Equivalent & Substitute Parts for SCS230AE2HRC

Part Overview

The SCS230AE2HRC, manufactured by Rohm Semiconductor, is an automotive-grade, silicon carbide (SiC) Schottky diode array. It features a 1 Pair Common Cathode configuration, 650 V maximum reverse voltage, and 15A DC current capability in a TO-247-3 through-hole package. The device is RoHS3 compliant and designed for high-speed switching applications, with no reverse recovery time and a maximum junction temperature of 175°C.
This part is currently marked as "Obsolete," requiring the identification of direct alternatives to ensure continuity of design support and maintenance in existing applications.

Substiute Parts

SCS230AE2HRC

Rohm SemiconductorIn Stock: 1176SCS230AE2HRC Datasheet

Current PartRFQ

SCS230AE2HRC11

Rohm SemiconductorIn Stock: 1415SCS230AE2HRC11 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SCS230AE2HRC are selected by matching the following key parameters:

• Diode configuration
• Maximum reverse voltage (Vr)
• Average rectified current (Io)
• Forward voltage (Vf) rating
• Technology type (SiC Schottky)
• Speed (no reverse recovery time)
• Reverse leakage current rating
• Operating junction temperature
• Automotive grade and AEC-Q101 qualification
• Package type (TO-247-3, Through Hole)
• Regulatory statuses (RoHS, MSL, REACH)

Only parts that fully match these parameters are considered as direct substitutes.

Parameter Comparison

Engineering Selection Recommendations

SCS230AE2HRC is designated as obsolete. The substitute SCS230AE2HRC11 maintains full parameter alignment, including compliance with ROHS3 and equivalent mechanical fit (TO-247-3/TO-247N), and is listed as active. Both MSL and other critical certifications are equivalent or improved. The status of REACH compliance varies; selection should verify specific project requirements with regard to REACH status.

Frequently Asked Questions (FAQ)

Q: What determines if SCS230AE2HRC11 can substitute SCS230AE2HRC?
A: Substitution is determined by matching key electrical (voltage, current, forward drop, reverse leakage), mechanical (package, mounting), and compliance parameters (RoHS, MSL, automotive qualification).

Q: Are SCS230AE2HRC and SCS230AE2HRC11 package-compatible?
A: Both use a TO-247-3 package or variant, providing mechanical compatibility for through-hole designs.

Q: Is there any difference in speed or reverse recovery behavior between these two parts?
A: Both parts are SiC Schottky types with no reverse recovery time specified above 500mA (Io).

Q: How does the change in REACH status affect part selection?
A: The REACH status differs: the obsolete part is REACH affected, while the substitute SCS230AE2HRC11 is REACH unaffected. This parameter should be aligned with project and regulatory requirements.

Q: Can SCS230AE2HRC11 be used in all applications of SCS230AE2HRC?
A: Based on the provided electrical, mechanical, and compliance parameters, SCS230AE2HRC11 meets all key criteria for direct substitution.

Q: Does the active status of SCS230AE2HRC11 impact its suitability?
A: Yes. As SCS230AE2HRC is obsolete and SCS230AE2HRC11 is active, SCS230AE2HRC11 is preferred for ongoing support and availability.