lower DC resistance (200 mOhm maximum). This part is Active product status with ROHS3 compliance and REACH Unaffected designation. The substitute provides improved electrical performance characteristics while maintaining identical inductance, tolerance, package, and operating temperature specifications. The reduced physical height (0.024" versus 0.026") presents no compatibility issues within the 0402 package envelope.

Both parts are classified as EAR99 export control and share identical HTSUS tariff classification (8504.50.8000).

Frequently Asked Questions (FAQ)

Q: Can the BSCH001005055N6SCS replace the SDCL1005C5N6STDF in all applications?

A: The BSCH001005055N6SCS is a functional substitute when the application design specifications permit a current rating of 400 mA or higher and a maximum DC resistance of 200 mOhm or lower. If the design requires exactly 300 mA current rating or 300 mOhm DC resistance as upper limits, the primary part SDCL1005C5N6STDF must be used.

Q: Are the physical dimensions compatible for PCB assembly?

A: Both parts use the 0402 (1005 Metric) package with identical length (0.039" / 1.00 mm) and width (0.020" / 0.50 mm). The substitute part has a slightly lower seated height (0.024" versus 0.026"), which presents no compatibility issues for standard surface mount assembly processes.

Q: What is the inductance tolerance specification for both parts?

A: Both the SDCL1005C5N6STDF and BSCH001005055N6SCS maintain an inductance tolerance of ±0.3 nH at the 100 MHz test frequency, ensuring equivalent circuit performance in RF and high-frequency applications.

Q: Do both parts operate across the same temperature range?

A: Yes, both parts are rated for operation from -55°C to 125°C, providing identical thermal performance specifications.

Q: What is the difference in Q factor between the two parts?

A: Both parts exhibit a Q factor of 8 at 100 MHz, indicating equivalent frequency response characteristics.

Q: How do the self-resonant frequencies compare?

A: The SDCL1005C5N6STDF has a self-resonant frequency of 4 GHz, while the BSCH001005055N6SCS has a self-resonant frequency of 5.1 GHz. The substitute part provides a higher resonant frequency, which may be advantageous in applications requiring extended high-frequency performance.

Q: Are there any compliance or certification differences?

A: The BSCH001005055N6SCS carries ROHS3 compliance and REACH Unaffected designation. Both parts are classified as EAR99 for export control purposes and share the same HTSUS tariff code.

Q: What is the moisture sensitivity rating for both parts?

A: Both parts are rated MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.