SA205C473KARC Equivalent & Substitute Parts

Part Overview

The SA205C473KARC is a 0.047 µF ceramic capacitor rated at 50V with X7R temperature coefficient, manufactured by KYOCERA AVX as part of the SpinGuard® SA series. This through-hole axial component is designed for general-purpose applications and maintains active product status. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility allow direct replacement in circuit designs.

Substiute Parts

SA205C473KARC

KYOCERA AVXIn Stock: 952SA205C473KARC Datasheet

Current PartRFQ

SA105C473KAR

KYOCERA AVXIn Stock: 10126SA105C473KAR Datasheet

DirectRFQ

C410C473K5R5TA7200

KEMETIn Stock: 18580C410C473K5R5TA7200 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SA205C473KARC are qualified based on the following criteria:

• Electrical Equivalence: Capacitance value of 0.047 µF, tolerance of ±10%, voltage rating of 50V, and X7R temperature coefficient must match exactly
• Mechanical Compatibility: Through-hole axial mounting with straight leads
• Environmental Compliance: ROHS3 compliance and REACH unaffected status
• Operating Conditions: Temperature range of -55°C ~ 125°C

The SA205C473KARC has two qualified substitutes that meet all electrical and mechanical requirements while maintaining full compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

Both substitute parts maintain full electrical and compliance equivalence to the SA205C473KARC. Selection between alternatives should be based on:

• Packaging Requirements: The main part is supplied in Tape & Box format, while both substitutes are available in Cut Tape format
• Physical Dimensions: The SA105C473KAR and C410C473K5R5TA7200 have reduced axial length (0.170" vs 0.260"), which may affect board layout considerations
• Manufacturer Preference: KYOCERA AVX SA105C473KAR maintains the same manufacturer as the main part; KEMET C410C473K5R5TA7200 provides cross-manufacturer equivalence
• Inventory Availability: All parts maintain active product status with substantial stock levels

Frequently Asked Questions (FAQ)

Q: Can SA105C473KAR replace SA205C473KARC directly? A: Yes. Both parts share identical electrical specifications (0.047 µF, ±10%, 50V, X7R) and mechanical compatibility (through-hole axial, straight leads). The primary difference is physical length: SA105C473KAR measures 0.170" versus SA205C473KARC at 0.260". Verify board layout clearance before substitution.

Q: What is the difference between SA205C473KARC and C410C473K5R5TA7200? A: Both deliver equivalent electrical performance and operating characteristics. The main differences are manufacturer (KYOCERA AVX vs KEMET) and packaging format (Tape & Box vs Cut Tape). Physical dimensions are identical to SA105C473KAR at 0.170" length.

Q: Are all substitute parts ROHS3 compliant? A: Yes. SA205C473KARC, SA105C473KAR, and C410C473K5R5TA7200 are all ROHS3 compliant and REACH unaffected.

Q: Does the shorter length of substitute parts affect circuit performance? A: No. The reduced axial length does not alter electrical performance. Substitutes are suitable for applications where the main part's 0.260" length was specified, provided board layout accommodates the shorter 0.170" dimension.

Q: What packaging formats are available? A: SA205C473KARC is supplied in Tape & Box format. SA105C473KAR and C410C473K5R5TA7200 are supplied in Cut Tape format.