SAK-TC233LP-16F200F Equivalent & Substitute Parts

Part Overview

The SAK-TC233LP-16F200F is a 32-bit single-core TriCore™ microcontroller manufactured by Infineon Technologies, designed for embedded applications requiring high-performance processing and extensive connectivity options. This device integrates 1MB of FLASH program memory, 192KB of RAM, and 128KB of EEPROM, operating at 200MHz with support for CANbus, FlexRay, LINbus, and QSPI interfaces.

The SAK-TC233LP-16F200F carries an obsolete product status. Identifying equivalent and substitute parts is necessary to ensure design continuity, maintain supply chain reliability, and support long-term product availability for applications currently utilizing this microcontroller.

Substiute Parts

SAK-TC233LP-16F200F

Infineon TechnologiesIn Stock: 2026SAK-TC233LP-16F200F Datasheet

Current PartRFQ

SAK-TC233LP-16F200F AC

Infineon TechnologiesIn Stock: 300179SAK-TC233LP-16F200F AC Datasheet

SimilarRFQ

SAK-TC233LP-16F200N AC

Infineon TechnologiesIn Stock: 1191SAK-TC233LP-16F200N AC Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the SAK-TC233LP-16F200F is determined by strict equivalence across the following critical parameters:

Core Architecture & Performance:

• TriCore™ processor architecture
• 32-bit single-core configuration
• 200MHz operating frequency

Memory Configuration:

• 1MB (1M x 8) FLASH program memory
• 192K x 8 RAM
• 128K x 8 EEPROM

Connectivity & Peripherals:

• CANbus, FlexRay, LINbus, QSPI interfaces
• DMA, PWM, WDT peripherals
• A/D 24x12b SAR data converter

Physical & Environmental Specifications:

• 100-TQFP Exposed Pad package
• Surface mount mounting type
• 1.17V ~ 5.5V supply voltage range
• -40°C ~ 125°C operating temperature range
• External oscillator type

Substitute parts must maintain identical specifications across all these parameters to ensure functional and pin-level compatibility within existing designs.

Parameter Comparison

Engineering Selection Recommendations

SAK-TC233LP-16F200F AC is the primary substitute for the obsolete SAK-TC233LP-16F200F. Both parts share identical electrical and mechanical specifications, including core architecture, memory configuration, connectivity interfaces, and package form factor. The SAK-TC233LP-16F200F AC carries active product status with significantly higher inventory availability (300,100 units in stock versus 2,000 units for the original part). This part includes specified Moisture Sensitivity Level (MSL) rating of 3 (168 Hours), providing additional handling and storage guidance. Both parts maintain ROHS3 compliance and REACH unaffected status.

SAK-TC233LP-16F200N AC serves as a secondary substitute option, maintaining identical functional and physical specifications to the original part. This variant also carries active product status with lower inventory availability (1,106 units in stock). The SAK-TC233LP-16F200N AC includes the same MSL rating of 3 (168 Hours) and compliance certifications as the primary substitute.

Selection between the two active substitutes should be based on inventory requirements, supply chain lead times, and specific application handling conditions. Both parts provide direct functional replacement with no design modifications required.

Frequently Asked Questions (FAQ)

Q: Can SAK-TC233LP-16F200F AC be used as a direct replacement for SAK-TC233LP-16F200F?

A: Yes. The SAK-TC233LP-16F200F AC maintains identical electrical specifications, memory configuration, connectivity interfaces, peripheral set, and 100-TQFP package form factor. No design modifications or PCB layout changes are required for substitution.

Q: What is the difference between SAK-TC233LP-16F200F AC and SAK-TC233LP-16F200N AC?

A: Both parts share identical core specifications, memory, connectivity, and package characteristics. The primary difference is inventory availability and product sourcing. Both carry active product status and ROHS3 compliance.

Q: Why is the original SAK-TC233LP-16F200F marked as obsolete?

A: The SAK-TC233LP-16F200F has reached end-of-life status. Active substitutes with identical specifications are available to support ongoing design requirements and supply continuity.

Q: Are there any compatibility concerns when switching from SAK-TC233LP-16F200F to the substitute parts?

A: No compatibility concerns exist. The substitute parts maintain identical pin configurations, electrical characteristics, memory organization, and peripheral functionality. Existing firmware and hardware designs require no modification.

Q: What does Moisture Sensitivity Level (MSL) 3 (168 Hours) mean?

A: MSL 3 indicates the component can be exposed to moisture for up to 168 hours at 85°C and 85% relative humidity before soldering. This specification applies to the active substitute parts and should be considered during component storage and handling procedures.

Q: Are both substitute parts ROHS3 compliant?

A: Yes. Both SAK-TC233LP-16F200F AC and SAK-TC233LP-16F200N AC are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.

Q: Can I use either substitute part interchangeably in my design?

A: Yes. Both substitute parts are functionally and physically equivalent. Selection can be based on inventory availability, lead time, and supply chain considerations without affecting design performance or reliability.