Request Quote
(Ships tomorrow)
SA5532D Equivalent & Substitute Parts
Part Overview
The SA5532D is a general-purpose operational amplifier manufactured by Texas Instruments, configured as a dual-circuit (2-channel) device in an 8-SOIC surface-mount package. This device is classified as Last Time Buy, indicating discontinued production status. The SA5532D operates across a supply voltage range of 10V to 30V with a slew rate of 9V/µs and a gain-bandwidth product of 10 MHz, making it suitable for audio and general signal conditioning applications.
Due to its Last Time Buy status, identifying equivalent and substitute parts is necessary for design continuity and long-term component availability. Substitute parts must maintain functional compatibility while meeting the same electrical and mechanical specifications.
Substiute Parts
Key Parameters
| Parameter | SA5532D Value | Unit |
|---|---|---|
| Amplifier Type | General Purpose | — |
| Number of Circuits | 2 | Channels |
| Slew Rate | 9 | V/µs |
| Gain Bandwidth Product | 10 | MHz |
| Current - Input Bias | 200 | nA |
| Voltage - Input Offset | 500 | µV |
| Current - Supply (per Channel) | 8 | mA |
| Current - Output / Channel | 38 | mA |
| Voltage - Supply Span (Min) | 10 | V |
| Voltage - Supply Span (Max) | 30 | V |
| Operating Temperature Range | -40 to 85 | °C |
| Package / Case | 8-SOIC (0.154", 3.90mm Width) | — |
| Mounting Type | Surface Mount | — |
| RoHS Status | ROHS3 Compliant | — |
| Moisture Sensitivity Level | 1 (Unlimited) | — |
Substitute Part Grouping Explanation
Substitute parts for the SA5532D are grouped based on strict electrical and mechanical compatibility criteria. The primary substitution logic is based on the following parameters:
Critical Matching Parameters:
- Package type: 8-SOIC surface-mount configuration
- Number of circuits: 2-channel dual amplifier
- Supply voltage range: Minimum 10V to maximum 30V
- Operating temperature range: -40°C to 85°C or wider
- Mounting type: Surface mount
Secondary Compatibility Parameters:
- Slew rate: 9V/µs or greater
- Gain-bandwidth product: 10 MHz or greater
- Input bias current: 200 nA or lower
- Input offset voltage: 500 µV or lower
- Output current per channel: 38 mA or greater
Substitutes are classified into two categories:
Category 1 - Direct Equivalents (Identical Electrical Performance): Parts that match all critical parameters and maintain equivalent or superior electrical specifications. These include SA5532DR (same base product, different packaging) and ADA4004-2ARZ variants (superior performance characteristics within compatible supply range).
Category 2 - Functional Alternatives (Compatible but Different Characteristics): Parts that meet the 8-SOIC package requirement, dual-circuit configuration, and surface-mount specification but operate with different electrical characteristics. These include AS358 variants (Diodes Incorporated) and LF253/LF353 devices (STMicroelectronics). These alternatives function in the same application space but with different input bias current, offset voltage, or slew rate specifications.
Parameter Comparison
| Part Number | Manufacturer | Product Status | Slew Rate (V/µs) | GBW (MHz) | Input Bias (nA) | Input Offset (µV) | Supply Min (V) | Supply Max (V) | Temp Range (°C) | Package |
|---|---|---|---|---|---|---|---|---|---|---|
| SA5532D | Texas Instruments | Last Time Buy | 9 | 10 | 200 | 500 | 10 | 30 | -40 to 85 | 8-SOIC |
| SA5532DR | Texas Instruments | Active | 9 | 10 | 200 | 500 | 10 | 30 | -40 to 85 | 8-SOIC |
| ADA4004-2ARZ | Analog Devices Inc. | Active | 2.7 | 12 | 40 | 40 | 10 | 30 | -40 to 125 | 8-SOIC |
| ADA4004-2ARZ-R7 | Analog Devices Inc. | Active | 2.7 | 12 | 40 | 40 | 10 | 30 | -40 to 125 | 8-SOIC |
| ADA4004-2ARZ-RL | Analog Devices Inc. | Active | 2.7 | 12 | 40 | 40 | 10 | 30 | -40 to 125 | 8-SOIC |
| AS358AMTR-E1 | Diodes Incorporated | Active | — | — | 20 | 2000 | 3 | 36 | -40 to 85 | 8-SOIC |
| AS358AMTR-G1 | Diodes Incorporated | Active | — | — | 20 | 2000 | 3 | 36 | -40 to 85 | 8-SOIC |
| AS358MTR-E1 | Diodes Incorporated | Active | — | — | 20 | 2000 | 3 | 36 | -40 to 85 | 8-SOIC |
| AS358MTR-G1 | Diodes Incorporated | Active | — | — | 20 | 2000 | 3 | 36 | -40 to 85 | 8-SOIC |
| LF253DT | STMicroelectronics | Active | 16 | 4 | 20 | 3000 | 6 | 36 | -40 to 105 | 8-SOIC |
| LF353DT | STMicroelectronics | Active | 16 | 4 | 20 | 3000 | 6 | 36 | 0 to 70 | 8-SOIC |
Engineering Selection Recommendations
Primary Recommendation: SA5532DR
The SA5532DR is the direct equivalent substitute for the SA5532D. Both parts share identical electrical specifications, including slew rate (9V/µs), gain-bandwidth product (10 MHz), input bias current (200 nA), and input offset voltage (500 µV). The SA5532DR is manufactured by Texas Instruments with Active product status, ensuring long-term availability. The only difference is packaging format: SA5532DR is supplied in Cut Tape (CT) & Digi-Reel® format rather than Tube. Both are ROHS3 compliant with MSL 1 rating. This part is the preferred substitute for direct replacement in existing designs.
Secondary Recommendation: ADA4004-2ARZ Series
The ADA4004-2ARZ, ADA4004-2ARZ-R7, and ADA4004-2ARZ-RL are functionally compatible alternatives manufactured by Analog Devices Inc. These devices operate within the same 10V to 30V supply range and maintain the 8-SOIC package configuration. The ADA4004 series offers superior electrical performance: lower input bias current (40 nA versus 200 nA), lower input offset voltage (40 µV versus 500 µV), and higher gain-bandwidth product (12 MHz versus 10 MHz). The extended operating temperature range (-40°C to 125°C versus -40°C to 85°C) provides additional thermal margin. All variants are ROHS3 compliant with MSL 1 rating and Active product status. Selection among the three variants depends on packaging requirements: ADA4004-2ARZ (Tube), ADA4004-2ARZ-R7 (Cut Tape & Digi-Reel®), or ADA4004-2ARZ-RL (Tape & Reel).
Tertiary Recommendation: AS358 Series
The AS358AMTR-E1, AS358AMTR-G1, AS358MTR-E1, and AS358MTR-G1 devices manufactured by Diodes Incorporated are functional alternatives suitable for applications where the lower supply voltage minimum (3V versus 10V) and extended maximum supply voltage (36V versus 30V) provide design flexibility. These parts maintain the 8-SOIC package and dual-circuit configuration. However, the AS358 series exhibits higher input offset voltage (2 mV versus 500 µV) and lower input bias current (20 nA versus 200 nA). All variants are ROHS3 compliant and Active. Selection among variants depends on packaging format and moisture sensitivity requirements: AS358AMTR variants feature MSL 1, while AS358MTR variants feature MSL 3.
Alternative Consideration: LF253DT and LF353DT
The LF253DT and LF353DT manufactured by STMicroelectronics are J-FET amplifiers with significantly different electrical characteristics. These devices feature higher slew rate (16V/µs versus 9V/µs), lower input bias current (20 pA versus 200 nA), and extended supply voltage range (6V to 36V). However, the gain-bandwidth product is lower (4 MHz versus 10 MHz), and input offset voltage is higher (3 mV versus 500 µV). These parts are suitable only for applications where the specific J-FET characteristics and lower bandwidth requirement are acceptable. LF253DT operates across -40°C to 105°C; LF353DT operates across 0°C to 70°C. Both are ROHS3 compliant with MSL 1 rating.
Frequently Asked Questions (FAQ)
Q: Can SA5532DR be used as a direct replacement for SA5532D?
A: Yes. The SA5532DR is electrically identical to the SA5532D. Both devices share the same slew rate (9V/µs), gain-bandwidth product (10 MHz), input bias current (200 nA), input offset voltage (500 µV), and supply voltage range (10V to 30V). The only difference is packaging format: SA5532DR is supplied in Cut Tape & Digi-Reel® format, while SA5532D is supplied in Tube. Both are surface-mount 8-SOIC packages with identical pinout and electrical performance.
Q: What is the key difference between SA5532DR and ADA4004-2ARZ?
A: Both parts operate within the same 10V to 30V supply range and use the 8-SOIC package. The primary differences are: (1) ADA4004-2ARZ has lower input bias current (40 nA versus 200 nA), (2) ADA4004-2ARZ has lower input offset voltage (40 µV versus 500 µV), (3) ADA4004-2ARZ has higher gain-bandwidth product (12 MHz versus 10 MHz), and (4) ADA4004-2ARZ has extended operating temperature range (-40°C to 125°C versus -40°C to 85°C). The ADA4004-2ARZ is suitable for applications requiring lower noise and offset specifications.
Q: Can AS358 devices replace SA5532D in all applications?
A: AS358 devices are functionally compatible in terms of package and dual-circuit configuration but exhibit different electrical characteristics. The AS358 has lower input bias current (20 nA versus 200 nA) and higher input offset voltage (2 mV versus 500 µV). The AS358 operates across a wider supply range (3V to 36V versus 10V to 30V). Substitution is acceptable only in applications where the higher input offset voltage and different input bias current do not degrade performance. Applications requiring precise offset voltage control or low-noise performance may not be suitable for AS358 substitution.
Q: What is the difference between ADA4004-2ARZ, ADA4004-2ARZ-R7, and ADA4004-2ARZ-RL?
A: All three variants are electrically identical with the same slew rate (2.7V/µs), gain-bandwidth product (12 MHz), input bias current (40 nA), and input offset voltage (40 µV). The differences are packaging formats: ADA4004-2ARZ is supplied in Tube, ADA4004-2ARZ-R7 is supplied in Cut Tape & Digi-Reel®, and ADA4004-2ARZ-RL is supplied in Tape & Reel. Selection depends on manufacturing and assembly requirements.
Q: Why do LF253DT and LF353DT have different operating temperature ranges?
A: LF253DT is rated for -40°C to 105°C (industrial temperature range), while LF353DT is rated for 0°C to 70°C (commercial temperature range). The LF253DT is suitable for applications requiring extended low-temperature operation; the LF353DT is suitable for standard commercial applications. Both devices are J-FET amplifiers with identical electrical specifications within their respective temperature ranges.
Q: Are all substitute parts ROHS3 compliant?
A: Yes. All substitute parts listed (SA5532DR, ADA4004-2ARZ series, AS358 series, LF253DT, and LF353DT) are ROHS3 compliant. All parts are also REACH Unaffected and classified as EAR99 for export control purposes.
Q: What is the significance of MSL (Moisture Sensitivity Level) ratings?
A: MSL indicates the maximum time a component can be exposed to ambient conditions (30°C, 85% relative humidity) before soldering. SA5532DR, ADA4004-2ARZ series, and LF253DT/LF353DT have MSL 1 (Unlimited), meaning no time restriction. AS358AMTR variants have MSL 1; AS358MTR variants have MSL 3 (168 hours maximum). For high-volume manufacturing or extended storage, MSL 1 rated parts are preferred.
Q: Can I use LF253DT or LF353DT if my application requires 10 MHz bandwidth?
A: No. LF253DT and LF353DT have a gain-bandwidth product of 4 MHz, which is insufficient for applications requiring 10 MHz bandwidth. These J-FET devices are suitable only for applications with bandwidth requirements of 4 MHz or lower. For 10 MHz bandwidth requirement, use SA5532DR, ADA4004-2ARZ series, or AS358 variants.
Q: What is the minimum supply voltage for each substitute part?
A: SA5532D and SA5532DR require minimum 10V supply. ADA4004-2ARZ series requires minimum 10V supply. AS358 series operates at minimum 3V supply. LF253DT and LF353DT require minimum 6V supply. For applications using supply voltages below 10V, only AS358 devices are suitable.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts