SBR100-16JS Equivalent & Substitute Parts

Part Overview

The SBR100-16JS is a Schottky diode array manufactured by onsemi, configured as 1 pair common cathode with a maximum reverse voltage of 160 V and average rectified current of 10 A per diode. The device is packaged in TO-220-3 Full Pack through-hole configuration. This part is classified as obsolete, making equivalent and substitute parts necessary for ongoing design support and procurement.

Substiute Parts

SBR100-16JS

onsemiIn Stock: 922SBR100-16JS Datasheet

Current PartRFQ

STPS20150CFP

STMicroelectronicsIn Stock: 102899STPS20150CFP Datasheet

SimilarRFQ

STPS20170CFP

STMicroelectronicsIn Stock: 14509STPS20170CFP Datasheet

SimilarRFQ

STPS30150CFP

STMicroelectronicsIn Stock: 2393STPS30150CFP Datasheet

SimilarRFQ

VF10150C-M3/4W

Vishay General Semiconductor - Diodes DivisionIn Stock: 1077VF10150C-M3/4W Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the SBR100-16JS is determined by the following critical parameters:

Configuration Match: All substitute parts maintain 1 pair common cathode diode array configuration and Schottky technology, ensuring functional equivalence at the circuit level.

Voltage Rating: The SBR100-16JS operates at 160 V maximum reverse voltage. Substitute parts are grouped into two voltage categories:

• 150 V rated parts (STPS20150CFP, STPS30150CFP, VF10150C-M3/4W): Suitable for applications where the 160 V rating is not a limiting requirement
• 170 V rated parts (STPS20170CFP): Suitable for applications requiring voltage margin above the 160 V specification

Current Rating: The SBR100-16JS is rated at 10 A average rectified current per diode. Substitute parts are available at:

• 5 A rated parts (VF10150C-M3/4W): For reduced current applications
• 10 A rated parts (STPS20150CFP, STPS20170CFP): Direct current equivalents
• 15 A rated parts (STPS30150CFP): For increased current capacity

Package Compatibility: All substitute parts use TO-220-3 Full Pack through-hole mounting, maintaining mechanical and thermal interface compatibility with the original design.

Speed Characteristics: All substitute parts maintain fast recovery characteristics (≤ 500 ns, > 200 mA), preserving switching performance.

Parameter Comparison

Engineering Selection Recommendations

STPS20150CFP is an active product from STMicroelectronics with ROHS3 compliance. This part matches the 10 A current rating and provides 150 V reverse voltage rating. The 10 V reduction from the original 160 V specification is acceptable for applications where the circuit design margin accommodates this difference. This part offers improved availability compared to the obsolete SBR100-16JS.

STPS20170CFP is an active product from STMicroelectronics with ROHS3 compliance. This part matches the 10 A current rating and provides 170 V reverse voltage rating, exceeding the original 160 V specification. This part is suitable for designs requiring voltage margin above the original specification and offers the highest voltage rating among available substitutes.

STPS30150CFP is an active product from STMicroelectronics with ROHS3 compliance. This part provides 150 V reverse voltage rating with increased current capacity of 15 A per diode. This part is suitable for applications requiring higher current handling than the original 10 A specification while maintaining the same voltage class.

VF10150C-M3/4W is an active product from Vishay General Semiconductor - Diodes Division with ROHS3 compliance. This part provides 150 V reverse voltage rating with reduced current capacity of 5 A per diode. The isolated tab package variant (ITO-220AB) differs from the standard TO-220-3 Full Pack. This part is suitable for reduced current applications where the isolated tab feature provides thermal or electrical isolation benefits. Operating temperature range matches the original part (-55°C ~ 150°C).

All substitute parts maintain REACH Unaffected status and EAR99 ECCN classification, consistent with the original part.

Frequently Asked Questions (FAQ)

Q: Can STPS20150CFP directly replace SBR100-16JS in all applications?

A: STPS20150CFP is functionally equivalent for applications where the 150 V reverse voltage rating is sufficient. The 10 V reduction from the original 160 V specification must be evaluated against circuit design margins. Current rating (10 A) and package (TO-220-3 Full Pack) are identical. STPS20150CFP is an active product with ROHS3 compliance, offering superior availability.

Q: What is the difference between STPS20170CFP and STPS20150CFP?

A: Both parts are manufactured by STMicroelectronics with identical 10 A current ratings and TO-220-3 Full Pack packaging. STPS20170CFP provides 170 V reverse voltage rating compared to 150 V for STPS20150CFP. STPS20170CFP is suitable for applications requiring higher voltage margin or operating in higher voltage circuits.

Q: When should STPS30150CFP be selected instead of STPS20150CFP?

A: STPS30150CFP provides 15 A average rectified current per diode compared to 10 A for STPS20150CFP. Both parts share 150 V reverse voltage rating and TO-220-3 Full Pack packaging. STPS30150CFP is selected for applications requiring higher current capacity than the original 10 A specification.

Q: Is VF10150C-M3/4W compatible with the original SBR100-16JS mounting?

A: VF10150C-M3/4W uses TO-220-3 Full Pack with isolated tab (ITO-220AB) configuration, compared to standard TO-220-3 Full Pack for SBR100-16JS. The isolated tab feature provides electrical isolation of the mounting tab from the diode cathode. This part is mechanically compatible with TO-220 mounting but requires verification that the isolated tab feature does not conflict with circuit board design or thermal management requirements.

Q: What is the impact of forward voltage differences between substitute parts?

A: Forward voltage varies across substitute parts: SBR100-16JS (800 mV @ 5 A), STPS20150CFP (920 mV @ 10 A), STPS20170CFP (900 mV @ 10 A), STPS30150CFP (920 mV @ 15 A), and VF10150C-M3/4W (1.41 V @ 5 A). Forward voltage differences affect power dissipation and thermal performance. Circuit designs with tight thermal budgets or high-frequency switching must account for these variations.

Q: Are all substitute parts RoHS compliant?

A: STPS20150CFP, STPS20170CFP, STPS30150CFP, and VF10150C-M3/4W are all ROHS3 compliant. The original SBR100-16JS RoHS status is not specified. All substitute parts maintain REACH Unaffected status.

Q: What is the maximum junction temperature for each substitute part?

A: STPS20150CFP, STPS20170CFP, and STPS30150CFP specify 175°C maximum junction temperature. VF10150C-M3/4W and the original SBR100-16JS specify -55°C to 150°C operating temperature range. Designs operating near maximum temperature limits must account for these differences.

Q: Can reverse leakage current differences affect circuit performance?

A: Reverse leakage current varies significantly across parts: SBR100-16JS (100 µA @ 160 V), STPS20150CFP (5 µA @ 150 V), STPS20170CFP (15 µA @ 170 V), STPS30150CFP (6.5 µA @ 150 V), and VF10150C-M3/4W (100 µA @ 150 V). Applications sensitive to leakage current, such as precision analog circuits or high-impedance circuits, must evaluate these differences.