SD103ASDM-7 Equivalent & Substitute Parts

Part Overview

The SD103ASDM-7 is a Schottky diode array featuring a 2 pair series connection configuration, rated for 40 V DC reverse voltage and 350 mA average rectified current per diode. The device is packaged in a surface mount SOT-23-6 package and is designed for fast recovery applications with a reverse recovery time of 10 ns.

The SD103ASDM-7 is currently discontinued at DiGi Electronics. Locating equivalent or substitute components is necessary to maintain design continuity and ensure component availability for production and repair applications.

Substiute Parts

SD103ASDM-7

Diodes IncorporatedIn Stock: 850SD103ASDM-7 Datasheet

Current PartRFQ

SD103ASDM-7-F

Diodes IncorporatedIn Stock: 4035SD103ASDM-7-F Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the SD103ASDM-7 is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Diode configuration (2 pair series connection)
• Schottky technology type
• Maximum DC reverse voltage (40 V)
• Average rectified current per diode (350 mA)
• Forward voltage characteristics (600 mV @ 200 mA)
• Reverse recovery time (10 ns)
• Reverse leakage current (5 µA @ 30 V)

Mechanical & Environmental Parameters:

• Surface mount mounting type
• SOT-23-6 package / case
• SOT-26 supplier device package
• Operating temperature range (-65°C ~ 125°C)

The SD103ASDM-7-F is identified as a direct substitute based on identical electrical specifications, mechanical packaging, and environmental ratings. The primary distinction is product status and compliance certification.

Parameter Comparison

Engineering Selection Recommendations

The SD103ASDM-7-F is a direct electrical and mechanical equivalent to the SD103ASDM-7. Both components share identical electrical specifications, package configurations, and environmental operating parameters.

The SD103ASDM-7-F is currently in active product status with confirmed inventory availability, whereas the SD103ASDM-7 is discontinued. The SD103ASDM-7-F carries ROHS3 compliance certification, whereas the original SD103ASDM-7 is RoHS non-compliant. Both components maintain identical REACH and ECCN classifications.

For new designs and production applications requiring this diode array configuration, the SD103ASDM-7-F is the appropriate selection. For legacy system repairs or applications with specific non-compliance requirements, the SD103ASDM-7 may be sourced through secondary market channels if available inventory exists.

Frequently Asked Questions (FAQ)

Q: Can the SD103ASDM-7-F be used as a direct replacement for the SD103ASDM-7?

A: Yes. The SD103ASDM-7-F is electrically and mechanically identical to the SD103ASDM-7 across all specified parameters including voltage ratings, current ratings, forward voltage characteristics, reverse recovery time, and package configuration.

Q: What is the primary difference between these two part numbers?

A: The SD103ASDM-7 is discontinued and RoHS non-compliant, while the SD103ASDM-7-F is an active product with ROHS3 compliance certification. All electrical and mechanical specifications are identical.

Q: Are there any package or pinout differences between these components?

A: No. Both components use the SOT-23-6 package with SOT-26 supplier device package designation. Pinout and mechanical dimensions are identical.

Q: What packaging options are available for the SD103ASDM-7-F?

A: The SD103ASDM-7-F is available in Cut Tape (CT) and Digi-Reel® packaging formats.

Q: Are the moisture sensitivity levels the same?

A: Yes. Both the SD103ASDM-7 and SD103ASDM-7-F carry an MSL rating of 1 (Unlimited), indicating no moisture sensitivity restrictions.

Q: Can these components be used in applications requiring RoHS compliance?

A: The SD103ASDM-7-F is ROHS3 compliant and suitable for RoHS-regulated applications. The SD103ASDM-7 is RoHS non-compliant and is not suitable for such applications.