SBE807-TL-E Equivalent & Substitute Parts

Part Overview

The SBE807-TL-E is a Schottky diode array manufactured by onsemi, configured as 2 independent diodes rated for 30 V DC reverse voltage and 1 A average rectified current per diode. The device is housed in a surface mount SC-74A (SOT-753) package with a 5-CPH supplier device package designation.

The SBE807-TL-E carries an Obsolete product status. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production requirements for applications utilizing this diode array configuration.

Key Parameters

Parameter	Value
Diode Configuration	2 Independent
Technology	Schottky
Voltage - DC Reverse (Vr) (Max)	30 V
Current - Average Rectified (Io) (per Diode)	1 A
Voltage - Forward (Vf) (Max) @ If	530 mV @ 1 A
Reverse Recovery Time (trr)	10 ns
Current - Reverse Leakage @ Vr	15 µA @ 16 V
Operating Temperature - Junction	-55°C ~ 125°C
Mounting Type	Surface Mount
Package / Case	SC-74A, SOT-753
Supplier Device Package	5-CPH
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the SBE807-TL-E is determined by electrical and mechanical parameter equivalence across the following criteria:

Electrical Parameters:

Diode configuration (2 Independent)
Schottky technology classification
Maximum DC reverse voltage (30 V)
Average rectified current per diode (1 A)
Forward voltage drop (530 mV @ 1 A)
Reverse recovery time (10 ns)
Reverse leakage current (15 µA @ 16 V)
Junction temperature range (-55°C ~ 125°C)

Mechanical Parameters:

Surface mount mounting type
SC-74A / SOT-753 package form factor
5-CPH supplier device package designation

Parts meeting all these parameters are classified as direct electrical and mechanical equivalents. The SBE807-TL-W satisfies all specified parameters and is therefore a valid substitute for the obsolete SBE807-TL-E.

Parameter Comparison

Parameter	SBE807-TL-E (Main Part)	SBE807-TL-W (Substitute)
Manufacturer	onsemi	onsemi
Category	Diodes, Rectifiers	Diodes, Rectifiers
Diode Configuration	2 Independent	2 Independent
Technology	Schottky	Schottky
Voltage - DC Reverse (Vr) (Max)	30 V	30 V
Current - Average Rectified (Io) (per Diode)	1 A	1 A
Voltage - Forward (Vf) (Max) @ If	530 mV @ 1 A	530 mV @ 1 A
Speed	Fast Recovery ≤ 500ns, > 200mA (Io)	Fast Recovery ≤ 500ns, > 200mA (Io)
Reverse Recovery Time (trr)	10 ns	10 ns
Current - Reverse Leakage @ Vr	15 µA @ 16 V	15 µA @ 16 V
Operating Temperature - Junction	-55°C ~ 125°C	-55°C ~ 125°C
Mounting Type	Surface Mount	Surface Mount
Package / Case	SC-74A, SOT-753	SC-74A, SOT-753
Supplier Device Package	5-CPH	5-CPH
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)
Product Status	Obsolete	Active
Packaging	Not specified	Tape & Reel (TR)
RoHS Status	Not specified	ROHS3 Compliant

Engineering Selection Recommendations

The SBE807-TL-W is the direct substitute for the obsolete SBE807-TL-E. Both parts are manufactured by onsemi and share identical electrical and mechanical specifications across all critical parameters: diode configuration, Schottky technology, voltage ratings, current ratings, forward voltage characteristics, recovery time, leakage current, temperature range, and package form factor.

The primary distinction between the two parts is product status: the SBE807-TL-E is classified as Obsolete, while the SBE807-TL-W maintains Active status. The SBE807-TL-W is supplied in Tape & Reel (TR) packaging and carries ROHS3 compliance certification, providing enhanced regulatory alignment for new designs and ongoing production.

For applications currently utilizing the SBE807-TL-E, direct substitution with the SBE807-TL-W is supported without circuit modification or re-qualification, provided that the Tape & Reel packaging format is compatible with assembly processes.

Frequently Asked Questions (FAQ)

Q: Can the SBE807-TL-W directly replace the SBE807-TL-E in existing designs?

A: Yes. The SBE807-TL-W is electrically and mechanically equivalent to the SBE807-TL-E across all specified parameters, including voltage ratings, current ratings, forward voltage drop, recovery time, leakage current, temperature range, and package form factor. No circuit modifications are required.

Q: What is the primary reason for substitution?

A: The SBE807-TL-E is classified as Obsolete. The SBE807-TL-W is the active equivalent part from the same manufacturer, ensuring continued supply chain availability and support.

Q: Are there packaging differences between these parts?

A: The SBE807-TL-E packaging format is not specified in the provided data. The SBE807-TL-W is supplied in Tape & Reel (TR) packaging. Both parts use the same SC-74A (SOT-753) package form factor and 5-CPH supplier device package designation. Verify that Tape & Reel packaging is compatible with your assembly process.

Q: What compliance certifications apply to the substitute part?

A: The SBE807-TL-W carries ROHS3 compliance certification. Both parts are REACH Unaffected and classified under ECCN EAR99 and HTSUS 8541.10.0080.

Q: Are the electrical characteristics identical?

A: Yes. Both parts share identical specifications for DC reverse voltage (30 V), average rectified current (1 A per diode), forward voltage (530 mV @ 1 A), reverse recovery time (10 ns), reverse leakage current (15 µA @ 16 V), and operating temperature range (-55°C ~ 125°C).

Q: What is the moisture sensitivity level?

A: Both parts carry Moisture Sensitivity Level (MSL) 1, indicating Unlimited moisture sensitivity classification.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message