SD101AW-13-F Equivalent & Substitute Parts

Part Overview

The SD101AW-13-F is a Schottky rectifier diode manufactured by Diodes Incorporated, rated for 60 V DC reverse voltage with 15 mA average rectified current in a surface mount SOD-123 package. This component is classified as obsolete, necessitating identification of equivalent substitute parts for ongoing design requirements and production continuity. Equivalent and substitute parts maintain identical or superior electrical and mechanical specifications while offering active product status and improved availability.

Substiute Parts

SD101AW-13-F

Diodes IncorporatedIn Stock: 990SD101AW-13-F Datasheet

Current PartRFQ

SD101AW-7-F

Diodes IncorporatedIn Stock: 9630SD101AW-7-F Datasheet

Parametric EquivalentRFQ

SD101AW-TP

Micro Commercial CoIn Stock: 10703SD101AW-TP Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SD101AW-13-F are qualified based on strict electrical and mechanical parameter equivalence. The substitution criteria are:

Electrical Parameters (Must Match):

• Voltage - DC Reverse (Vr) (Max): 60 V
• Current - Average Rectified (Io): 15 mA
• Voltage - Forward (Vf) (Max) @ If: 1 V @ 15 mA
• Reverse Recovery Time (trr): 1 ns
• Current - Reverse Leakage @ Vr: 200 nA @ 50 V
• Capacitance @ Vr, F: 2 pF @ 0 V, 1 MHz

Mechanical Parameters (Must Match):

• Package / Case: SOD-123
• Mounting Type: Surface Mount

Compliance Parameters (Must Match):

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

All identified substitute parts meet these criteria and are available in active product status.

Parameter Comparison

Engineering Selection Recommendations

Both SD101AW-7-F and SD101AW-TP are direct electrical and mechanical equivalents to the SD101AW-13-F. Selection between substitute parts is based on the following factors:

SD101AW-7-F (Diodes Incorporated):

• Maintains original manufacturer continuity with Diodes Incorporated
• Active product status with high inventory availability (9594 units)
• Identical operating temperature range (-65°C ~ 125°C)
• Tape & Reel packaging suitable for automated assembly
• ROHS3 compliant with unlimited moisture sensitivity rating

SD101AW-TP (Micro Commercial Co):

• Alternative manufacturer source for supply chain diversification
• Active product status with highest inventory availability (10617 units)
• Maximum operating temperature specified at 125°C
• Tape & Reel packaging suitable for automated assembly
• ROHS3 compliant with unlimited moisture sensitivity rating

Both parts satisfy all electrical specifications, mechanical requirements, and regulatory compliance standards. Selection should be based on procurement strategy, supply chain requirements, and manufacturing process compatibility.

Frequently Asked Questions (FAQ)

Q: Can SD101AW-7-F be used as a direct replacement for SD101AW-13-F?

A: Yes. The SD101AW-7-F is a parametric equivalent with identical electrical characteristics (60 V reverse voltage, 15 mA current rating, 1 V forward voltage, 1 ns recovery time) and mechanical specifications (SOD-123 surface mount package). The primary difference is packaging format (Tape & Reel versus bulk) and active product status.

Q: What is the difference between SD101AW-13-F and SD101AW-TP?

A: Both parts are electrically and mechanically equivalent with identical voltage, current, and switching characteristics. The differences are manufacturer (Diodes Incorporated versus Micro Commercial Co) and operating temperature specification format. SD101AW-13-F specifies -65°C ~ 125°C while SD101AW-TP specifies 125°C maximum. Both support the same junction temperature range.

Q: Are there packaging differences between the substitute parts?

A: Yes. The SD101AW-13-F is supplied in bulk packaging. Both substitute parts (SD101AW-7-F and SD101AW-TP) are supplied in Tape & Reel (TR) format, which is standard for automated surface mount assembly processes.

Q: Do the substitute parts meet the same compliance standards?

A: Yes. All three parts are ROHS3 compliant with Moisture Sensitivity Level 1 (Unlimited). Both substitute parts maintain identical regulatory compliance to the original SD101AW-13-F.

Q: Why is the SD101AW-13-F classified as obsolete?

A: The SD101AW-13-F is listed as obsolete by the manufacturer. The SD101AW-7-F and SD101AW-TP are active products with equivalent specifications and are recommended for new designs and production continuity.

Q: Can these diodes be used interchangeably in PCB assembly?

A: Yes. All three parts use the identical SOD-123 surface mount package with the same pinout and footprint. They are mechanically and electrically interchangeable in PCB designs.

Q: Which substitute part should be selected for new production?

A: Both SD101AW-7-F and SD101AW-TP are suitable for new production. Selection depends on procurement preferences, supply chain strategy, and manufacturing requirements. Both parts offer active product status and high inventory availability.