SC16IS752IPW-T Equivalent & Substitute Parts

Part Overview

The SC16IS752IPW-T is a dual UART interface controller manufactured by NXP USA Inc., designed for RS232 and RS485 communication protocols with I2C and SPI interface support. This component operates in the 28-TSSOP package and is classified as obsolete. Due to its obsolete status, identifying equivalent and substitute parts is essential for ongoing system maintenance, design updates, and procurement continuity.

Substiute Parts

SC16IS752IPW-T

NXP USA Inc.In Stock: 769SC16IS752IPW-T Datasheet

Current PartRFQ

SC16IS752IPW,128

NXP USA Inc.In Stock: 2206SC16IS752IPW,128 Datasheet

Parametric EquivalentRFQ

SC16IS762IPW,128

NXP USA Inc.In Stock: 1077SC16IS762IPW,128 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SC16IS752IPW-T are identified based on strict electrical and mechanical parameter alignment. The following criteria determine substitution eligibility:

Key Substitution Parameters:

• Protocol support: RS232, RS485
• Interface types: I2C, SPI, UART
• Supply voltage range: 2.5V, 3.3V
• Supply current: 2mA
• Operating temperature range: -40°C ~ 95°C
• Package type: 28-TSSOP
• Physical dimensions: 0.173", 4.40mm Width
• Compliance standards: ROHS3, REACH Unaffected

The SC16IS752IPW-T has two identified substitutes: SC16IS752IPW,128 and SC16IS762IPW,128. Both parts maintain identical electrical specifications and package requirements. The primary distinction between these substitutes is product status and packaging format.

Parameter Comparison

Engineering Selection Recommendations

Both SC16IS752IPW,128 and SC16IS762IPW,128 are suitable substitutes for the obsolete SC16IS752IPW-T based on complete electrical and mechanical parameter equivalence. The selection between these two substitutes should be determined by packaging and procurement requirements:

SC16IS752IPW,128: This part maintains active product status and is available in Cut Tape (CT) and Digi-Reel® packaging formats. Current inventory is 2100 pieces.

SC16IS762IPW,128: This part also maintains active product status and is supplied in Tape & Reel (TR) format. Current inventory is 979 pieces.

Both substitutes comply with ROHS3 and REACH standards, matching the compliance profile of the original part. The choice between these substitutes depends on your procurement workflow and packaging compatibility with existing assembly processes.

Frequently Asked Questions (FAQ)

Q: Can SC16IS752IPW,128 and SC16IS762IPW,128 be used interchangeably with SC16IS752IPW-T?

A: Yes. Both substitutes maintain identical electrical specifications, including protocol support (RS232, RS485), interface types (I2C, SPI, UART), supply voltage (2.5V, 3.3V), current consumption (2mA), operating temperature range (-40°C ~ 95°C), and physical package dimensions (28-TSSOP, 0.173", 4.40mm Width).

Q: What is the primary difference between the two substitute parts?

A: The substitutes differ in product status and packaging format. SC16IS752IPW,128 is supplied in Cut Tape (CT) and Digi-Reel® formats, while SC16IS762IPW,128 is supplied in Tape & Reel (TR) format. Both maintain active product status, unlike the obsolete main part.

Q: Are there any compliance or certification differences between the main part and substitutes?

A: No. All three parts share identical compliance certifications: ROHS3 Compliant, REACH Unaffected, and Moisture Sensitivity Level 1 (Unlimited).

Q: Which substitute should I select for new designs?

A: Either substitute is suitable for new designs. Selection should be based on your assembly process requirements. Choose SC16IS752IPW,128 if your process uses Cut Tape or Digi-Reel® packaging, or SC16IS762IPW,128 if your process uses Tape & Reel format.

Q: Are the package dimensions identical across all three parts?

A: Yes. All three parts use the 28-TSSOP package with identical physical dimensions of 0.173" width and 4.40mm height, ensuring direct mechanical compatibility.