SC16IS762IPW-T Equivalent & Substitute Parts

Part Overview

The SC16IS762IPW-T is a dual UART interface controller manufactured by NXP USA Inc., designed for RS232 and RS485 communication protocols with I2C and SPI interface support. This component operates in the 28-TSSOP package format and is classified as Obsolete. Due to its obsolete status, identifying equivalent and substitute parts is essential for system redesign, production continuity, and long-term component availability assurance.

Substiute Parts

SC16IS762IPW-T

NXP USA Inc.In Stock: 1047SC16IS762IPW-T Datasheet

Current PartRFQ

SC16IS752IPW,128

NXP USA Inc.In Stock: 2206SC16IS752IPW,128 Datasheet

Parametric EquivalentRFQ

SC16IS762IPW,128

NXP USA Inc.In Stock: 1077SC16IS762IPW,128 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SC16IS762IPW-T are identified based on strict electrical and mechanical parameter alignment. The following criteria determine substitution eligibility:

Key Substitution Parameters:

• Protocol support: RS232, RS485
• Interface types: I2C, SPI, UART
• Supply voltage range: 2.5V, 3.3V
• Supply current: 2mA
• Operating temperature range: -40°C ~ 95°C
• Package format: 28-TSSOP (0.173", 4.40mm Width)
• Compliance standards: ROHS3 Compliant, REACH Unaffected

The SC16IS762IPW-T has two identified substitutes: SC16IS762IPW,128 and SC16IS752IPW,128. Both parts maintain identical electrical specifications and package requirements. The primary distinction lies in product status and packaging format, with SC16IS762IPW,128 remaining in active production status and SC16IS752IPW,128 offering an alternative dual UART configuration.

Parameter Comparison

Engineering Selection Recommendations

SC16IS762IPW,128 (Primary Substitute)

This part is the direct equivalent to SC16IS762IPW-T with identical electrical and mechanical specifications. The primary advantage is its Active product status, ensuring long-term availability and supply chain continuity. The Tape & Reel packaging format supports high-volume production environments. This substitute is suitable for direct replacement in new designs and production continuity scenarios.

SC16IS752IPW,128 (Alternative Substitute)

This part maintains all critical electrical parameters and package specifications required for functional equivalence. It is also in Active product status. The Cut Tape and Digi-Reel packaging options provide flexibility for different procurement and assembly workflows. This substitute is suitable when alternative packaging formats are preferred or when supply constraints affect primary substitute availability.

Both substitutes are ROHS3 Compliant and REACH Unaffected, meeting regulatory requirements equivalent to the original part.

Frequently Asked Questions (FAQ)

Q: Can SC16IS762IPW,128 be used as a direct replacement for SC16IS762IPW-T?

A: Yes. Both parts share identical electrical specifications (RS232/RS485 protocols, I2C/SPI/UART interfaces, 2.5V–3.3V supply voltage, 2mA supply current, -40°C to 95°C operating temperature) and the same 28-TSSOP package format. The primary difference is product status: SC16IS762IPW,128 is Active, while SC16IS762IPW-T is Obsolete.

Q: What is the difference between SC16IS762IPW,128 and SC16IS752IPW,128?

A: Both parts are functionally equivalent based on provided specifications. The difference lies in packaging format: SC16IS762IPW,128 is supplied in Tape & Reel format, while SC16IS752IPW,128 is available in Cut Tape and Digi-Reel formats. Electrical and mechanical parameters are identical.

Q: Are there any compliance or regulatory differences between the main part and substitutes?

A: No. All three parts are ROHS3 Compliant and REACH Unaffected, meeting identical regulatory standards.

Q: Which substitute should be selected for new production designs?

A: SC16IS762IPW,128 is recommended for new designs due to its Active product status and Tape & Reel packaging, which is standard for automated assembly processes. SC16IS752IPW,128 is a valid alternative if specific packaging requirements or supply availability necessitate its use.

Q: Is the 28-TSSOP package format identical across all three parts?

A: Yes. All parts use the 28-TSSOP package with 0.173" width and 4.40mm dimensions, ensuring mechanical and electrical compatibility on existing PCB layouts.