SCS308AMC Equivalent & Substitute Parts Reference

Part Overview

The SCS308AMC from Rohm Semiconductor is a silicon carbide (SiC) Schottky rectifier diode categorized under Diodes, Rectifiers. It features a reverse voltage rating of 650 V, average rectified current of 8A, and is housed in a TO-220FM through-hole package. This device is ROHS3 compliant, has a high reverse blocking capability, and zero reverse recovery time. The product is currently active and available in inventory. Identification and selection of equivalent or substitute parts become necessary when considering end-of-life status, inventory constraints, or multi-vendor sourcing requirements.

Substiute Parts

SCS308AMC

Rohm SemiconductorIn Stock: 1128SCS308AMC Datasheet

Current PartRFQ

FFSPF0865A

onsemiIn Stock: 2061FFSPF0865A Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SCS308AMC are evaluated strictly by matching key electrical and mechanical parameters:

• Category: Diodes, Rectifiers
• Technology: SiC (Silicon Carbide) Schottky
• Voltage - DC Reverse (Vr): 650 V
• Current - Average Rectified (Io): 8A
• Reverse Recovery Time: 0 ns
• Package / Case: TO-220-2 Full Pack or equivalent
• Mounting Type: Through Hole
• RoHS and REACH compliance

Only parts meeting or exceeding all provided parameters within the same product category and package type are listed as valid substitutes.

Parameter Comparison

Engineering Selection Recommendations

SCS308AMC is active, ROHS3 compliant, and REACH unaffected. FFSPF0865A is ROHS3 compliant, REACH unaffected, but its product status is obsolete.

Frequently Asked Questions (FAQ)

Q1: What are the essential criteria for substituting the SCS308AMC silicon carbide rectifier?
A1: Substitution is determined by matching the diode category, SiC Schottky technology, reverse voltage (650 V), average rectified current (8A), reverse recovery time (0 ns), mounting type (through hole), package/case (TO-220-2 Full Pack or equivalent), and compliance certifications.

Q2: Is package compatibility important when choosing an equivalent part?
A2: Yes. Substitute diodes must utilize a package/case functionally equivalent to TO-220-2 Full Pack and support through-hole mounting to ensure mechanical and layout compatibility.

Q3: How should product status, RoHS, and REACH compliance influence substitute selection?
A3: Active product status and current compliance with RoHS and REACH are important for sourcing and regulatory requirements. Obsolete parts may be considered only if they meet all other technical and compliance parameters.

Q4: Do parameter variations within the allowed ranges affect equivalency?
A4: Only parameters provided in the input determine equivalency. Parts must match or exceed these values in category, technology, voltage, current, package, and compliance.

Q5: Can different forward voltage ratings or reverse leakage currents be acceptable for substitution?
A5: Variations are acceptable if the substitute part falls within the specified requirements and matches all mandatory electrical and mechanical parameters as provided.