SBR200-10JS Equivalent & Substitute Parts

Part Overview

The SBR200-10JS is a Schottky diode array manufactured by onsemi, configured as 1 pair common cathode with 100 V reverse voltage rating and 20 A average rectified current per diode. This component is packaged in TO-220-3 Full Pack through-hole configuration and is classified as obsolete product status. Due to its obsolete classification, equivalent substitute parts from active product lines are necessary for new designs and ongoing production requirements.

Substiute Parts

SBR200-10JS

onsemiIn Stock: 1202SBR200-10JS Datasheet

Current PartRFQ

MBR41H100CTG

onsemiIn Stock: 3922MBR41H100CTG Datasheet

SimilarRFQ

MBRF20H100CT-E3/45

Vishay General Semiconductor - Diodes DivisionIn Stock: 1418MBRF20H100CT-E3/45 Datasheet

SimilarRFQ

STPS20H100CFP

STMicroelectronicsIn Stock: 105150STPS20H100CFP Datasheet

SimilarRFQ

STPS20S100CFP

STMicroelectronicsIn Stock: 17331STPS20S100CFP Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the SBR200-10JS is determined by the following critical parameters:

Mandatory Matching Parameters:

• Diode Configuration: 1 Pair Common Cathode
• Technology: Schottky
• Voltage - DC Reverse (Vr) (Max): 100 V
• Mounting Type: Through Hole
• Package / Case: TO-220-3 configuration

Current Rating Consideration: The SBR200-10JS specifies 20 A average rectified current per diode. Substitute parts with 10 A ratings (MBRF20H100CT-E3/45, STPS20H100CFP, STPS20S100CFP) operate at reduced current capacity and are suitable only for applications where the actual operating current does not exceed 10 A. The MBR41H100CTG maintains the 20 A rating and represents a direct current-equivalent substitute.

Electrical Performance Parameters: Forward voltage (Vf), reverse leakage current, and operating temperature range vary among substitutes. These variations are acceptable within the scope of Schottky diode array substitution provided the application requirements do not mandate specific performance thresholds.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute - Current-Equivalent Selection: The MBR41H100CTG is the recommended substitute when the application requires the full 20 A current rating of the original SBR200-10JS. This part maintains identical current specifications, operates at 100 V reverse voltage, and is classified as active product status with ROHS3 compliance. The MBR41H100CTG is manufactured by onsemi, the same manufacturer as the original part, ensuring design continuity.

Alternative Substitutes - Reduced Current Applications: The MBRF20H100CT-E3/45, STPS20H100CFP, and STPS20S100CFP are suitable substitutes for applications where the actual operating current does not exceed 10 A. All three parts are active product status with ROHS3 compliance. The MBRF20H100CT-E3/45 features an isolated tab package variant (ITO-220AB) and extended operating temperature range (-65°C ~ 175°C). The STPS20H100CFP and STPS20S100CFP are manufactured by STMicroelectronics and differ in forward voltage characteristics (770 mV and 850 mV respectively at 10 A).

Compliance Considerations: All substitute parts are REACH Unaffected and classified under ECCN EAR99 and HTSUS 8541.10.0080, matching the original part's regulatory classification. Substitute parts with active product status ensure long-term availability and supply chain stability compared to the obsolete SBR200-10JS.

Frequently Asked Questions (FAQ)

Q: Can the MBR41H100CTG directly replace the SBR200-10JS in all applications? A: The MBR41H100CTG is electrically compatible as a direct substitute. Both parts share identical diode configuration (1 pair common cathode), reverse voltage rating (100 V), current rating (20 A), and fast recovery Schottky technology. The primary difference is product status: MBR41H100CTG is active while SBR200-10JS is obsolete. Mechanical mounting is compatible in TO-220-3 through-hole applications.

Q: What is the difference between the 20 A and 10 A rated substitutes? A: The SBR200-10JS and MBR41H100CTG are rated for 20 A average rectified current per diode. The MBRF20H100CT-E3/45, STPS20H100CFP, and STPS20S100CFP are rated for 10 A. Selection between these groups depends on the actual operating current in the application. If the circuit operates at currents exceeding 10 A, only the 20 A rated parts (SBR200-10JS or MBR41H100CTG) are suitable.

Q: Are there package differences between the substitute parts? A: The SBR200-10JS, MBR41H100CTG, STPS20H100CFP, and STPS20S100CFP use standard TO-220-3 Full Pack packaging. The MBRF20H100CT-E3/45 uses TO-220-3 Full Pack with an isolated tab variant (ITO-220AB). The isolated tab configuration provides electrical isolation between the tab and the diode cathode, which may be required in specific circuit designs. Standard TO-220-3 packages are not isolated.

Q: How do forward voltage specifications affect substitution? A: Forward voltage (Vf) varies among substitutes: SBR200-10JS specifies 880 mV @ 10 A, while alternatives range from 770 mV to 850 mV @ 10 A. These variations are typical within Schottky diode technology and do not prevent substitution. Forward voltage affects power dissipation and heat generation; lower Vf values result in reduced power loss. Applications sensitive to forward voltage drop should evaluate the specific substitute's datasheet.

Q: What is the significance of reverse leakage current differences? A: Reverse leakage current varies from 1 mA (SBR200-10JS) to 3.5 µA (STPS20S100CFP) at 100 V. Lower leakage current indicates better reverse blocking characteristics and reduced standby power consumption. The SBR200-10JS exhibits higher leakage, which is typical for older Schottky technology. Substitute parts with lower leakage (10 µA, 4.5 µA, or 3.5 µA) provide improved efficiency in applications where reverse leakage contributes significantly to total power consumption.

Q: Are all substitute parts RoHS compliant? A: All substitute parts (MBR41H100CTG, MBRF20H100CT-E3/45, STPS20H100CFP, STPS20S100CFP) are ROHS3 compliant. The original SBR200-10JS does not specify RoHS status. For applications requiring RoHS compliance, any of the four substitute parts satisfy regulatory requirements.

Q: What is the operating temperature range consideration for substitution? A: The SBR200-10JS operates from -55°C to 150°C junction temperature. Substitute parts operate to 175°C maximum (MBR41H100CTG, STPS20H100CFP, STPS20S100CFP) or -65°C to 175°C (MBRF20H100CT-E3/45). Higher maximum operating temperatures provide design margin in high-temperature applications. The extended lower temperature range of MBRF20H100CT-E3/45 (-65°C) is beneficial for cryogenic or aerospace applications.