SA350-2 Equivalent & Substitute Parts

Part Overview

The SA350-2 is a terminal butt splice connector manufactured by Panduit Corp, designed for inline, individual openings crimp termination applications. This component accommodates 350MCM (kcmil) wire gauge with non-insulated, gel-filled construction and brown coloring. The SA350-2 is currently discontinued at DiGi Electronics, necessitating identification of functionally equivalent alternatives to maintain supply chain continuity for applications requiring this connector type.

Substiute Parts

SA350-2

Panduit CorpIn Stock: 1119SA350-2 Datasheet

Current PartRFQ

SA350-15

Panduit CorpIn Stock: 1172SA350-15 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the SA350-2 is determined by strict equivalence across the following critical parameters:

• Wire Gauge: 350MCM (kcmil) specification must be maintained
• Terminal Type: Butt splice, inline configuration with individual openings
• Number of Wire Entries: Two-entry design
• Termination Method: Crimp-based connection
• Insulation Classification: Non-insulated construction
• Color: Brown designation
• Manufacturer: Panduit Corp Pan-Lug™ series

The SA350-15 meets all substitution criteria as a functionally equivalent alternative. Both components share identical electrical and mechanical specifications across all critical parameters. The primary distinction is product status: SA350-2 is discontinued, while SA350-15 maintains active status with current inventory availability.

Parameter Comparison

Engineering Selection Recommendations

The SA350-15 is the designated manufacturer-recommended substitute for the discontinued SA350-2. Both components are classified under identical ECCN (EAR99) and HTSUS (8536.90.4000) codes, confirming regulatory equivalence. The SA350-15 maintains active product status with confirmed inventory availability (1127 pieces in stock), ensuring supply chain reliability for new procurements and ongoing applications.

Selection of SA350-15 over SA350-2 is appropriate for all applications requiring 350MCM butt splice crimp terminals with the specified configuration. No functional or electrical performance differences exist between these components based on provided technical parameters.

Frequently Asked Questions (FAQ)

Q: Can SA350-15 be used as a direct replacement for SA350-2?

A: Yes. Both components share identical specifications across all critical parameters: wire gauge (350MCM), terminal type (butt splice, inline, individual openings), termination method (crimp), insulation type (non-insulated), and color (brown). The SA350-15 is the manufacturer-recommended substitute.

Q: Why is the SA350-2 discontinued?

A: The SA350-2 is discontinued at DiGi Electronics. The SA350-15 serves as the active equivalent product from Panduit Corp for this connector category.

Q: Are there any compliance differences between SA350-2 and SA350-15?

A: No. Both components share identical ECCN (EAR99) and HTSUS (8536.90.4000) classifications, confirming regulatory equivalence.

Q: What is the wire gauge specification for these connectors?

A: Both SA350-2 and SA350-15 are rated for 350MCM (kcmil) wire gauge applications.

Q: Are these connectors insulated or non-insulated?

A: Both components feature non-insulated construction with gel-filled, capped design.

Q: What is the packaging format for these terminals?

A: Both SA350-2 and SA350-15 are supplied in bulk packaging.

Q: How many wire entries do these splice connectors accommodate?

A: Both components are configured for two wire entries in a butt splice, inline arrangement with individual openings.