SC-06-101 Common Mode Choke Equivalent & Substitute Parts

Part Overview

The SC-06-101 is a 1 mH @ 100 kHz, 2-line common mode choke manufactured by KEMET, designed for power line filtering applications. This through-hole component is rated for 6A maximum current with 27mOhm DC resistance and operates across -40°C to 120°C. The part is currently active in production with ROHS3 compliance and REACH unaffected status. Substitute parts may be required due to inventory constraints, design optimization needs, or application-specific inductance requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

SC-06-101

KEMETIn Stock: 1010SC-06-101 Datasheet

Current PartRFQ

SC-06-E200H

KEMETIn Stock: 1428SC-06-E200H Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SC-06-101 is determined by the following critical parameters:

• Mechanical Compatibility: Mounting type (through hole), package configuration (horizontal, no base, 4 PC pin), physical dimensions (0.984" diameter, 0.748" maximum height), and series designation (SC) must remain identical
• Electrical Ratings: Current rating (6A maximum), voltage ratings (250V DC/AC), and DC resistance (27mOhm maximum) establish the baseline electrical envelope
• Operating Environment: Temperature range (-40°C to 120°C) and compliance certifications (ROHS3, REACH unaffected) must be maintained
• Functional Parameters: Number of lines (2-line configuration) and filter type (power line) define the functional category

The SC-06-E200H qualifies as a parametric equivalent because it maintains identical mechanical form factor, current rating, voltage ratings, DC resistance, temperature range, and all compliance certifications. The inductance value differs (2 mH @ 10 kHz versus 1 mH @ 100 kHz), which represents a design variation within the same product family rather than a functional incompatibility.

Parameter Comparison

Engineering Selection Recommendations

Both SC-06-101 and SC-06-E200H are active production components with identical ROHS3 compliance and REACH unaffected status. Selection between these parts depends on the specific inductance requirement of the application circuit. The SC-06-101 provides 1 mH @ 100 kHz, while the SC-06-E200H provides 2 mH @ 10 kHz. Both parts share identical mechanical footprints, electrical ratings, and environmental specifications, enabling direct substitution at the board level when inductance values are compatible with circuit design parameters.

Frequently Asked Questions (FAQ)

Q: Can SC-06-E200H replace SC-06-101 in any application?

A: Both parts share identical mechanical form factors, current ratings (6A), voltage ratings (250V DC/AC), DC resistance (27mOhm), and operating temperature ranges (-40°C to 120°C). Substitution is mechanically and electrically feasible. However, the inductance values differ (1 mH @ 100 kHz versus 2 mH @ 10 kHz), so circuit-level compatibility must be verified based on the specific filtering requirements of your application.

Q: Are the physical dimensions identical between these parts?

A: Yes. Both SC-06-101 and SC-06-E200H have identical dimensions: 0.984" diameter (25.00mm) and 0.748" maximum height (19.00mm). Both use horizontal, no-base, 4-pin configurations suitable for through-hole mounting.

Q: Do both parts meet the same compliance standards?

A: Yes. Both SC-06-101 and SC-06-E200H are ROHS3 compliant and REACH unaffected, with identical voltage ratings (250V DC/AC) and operating temperature ranges (-40°C to 120°C).

Q: What is the primary difference between these substitute parts?

A: The inductance specification differs. SC-06-101 is rated at 1 mH @ 100 kHz, while SC-06-E200H is rated at 2 mH @ 10 kHz. This difference reflects measurement at different frequencies and represents a 2:1 inductance ratio. Circuit design parameters determine which inductance value is appropriate for your application.

Q: Are both parts from the same manufacturer?

A: Yes. Both SC-06-101 and SC-06-E200H are manufactured by KEMET and belong to the SC series of common mode chokes for power line filtering.