SA600-2 Equivalent & Substitute Parts

Part Overview

The SA600-2 is a terminal butt splice connector manufactured by Panduit Corp, designed for inline, individual openings crimp termination applications at 600MCM (kcmil) wire gauge. This component is classified as a Pan-Lug™ series connector with gel-filled cap features and non-insulated construction in black.

The SA600-2 is discontinued at DiGi Electronics. Identifying equivalent substitute parts ensures continued availability for maintenance, repair, and new installation requirements where this connector type is specified.

Substiute Parts

SA600-2

Panduit CorpIn Stock: 1100SA600-2 Datasheet

Current PartRFQ

SA600-8

Panduit CorpIn Stock: 1119SA600-8 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the SA600-2 is determined by strict equivalence across the following critical parameters:

• Wire Gauge: 600MCM (kcmil) — must match exactly
• Terminal Type: Butt Splice, Inline, Individual Openings — must match exactly
• Number of Wire Entries: 2 — must match exactly
• Termination Method: Crimp — must match exactly
• Insulation Type: Non-Insulated — must match exactly
• Color: Black — must match exactly
• Manufacturer: Panduit Corp — maintains design and performance consistency

The SA600-8 meets all substitution criteria as an active, in-stock alternative from the same manufacturer with identical electrical and mechanical specifications.

Parameter Comparison

Engineering Selection Recommendations

The SA600-8 is the direct substitute for the SA600-2 based on complete parameter equivalence. Both components are manufactured by Panduit Corp and share identical electrical and mechanical specifications for 600MCM crimp butt splice applications.

The SA600-2 is discontinued at DiGi Electronics; however, inventory remains available. The SA600-8 is an active product with comparable stock levels, ensuring long-term availability and supply chain continuity.

Both parts comply with ROHS3 and carry identical ECCN (EAR99) and HTSUS (8536.90.4000) classifications, confirming regulatory and trade compliance equivalence.

Frequently Asked Questions (FAQ)

Q: Can SA600-8 replace SA600-2 in existing installations?

A: Yes. The SA600-8 is a direct equivalent with identical terminal type, wire gauge, number of wire entries, termination method, insulation type, and color specifications.

Q: What is the difference between SA600-2 and SA600-8?

A: Both parts are functionally equivalent. The SA600-2 is discontinued at DiGi Electronics, while SA600-8 is an active product from Panduit Corp with the same electrical and mechanical characteristics.

Q: Are there any compliance differences between these parts?

A: No. Both parts carry identical ROHS3 compliance status, ECCN classification (EAR99), and HTSUS code (8536.90.4000).

Q: What wire gauge does the SA600-2 / SA600-8 accommodate?

A: Both connectors are rated for 600MCM (kcmil) wire gauge only.

Q: Is the SA600-8 available in bulk packaging?

A: Yes. The SA600-8 is supplied in bulk packaging, matching the SA600-2 packaging format.

Q: Can these connectors be used for insulated applications?

A: No. Both SA600-2 and SA600-8 are non-insulated terminals and are not suitable for insulated wire applications.