SC16IS762IPW,128 Equivalent & Substitute Parts

Part Overview

The SC16IS762IPW,128 is a dual UART interface controller manufactured by NXP USA Inc., designed for RS232 and RS485 communication protocols. This active product integrates I2C, SPI, and UART interfaces in a 28-TSSOP package, supporting supply voltages of 2.5V and 3.3V with a maximum supply current of 2mA. The device operates across the industrial temperature range of -40°C to 95°C and is ROHS3 compliant. Equivalent substitute parts are identified based on matching electrical specifications, interface protocols, package configuration, and compliance certifications.

Substiute Parts

SC16IS762IPW,128

NXP USA Inc.In Stock: 1077SC16IS762IPW,128 Datasheet

Current PartRFQ

SC16IS752IPW,128

NXP USA Inc.In Stock: 2206SC16IS752IPW,128 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the SC16IS762IPW,128 is determined by the following critical parameters:

• Protocol Support: Both main and substitute parts must support RS232 and RS485 protocols
• Interface Configuration: I2C, SPI, and UART interface availability must be identical
• Package Type: 28-TSSOP package with matching physical dimensions (0.173", 4.40mm Width)
• Electrical Specifications: Supply voltage range (2.5V, 3.3V) and supply current (2mA) must be equivalent
• Operating Temperature Range: -40°C to 95°C operational capability required
• Compliance Standards: ROHS3 compliance and MSL Level 1 rating must be maintained
• Functional Equivalence: Dual UART with 64-byte buffer capacity

The SC16IS752IPW,128 meets all substitution criteria as a parametric equivalent, differing only in packaging format (Cut Tape & Digi-Reel® versus Tape & Reel).

Parameter Comparison

Engineering Selection Recommendations

Both the SC16IS762IPW,128 and SC16IS752IPW,128 are active products from NXP USA Inc. with identical electrical and functional specifications. Selection between these parts should be based on packaging and inventory requirements:

• SC16IS762IPW,128: Available in Tape & Reel (TR) format with 979 pieces in stock. Suitable for high-volume automated assembly processes.
• SC16IS752IPW,128: Available in Cut Tape (CT) & Digi-Reel® format with 2100 pieces in stock. Suitable for lower-volume applications or mixed component sourcing.

Both parts maintain ROHS3 compliance and REACH unaffected status, meeting environmental and regulatory requirements. The identical electrical specifications, interface protocols, and operating parameters ensure direct functional interchangeability in circuit design applications.

Frequently Asked Questions (FAQ)

Q: Can SC16IS752IPW,128 be used as a direct replacement for SC16IS762IPW,128?

A: Yes. Both parts are parametric equivalents with identical electrical specifications, interface protocols (RS232, RS485), and package dimensions (28-TSSOP). The only difference is packaging format (Tape & Reel versus Cut Tape & Digi-Reel®).

Q: Are there any differences in the dual UART functionality between these parts?

A: No. Both parts provide identical dual UART functionality with 64-byte buffer capacity, I2C, SPI, and UART interface support, and operate across the same temperature range (-40°C to 95°C).

Q: What supply voltage options are available for these parts?

A: Both SC16IS762IPW,128 and SC16IS752IPW,128 support supply voltages of 2.5V and 3.3V with a maximum supply current of 2mA.

Q: Do both parts meet the same compliance standards?

A: Yes. Both parts are ROHS3 compliant, REACH unaffected, and carry MSL Level 1 (Unlimited) moisture sensitivity rating.

Q: Which packaging format should I select for my application?

A: Selection depends on assembly requirements. Tape & Reel (TR) format is optimized for high-volume automated pick-and-place assembly. Cut Tape (CT) & Digi-Reel® format is suitable for lower-volume applications or when mixed component sourcing is required.