SD101CW Equivalent & Substitute Parts

Part Overview

The SD101CW is a Schottky rectifier diode manufactured by Taiwan Semiconductor Corporation, designed for surface mount applications in the SOD-123 package. This component operates at a maximum reverse voltage of 40V with an average rectified current rating of 15mA, making it suitable for low-current signal and power rectification circuits. The part is currently active in production with full RoHS3 compliance and REACH unaffected status. Equivalent and substitute parts are identified to provide design flexibility, accommodate supply chain variations, and support applications requiring higher current ratings or automotive-grade qualification.

Key Parameters

Parameter	Value	Unit
Voltage - DC Reverse (Vr) (Max)	40	V
Current - Average Rectified (Io)	15	mA
Voltage - Forward (Vf) (Max) @ If	900 mV @ 15 mA	mV
Reverse Recovery Time (trr)	1	ns
Current - Reverse Leakage @ Vr	200	nA @ 40 V
Capacitance @ Vr, F	2.2	pF @ 0V, 1MHz
Package / Case	SOD-123	-
Operating Temperature - Junction	-65 to 125	°C
Technology	Schottky	-
RoHS Status	ROHS3 Compliant	-

Substitute Part Grouping Explanation

Substitution of the SD101CW is determined by the following critical parameters: reverse voltage rating (40V maximum), package type (SOD-123), technology (Schottky), and surface mount mounting type. Substitute parts must maintain or exceed the 40V reverse voltage specification and operate within compatible temperature ranges.

The identified substitute parts fall into two functional categories:

Category 1: Direct Current Rating Equivalents (500mA) Parts MBR0540T1G and NRVB0540T3G both feature 500mA average rectified current ratings, representing a 33-fold increase over the SD101CW. These parts maintain the 40V reverse voltage specification and SOD-123 package format. The NRVB0540T3G includes automotive-grade qualification (AEC-Q101) and is supplied in Tape & Reel packaging, while MBR0540T1G is supplied in Cut Tape & Digi-Reel format.

Category 2: Higher Current Rating (1A) Part XBS104S14R-G features a 1A average rectified current rating with 40V reverse voltage specification. This part uses the SOD-123A package variant and includes fast recovery characteristics with 25ns reverse recovery time. It is supplied in Cut Tape & Digi-Reel packaging.

All substitute parts maintain Schottky technology, RoHS3 compliance, and REACH unaffected status. Substitution is valid when circuit design permits higher current ratings and forward voltage characteristics of the substitute part.

Parameter Comparison

Parameter	SD101CW (Taiwan Semiconductor)	MBR0540T1G (onsemi)	NRVB0540T3G (onsemi)	XBS104S14R-G (Torex)
Manufacturer	Taiwan Semiconductor Corporation	onsemi	onsemi	Torex Semiconductor Ltd
Voltage - DC Reverse (Vr) (Max)	40 V	40 V	40 V	40 V
Current - Average Rectified (Io)	15 mA	500 mA	500 mA	1 A
Voltage - Forward (Vf) (Max) @ If	900 mV @ 15 mA	510 mV @ 500 mA	510 mV @ 500 mA	540 mV @ 1 A
Technology	Schottky	Schottky	Schottky	Schottky
Package / Case	SOD-123	SOD-123	SOD-123	SOD-123
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Operating Temperature - Junction	-65 to 125°C	-55 to 150°C	-55 to 150°C	Max 125°C
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Packaging Format	Tape & Reel (TR)	Cut Tape (CT) & Digi-Reel®	Tape & Reel (TR)	Cut Tape (CT) & Digi-Reel®
Product Status	Active	Active	Active	Active
Automotive Grade	-	-	AEC-Q101 Qualified	-

Engineering Selection Recommendations

For Standard Industrial Applications: MBR0540T1G and NRVB0540T3G are suitable substitutes when circuit requirements permit higher current ratings. Both parts maintain the 40V reverse voltage specification and SOD-123 package compatibility. MBR0540T1G is recommended for applications requiring Cut Tape packaging, while NRVB0540T3G is recommended for Tape & Reel supply chain requirements.

For Automotive Applications: NRVB0540T3G is the appropriate substitute when automotive-grade qualification is required. This part carries AEC-Q101 qualification and is supplied in Tape & Reel format, meeting automotive supply chain standards.

For Higher Current Density Applications: XBS104S14R-G provides 1A current rating with 40V reverse voltage specification. This part uses the SOD-123A package variant and includes fast recovery characteristics. Selection of this part requires verification that the SOD-123A package footprint is compatible with the application PCB design.

Compliance Considerations: All identified substitute parts maintain RoHS3 compliance and REACH unaffected status, matching the regulatory profile of the SD101CW. All parts are currently in active production status.

Frequently Asked Questions (FAQ)

Q: Can MBR0540T1G be used as a direct replacement for SD101CW? A: MBR0540T1G is electrically compatible as a substitute when the circuit design permits a higher current rating (500mA versus 15mA). The 40V reverse voltage specification, Schottky technology, and SOD-123 package are identical. Forward voltage characteristics differ (510mV @ 500mA versus 900mV @ 15mA), which may affect circuit performance in voltage-sensitive applications.

Q: What is the difference between MBR0540T1G and NRVB0540T3G? A: Both parts share identical electrical specifications (40V, 500mA, Schottky technology, SOD-123 package). The primary differences are: NRVB0540T3G includes AEC-Q101 automotive qualification and is supplied in Tape & Reel format, while MBR0540T1G is supplied in Cut Tape & Digi-Reel format without automotive qualification.

Q: Is XBS104S14R-G compatible with SD101CW applications? A: XBS104S14R-G is electrically compatible when the circuit design permits a 1A current rating. The part maintains the 40V reverse voltage specification and Schottky technology. The SOD-123A package is a variant of SOD-123 and requires verification of PCB footprint compatibility. Forward voltage is 540mV @ 1A, which differs from the SD101CW specification.

Q: What packaging formats are available for substitute parts? A: MBR0540T1G and XBS104S14R-G are supplied in Cut Tape (CT) & Digi-Reel® format. NRVB0540T3G is supplied in Tape & Reel (TR) format, matching the SD101CW packaging format. Packaging selection depends on assembly process requirements and supply chain specifications.

Q: Are all substitute parts RoHS3 compliant? A: Yes. All identified substitute parts (MBR0540T1G, NRVB0540T3G, and XBS104S14R-G) are RoHS3 compliant and REACH unaffected, matching the regulatory compliance of the SD101CW.

Q: What is the temperature operating range for substitute parts? A: MBR0540T1G and NRVB0540T3G operate from -55°C to 150°C junction temperature. XBS104S14R-G operates to a maximum junction temperature of 125°C. The SD101CW operates from -65°C to 125°C. Substitute part selection should verify compatibility with application temperature requirements.

Q: Can substitute parts be used interchangeably in existing designs? A: Substitution requires circuit design verification. All substitute parts maintain the 40V reverse voltage and SOD-123 package compatibility. However, higher current ratings and different forward voltage characteristics may affect circuit performance. PCB layout and thermal management considerations apply when substituting to higher current-rated parts.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message