SC62CB-150 Equivalent & Substitute Parts

Part Overview

The SC62CB-150 is a 15 µH shielded surface mount inductor manufactured by Signal Transformer, rated for 1.46 A continuous current with a maximum DC resistance of 120mOhm. This component is classified as Active product status and is RoHS3 compliant. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained within the allowed parameter tolerances for this inductor category.

Substiute Parts

SC62CB-150

Signal TransformerIn Stock: 988SC62CB-150 Datasheet

Current PartRFQ

B82472G4153M000

EPCOS - TDK ElectronicsIn Stock: 1859B82472G4153M000 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the SC62CB-150 is determined by strict equivalence in the following electrical parameters: inductance value (15 µH ±20%), current rating (minimum 1.46 A), DC resistance (120mOhm maximum), and shielding requirement (shielded). Mechanical compatibility is verified through surface mount packaging and nonstandard case dimensions. The substitute part B82472G4153M000 meets all electrical requirements and maintains RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1).

Parameter Comparison

Engineering Selection Recommendations

The B82472G4153M000 is a qualified substitute for the SC62CB-150 based on electrical parameter equivalence and regulatory compliance. Both components are Active product status and ROHS3 compliant. The substitute part demonstrates superior saturation current performance (1.1 A versus 870 mA) and extended low-temperature operating range (-55°C versus -40°C minimum), providing additional design margin in thermal and current stress conditions. Physical dimensions differ slightly (7.30mm x 7.30mm x 4.60mm for substitute versus 6.30mm x 6.20mm x 2.50mm for main part); PCB layout verification is required to confirm mechanical fit within the application.

Frequently Asked Questions (FAQ)

Q: What electrical parameters must match for SC62CB-150 substitution? A: The substitute must maintain 15 µH inductance (±20% tolerance), support minimum 1.46 A continuous current, provide maximum 120mOhm DC resistance, and include shielding. Inductance test frequency of 100 kHz applies to both parts.

Q: Is the B82472G4153M000 a direct mechanical replacement? A: No. While both are surface mount nonstandard packages, the substitute is larger (7.30mm x 7.30mm x 4.60mm versus 6.30mm x 6.20mm x 2.50mm). PCB footprint and clearance must be verified before implementation.

Q: Are there temperature range differences between these parts? A: Yes. The B82472G4153M000 operates from -55°C to 125°C, while the SC62CB-150 operates from -40°C to 125°C. The substitute provides extended low-temperature capability.

Q: Do both parts meet the same compliance standards? A: Yes. Both SC62CB-150 and B82472G4153M000 are ROHS3 compliant, REACH unaffected, and carry MSL 1 (unlimited) moisture sensitivity rating.

Q: What is the saturation current difference? A: SC62CB-150 saturates at 870 mA; B82472G4153M000 saturates at 1.1 A. The substitute provides higher saturation margin for transient current conditions.