SA30AHB0G Equivalent & Substitute Parts

Part Overview

The SA30AHB0G is a unidirectional Transient Voltage Suppressor (TVS) diode manufactured by Taiwan Semiconductor Corporation, designed for through-hole mounting in DO-204AC (DO-15) axial package configuration. This component provides transient voltage suppression with a 30V reverse standoff voltage and 64.3V maximum clamping voltage at peak pulse current of 10.8A. The part is classified as Automotive grade with AEC-Q101 qualification and operates across the temperature range of -55°C to 175°C (TJ).

The SA30AHB0G has been discontinued at DiGi Electronics. Identifying equivalent substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production requirements for applications utilizing this TVS diode specification.

Substiute Parts

SA30AHB0G

Taiwan Semiconductor CorporationIn Stock: 777SA30AHB0G Datasheet

Current PartRFQ

SA30AHA0G

Taiwan Semiconductor CorporationIn Stock: 1067SA30AHA0G Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the SA30AHB0G is determined by strict equivalence across the following critical electrical and mechanical parameters:

Electrical Parameters:

• Voltage - Reverse Standoff (Typ): 30V
• Voltage - Breakdown (Min): 33.3V
• Voltage - Clamping (Max) @ Ipp: 64.3V
• Current - Peak Pulse (10/1000µs): 10.8A
• Power - Peak Pulse: 500W

Mechanical Parameters:

• Package / Case: DO-204AC (DO-15) Axial
• Mounting Type: Through Hole
• Unidirectional Channels: 1

Compliance & Qualification:

• Grade: Automotive
• Qualification: AEC-Q101
• RoHS Status: ROHS3 Compliant

Substitute parts must match all electrical specifications, maintain identical package configuration, and retain automotive-grade qualification with AEC-Q101 certification. The SA30AHA0G meets these criteria as a direct equivalent.

Parameter Comparison

Engineering Selection Recommendations

The SA30AHA0G is a direct equivalent substitute for the SA30AHB0G. Both components are manufactured by Taiwan Semiconductor Corporation within the SA series and share identical electrical specifications, package configuration, and automotive-grade qualification.

Selection Basis:

The SA30AHA0G maintains active product status, whereas the SA30AHB0G is discontinued. Both parts satisfy identical electrical requirements: 30V reverse standoff voltage, 33.3V minimum breakdown voltage, 64.3V maximum clamping voltage, and 10.8A peak pulse current. Both are qualified to AEC-Q101 automotive standards and comply with ROHS3 and REACH requirements.

The SA30AHA0G is suitable for direct replacement in applications currently specified for the SA30AHB0G. No circuit modifications or design changes are required. The through-hole DO-204AC (DO-15) axial package configuration is identical, enabling direct board-level substitution.

Frequently Asked Questions (FAQ)

Q: Can the SA30AHA0G be used as a direct replacement for the SA30AHB0G?

A: Yes. The SA30AHA0G is a direct equivalent substitute. All electrical parameters, package configuration, and automotive qualifications are identical. No circuit modifications are required.

Q: What is the primary difference between these two parts?

A: The SA30AHB0G is discontinued at DiGi Electronics, while the SA30AHA0G maintains active product status. All technical specifications remain identical.

Q: Are both parts automotive-grade qualified?

A: Yes. Both the SA30AHB0G and SA30AHA0G carry Automotive grade classification and AEC-Q101 qualification.

Q: Do these parts use the same package?

A: Yes. Both components use the DO-204AC (DO-15) axial through-hole package. They are mechanically and electrically interchangeable at the board level.

Q: Are there any compliance differences between these parts?

A: No. Both parts are ROHS3 compliant, REACH unaffected, and carry identical moisture sensitivity levels (MSL 1 - Unlimited).

Q: What are the critical electrical parameters that define substitution?

A: Substitution is determined by matching: 30V reverse standoff voltage, 33.3V minimum breakdown voltage, 64.3V maximum clamping voltage, 10.8A peak pulse current, and 500W peak pulse power rating.

Q: Can these parts be used in non-automotive applications?

A: Yes. Automotive-grade components are suitable for general industrial and commercial applications. The AEC-Q101 qualification indicates enhanced reliability and testing standards.