SD630CS_S2_00001 Equivalent & Substitute Parts

Part Overview

The SD630CS_S2_00001 is a Schottky diode array manufactured by Panjit International Inc., configured as a 1 Pair Common Cathode device rated for 30 V DC reverse voltage and 6 A average rectified current per diode. The component is housed in a TO-252-3 surface mount package (DPAK with 2 Leads + Tab, SC-63) and is classified as Active product status with full RoHS3 compliance.

Substitute parts become necessary when the primary part number reaches end-of-life status, experiences supply constraints, or when design revisions require alternative sourcing from the same manufacturer's product line. The SD630CS_S2_00001 maintains parametric equivalence with specific alternative part numbers that share identical electrical and mechanical specifications.

Substiute Parts

SD630CS_S2_00001

Panjit International Inc.In Stock: 833SD630CS_S2_00001 Datasheet

Current PartRFQ

SD630CS_L2_00001

Panjit International Inc.In Stock: 4486SD630CS_L2_00001 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SD630CS_S2_00001 is determined by strict parametric matching across all critical electrical and mechanical specifications. The substitute part SD630CS_L2_00001 qualifies as a direct equivalent based on the following criteria:

Matching Parameters (Substitution Basis):

• Diode Configuration: 1 Pair Common Cathode
• Technology: Schottky
• Voltage - DC Reverse (Vr) (Max): 30 V
• Current - Average Rectified (Io) (per Diode): 6 A
• Voltage - Forward (Vf) (Max) @ If: 550 mV @ 3 A
• Speed: Fast Recovery ≤ 500 ns, > 200 mA (Io)
• Current - Reverse Leakage @ Vr: 200 µA @ 30 V
• Operating Temperature - Junction: -55°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: TO-252-3, DPAK (2 Leads + Tab), SC-63
• RoHS Status: RoHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

Both parts share the same base product number (SD630) and are manufactured by Panjit International Inc. The substitute part maintains complete electrical and mechanical compatibility with the primary part number.

Parameter Comparison

Engineering Selection Recommendations

Primary Part (SD630CS_S2_00001): This part maintains Active product status and is recommended for new designs and ongoing production. With 731 pieces in stock, it provides current availability for immediate procurement. Full RoHS3 compliance and REACH Unaffected status confirm regulatory alignment for commercial and industrial applications.

Substitute Part (SD630CS_L2_00001): This part is classified as Obsolete and carries significantly higher inventory (4400 pieces). While it maintains complete parametric equivalence and identical compliance certifications (RoHS3 Compliant, REACH Unaffected), its obsolete status indicates discontinued manufacturer support. This part is suitable for legacy system repairs, field replacements, or applications where existing stock must be utilized. The substitute should not be selected for new production designs.

Both parts are manufactured by Panjit International Inc. and share identical electrical performance, thermal characteristics, and package specifications. Selection between these parts depends on product lifecycle stage and supply chain requirements rather than technical performance differences.

Frequently Asked Questions (FAQ)

Q: Can SD630CS_L2_00001 be used as a direct replacement for SD630CS_S2_00001 in existing designs?

A: Yes. The SD630CS_L2_00001 is a parametric equivalent with identical electrical specifications, thermal ratings, and package configuration. All electrical parameters including reverse voltage (30 V), rectified current (6 A per diode), forward voltage (550 mV @ 3 A), and operating temperature range (-55°C ~ 125°C) are identical. Surface mount compatibility and pin configuration are unchanged.

Q: What is the difference between these two part numbers?

A: The primary difference is product status. SD630CS_S2_00001 is Active, while SD630CS_L2_00001 is Obsolete. Both parts are manufactured by Panjit International Inc., share the same base product number (SD630), and maintain identical Schottky diode array specifications. The suffix variation (S2 versus L2) reflects different manufacturing or distribution batches.

Q: Are there any compliance or regulatory differences between these parts?

A: No. Both parts carry identical compliance certifications: RoHS3 Compliant, REACH Unaffected, ECCN EAR99, and HTSUS 8541.10.0080. Moisture Sensitivity Level is 1 (Unlimited) for both parts, indicating no special handling requirements during storage or assembly.

Q: Which part should be selected for new product development?

A: SD630CS_S2_00001 should be selected for new designs due to its Active product status and ongoing manufacturer support. This ensures long-term availability and continued compliance with evolving regulatory standards.

Q: Can these parts be used interchangeably in PCB assembly?

A: Yes. Both parts use identical TO-252-3 DPAK surface mount packaging with 2 Leads + Tab (SC-63). PCB footprints, solder pad layouts, and assembly processes are identical. No design modifications are required for substitution.

Q: What is the significance of the 1 Pair Common Cathode configuration?

A: This configuration indicates the diode array contains two diodes sharing a common cathode connection. The TO-252-3 package provides three terminals: two anodes (one per diode) and one common cathode. This configuration is suitable for applications requiring dual rectification paths with shared return.

Q: Are there inventory considerations when selecting between these parts?

A: Yes. SD630CS_S2_00001 has 731 pieces in stock, while SD630CS_L2_00001 has 4400 pieces available. For immediate high-volume requirements, the substitute part offers greater availability. However, for ongoing production, the Active part number ensures continued supply from the manufacturer.