SBC9913F N Type Connector Plug Equivalent & Substitute Parts

Part Overview

The SBC9913F is an N Type Connector Plug with male pin configuration manufactured by Winchester Interconnect. This coaxial RF connector is designed for applications requiring threaded fastening and weatherproof ingress protection up to 12 GHz. The part is currently Active in product status with 1114 pieces in stock inventory. Equivalent and substitute parts are identified when mechanical compatibility, electrical performance within specified parameters, and connector interface standards align with the original specification.

Substiute Parts

SBC9913F

Winchester InterconnectIn Stock: 1128SBC9913F Datasheet

Current PartRFQ

82-202-1006

Amphenol RFIn Stock: 146682-202-1006 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SBC9913F is determined by the following critical parameters:

Mechanical Compatibility:

• Connector Style: N Type (threaded interface standard)
• Connector Type: Plug, Male Pin (mating interface geometry)
• Fastening Type: Threaded (mechanical coupling method)
• Shield Termination: Clamp (shielding mechanism)

Electrical Performance:

• Frequency - Max: 12 GHz or higher (operational bandwidth)
• Voltage Rating: 1000 V or higher (electrical stress rating)
• Mating Cycles: 500 or higher (mechanical durability)
• Insertion Loss: 0.2 dB or lower (signal integrity)

Environmental & Compliance:

• Ingress Protection: Weatherproof (environmental sealing)
• RoHS Status: RoHS Compliant or ROHS3 Compliant (regulatory compliance)
• Moisture Sensitivity Level: 1 (Unlimited) (handling requirements)

The substitute part 82-202-1006 meets all critical substitution criteria within these parameter boundaries.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: 82-202-1006 (Amphenol RF)

The 82-202-1006 is qualified as a direct substitute for the SBC9913F based on the following engineering criteria:

1. Mechanical Interface Compatibility: Both parts conform to N Type threaded connector standards with identical plug male pin configuration and clamp shield termination.

2. Electrical Performance: The 82-202-1006 operates at 11 GHz maximum frequency, which is within the operational envelope of the SBC9913F (12 GHz). Insertion loss of 0.15 dB is superior to the 0.2 dB specification. Voltage rating of 1500 V exceeds the 1000 V requirement.

3. Durability & Environmental: Both parts support 500 mating cycles and maintain weatherproof ingress protection for field deployment.

4. Regulatory Compliance: The 82-202-1006 carries ROHS3 Compliant certification, meeting current regulatory standards. Both parts maintain MSL 1 (Unlimited) moisture sensitivity classification.

5. Product Status: Both parts are Active in product status with confirmed inventory availability.

The 82-202-1006 is suitable for direct substitution in applications where the SBC9913F is specified, provided the cable group compatibility (Belden 9913 series) and contact termination method (solder vs. clamp) are acceptable for the end application.

Frequently Asked Questions (FAQ)

Q: Can the 82-202-1006 be used as a direct replacement for the SBC9913F?

A: Yes. Both connectors conform to N Type threaded standards with identical mechanical interfaces (plug, male pin, clamp shield termination). Electrical parameters of the 82-202-1006 meet or exceed SBC9913F specifications across frequency, voltage, and insertion loss ratings.

Q: What is the frequency difference between these parts?

A: The SBC9913F operates to 12 GHz maximum, while the 82-202-1006 operates to 11 GHz maximum. For applications operating below 11 GHz, this difference is not a limiting factor. Applications requiring operation above 11 GHz must use the SBC9913F.

Q: Are there differences in contact termination?

A: Yes. The SBC9913F uses clamp termination, while the 82-202-1006 uses solder termination. The termination method affects cable assembly procedures and field repair capabilities. Verify that solder termination is compatible with your assembly and maintenance processes.

Q: What cable types are compatible with each part?

A: The SBC9913F is specified for Belden 9913F cable. The 82-202-1006 is compatible with RG-8, 8A, 9, 9A, 9B, 87, 213, 214, 225, 302, 393, and Belden 9913 cables. The broader cable compatibility of the 82-202-1006 provides additional application flexibility.

Q: Do both parts meet current RoHS requirements?

A: Yes. The SBC9913F is RoHS Compliant. The 82-202-1006 is ROHS3 Compliant, which represents the current regulatory standard. Both parts are suitable for applications with RoHS compliance requirements.

Q: What is the voltage rating difference?

A: The SBC9913F is rated for 1000 V, while the 82-202-1006 is rated for 1500 V. The higher voltage rating of the 82-202-1006 provides additional safety margin in high-voltage applications.

Q: Are mating cycle ratings identical?

A: Yes. Both parts support 500 mating cycles, indicating equivalent mechanical durability for connector engagement and disengagement operations.

Q: What does insertion loss specification mean for these connectors?

A: Insertion loss measures signal attenuation through the connector. The SBC9913F specifies 0.2 dB maximum loss, while the 82-202-1006 specifies 0.15 dB maximum loss. Lower insertion loss indicates superior signal integrity. The 82-202-1006 provides better performance in this parameter.