SB360E-G Equivalent & Substitute Parts

Part Overview

The SB360E-G is a Schottky rectifier diode manufactured by Comchip Technology, rated for 60V DC reverse voltage and 3A average rectified current in a DO-201AD axial through-hole package. This component is classified as Active product status and is ROHS3 compliant. Equivalent and substitute parts are identified based on matching electrical ratings, mechanical compatibility, and performance characteristics within the Schottky diode rectifier category.

Substiute Parts

SB360E-G

Comchip TechnologyIn Stock: 1617SB360E-G Datasheet

Current PartRFQ

MBR360G

onsemiIn Stock: 59560MBR360G Datasheet

MFR RecommendedRFQ

MBR360RLG

onsemiIn Stock: 20404MBR360RLG Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SB360E-G are qualified based on the following criteria:

Electrical Parameter Matching:

• Voltage - DC Reverse (Vr) (Max): 60 V
• Current - Average Rectified (Io): 3 A
• Speed classification: Fast Recovery ≤ 500ns, > 200mA (Io)
• Operating Temperature - Junction: -65°C ~ 150°C
• Technology: Schottky

Mechanical Compatibility:

• Mounting Type: Through Hole
• Package / Case: Axial configuration (DO-201AD, DO-201AA, DO-27)

Compliance Requirements:

• RoHS3 Compliant
• REACH Unaffected
• ECCN: EAR99

The substitute parts MBR360G and MBR360RLG from onsemi meet all electrical and mechanical requirements. Both are manufactured Schottky rectifier diodes with identical voltage and current ratings, matching fast recovery speed specifications, and compatible axial through-hole packaging. Both maintain ROHS3 compliance and REACH unaffected status.

Parameter Comparison

Engineering Selection Recommendations

Both MBR360G and MBR360RLG are qualified substitutes for the SB360E-G based on electrical parameter equivalence and mechanical compatibility. Selection between substitute options depends on packaging requirements:

MBR360RLG is supplied in Cut Tape (CT) packaging, matching the original SB360E-G packaging format. This option is suitable for automated assembly processes and tape-reel handling.

MBR360G is supplied in Bulk packaging. This option is suitable for manual assembly or applications where tape packaging is not required.

Both substitute parts maintain Active product status and full ROHS3 compliance. Forward voltage (Vf) at rated current is 40 mV higher in the onsemi parts (740 mV vs. 700 mV @ 3 A), and reverse leakage current is 100 µA higher (600 µA vs. 500 µA @ 60 V). These differences remain within acceptable engineering tolerances for Schottky rectifier diode applications and do not affect functional equivalence for standard rectification circuits.

Frequently Asked Questions (FAQ)

Q: Can MBR360G and MBR360RLG be used interchangeably with SB360E-G?

A: Yes. Both parts meet the electrical specifications (60V, 3A, fast recovery Schottky) and mechanical requirements (through-hole, axial package). The primary difference is packaging format: MBR360RLG uses Cut Tape (CT) matching the original, while MBR360G uses Bulk packaging.

Q: What are the differences in forward voltage between the main part and substitutes?

A: The SB360E-G specifies 700 mV maximum forward voltage at 3A. Both MBR360G and MBR360RLG specify 740 mV maximum at 3A. This 40 mV difference is within normal Schottky diode manufacturing tolerances and does not affect circuit functionality in standard rectification applications.

Q: Are there differences in reverse leakage current?

A: The SB360E-G specifies 500 µA maximum reverse leakage at 60V. Both onsemi substitutes specify 600 µA maximum at 60V. This 100 µA difference is within acceptable limits for Schottky rectifier applications and does not impact performance in typical power supply circuits.

Q: Do all parts meet the same compliance standards?

A: Yes. SB360E-G, MBR360G, and MBR360RLG are all ROHS3 compliant, REACH unaffected, and classified as EAR99 for export control purposes.

Q: Which substitute should I select for my application?

A: If your assembly process uses automated tape-reel handling, select MBR360RLG (Cut Tape packaging). If your process uses bulk component handling or manual assembly, select MBR360G (Bulk packaging). Both are electrically and mechanically equivalent.

Q: Are the package designations DO-201AD, DO-201AA, and DO-27 compatible?

A: Yes. These designations refer to the same axial through-hole package form factor used for rectifier diodes. The SB360E-G uses DO-201AD, while the onsemi substitutes use DO-201AA and DO-27, which are mechanically and electrically compatible axial packages.