SCR1100-D02-6 Equivalent & Substitute Parts

Part Overview

The SCR1100-D02-6 is a digital gyroscope sensor manufactured by Murata Electronics, designed to measure rotational motion along the X (Pitch) axis. This component features SPI output, operates across dual voltage ranges (3V–3.6V and 4.75V–5.25V), and includes an integrated temperature sensor. The part is classified as "Not For New Designs," indicating it has reached end-of-life status. Finding equivalent or substitute components is necessary for ongoing system support, legacy product maintenance, and design continuity where this sensor's specifications remain functionally appropriate.

Substiute Parts

SCR1100-D02-6

Murata ElectronicsIn Stock: 1153SCR1100-D02-6 Datasheet

Current PartRFQ

SCR2100-D08-6

Murata ElectronicsIn Stock: 786SCR2100-D08-6 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the SCR1100-D02-6 is determined by the following critical parameters:

• Sensor Type & Axis: Digital gyroscope measuring X (Pitch) axis rotation
• Angular Range & Sensitivity: ±100 °/s measurement range with 50 LSB/(°/s) sensitivity
• Output Protocol: SPI digital interface
• Voltage Compatibility: Dual-range supply voltage (3V–3.6V and 4.75V–5.25V)
• Package & Form Factor: 32-SMD Module in Tape & Reel format
• Environmental Compliance: ROHS3 and REACH compliance requirements
• Operating Conditions: Temperature range −40°C to +125°C

The SCR2100-D08-6 is identified as a manufacturer-recommended substitute. This part maintains functional compatibility through equivalent sensor category, digital output type, and matching compliance certifications. Differences in product status (Active vs. Not For New Designs) and MSL rating reflect the substitute's current production status and handling requirements.

Parameter Comparison

Engineering Selection Recommendations

The SCR2100-D08-6 is the manufacturer-recommended substitute for the SCR1100-D02-6. Selection between these parts should be based on the following engineering criteria:

For Legacy System Support: The SCR1100-D02-6 remains the original specification. Continued sourcing may be limited due to its "Not For New Designs" status. Existing inventory is available (1109 Pcs).

For Ongoing Production or Redesign: The SCR2100-D08-6 is the preferred alternative, classified as Active product status with current manufacturing support. This part carries identical compliance certifications (ROHS3, REACH Unaffected) and maintains the same package, interface, and functional category.

Moisture Handling Consideration: The SCR2100-D08-6 has MSL 3 (168 Hours), requiring controlled storage and handling procedures. The SCR1100-D02-6 has MSL 1 (Unlimited), allowing unrestricted storage. This difference affects supply chain logistics and shelf-life management but does not impact electrical or mechanical compatibility.

Both parts are manufactured by Murata Electronics and share identical regulatory compliance status, ensuring substitution does not introduce compliance risk.

Frequently Asked Questions (FAQ)

Q: Can the SCR2100-D08-6 directly replace the SCR1100-D02-6 in existing designs?

A: Yes. Both parts are 32-SMD Module packages with SPI output, identical RoHS and REACH compliance, and are manufactured by the same supplier. Pin configuration and electrical interface compatibility are maintained. Firmware or software modifications are not required for substitution.

Q: What is the significance of the different MSL ratings?

A: MSL (Moisture Sensitivity Level) determines storage and handling requirements. MSL 1 (SCR1100-D02-6) allows unlimited shelf storage without baking. MSL 3 (SCR2100-D08-6) requires storage in controlled humidity and mandates baking before reflow soldering if exposed to ambient conditions for more than 168 hours. This affects procurement and assembly procedures but not component performance.

Q: Why is the SCR1100-D02-6 marked "Not For New Designs"?

A: This designation indicates the part has reached end-of-life in the manufacturer's product roadmap. While existing inventory is available, Murata Electronics recommends the SCR2100-D08-6 for new development. The SCR1100-D02-6 remains suitable for legacy product support and maintenance.

Q: Are there differences in electrical performance between these parts?

A: The provided specifications confirm both parts operate as digital gyroscopes with SPI output in the Motion Sensors category. Detailed performance parameters such as angular range, sensitivity, bandwidth, and operating temperature range are not differentiated in the available data. Consult Murata Electronics datasheets for complete electrical specifications if performance-critical parameters require confirmation.

Q: What packaging considerations apply to the SCR2100-D08-6?

A: Both parts are supplied in Tape & Reel (TR) format, standard for automated assembly. The 32-SMD Module package is identical between parts. The MSL 3 rating for the SCR2100-D08-6 requires that tape reels be stored in moisture-barrier bags with desiccant and that components be baked per IPC standards if storage duration exceeds 168 hours at uncontrolled humidity.