SA1/0-X Equivalent & Substitute Parts

Part Overview

The SA1/0-X is a Terminal Butt Splice connector manufactured by Panduit Corp, designed for inline, individual openings crimp termination of 1/0 AWG wire. This non-insulated, gel-filled connector features a tan color and is part of the Pan-Lug™ series. The SA1/0-X is currently discontinued at DiGi Electronics, necessitating identification of equivalent substitute components that maintain identical electrical and mechanical specifications for continued system integration and maintenance applications.

Substiute Parts

SA1/0-X

Panduit CorpIn Stock: 794SA1/0-X Datasheet

Current PartRFQ

SA1/0-L

Panduit CorpIn Stock: 753SA1/0-L Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the SA1/0-X is based on strict equivalence across all critical electrical and mechanical parameters. The substitute part SA1/0-L maintains identical specifications in the following key areas:

• Wire Gauge Compatibility: Both parts terminate 1/0 AWG conductors
• Terminal Configuration: Both are butt splice connectors with inline, individual openings design
• Termination Method: Both utilize crimp termination technology
• Electrical Properties: Both are non-insulated connectors with gel-filled construction
• Physical Characteristics: Both feature tan coloring and identical connector geometry
• Wire Entry Count: Both accommodate exactly 2 wire entries
• Regulatory Compliance: Both maintain ROHS3 compliance and REACH unaffected status
• Manufacturer: Both are manufactured by Panduit Corp

The SA1/0-L represents an active product status alternative, ensuring continued availability for applications requiring SA1/0-X specifications.

Parameter Comparison

Engineering Selection Recommendations

The SA1/0-L is a direct functional equivalent to the SA1/0-X for all applications requiring 1/0 AWG butt splice crimp termination. Selection of the SA1/0-L is supported by:

• Product Availability: The SA1/0-L maintains active product status, ensuring supply chain continuity
• Regulatory Alignment: Both parts maintain identical ROHS3 compliance and REACH unaffected status, satisfying environmental and safety requirements
• Electrical Equivalence: Identical wire gauge, termination method, and connector configuration ensure electrical performance parity
• Mechanical Compatibility: Matching terminal type, insulation specification, and physical dimensions confirm mechanical interchangeability
• Export Classification: Both parts share identical ECCN and HTSUS classifications, maintaining regulatory consistency

The SA1/0-L is suitable for direct substitution in all applications previously specified for the SA1/0-X.

Frequently Asked Questions (FAQ)

Q: Can the SA1/0-L be used as a direct replacement for the SA1/0-X?

A: Yes. The SA1/0-L is electrically and mechanically equivalent to the SA1/0-X across all specified parameters, including wire gauge, termination method, connector configuration, and regulatory compliance.

Q: What is the primary difference between the SA1/0-X and SA1/0-L?

A: The primary difference is product status. The SA1/0-X is discontinued at DiGi Electronics, while the SA1/0-L maintains active product status, ensuring continued availability.

Q: Are there any compatibility concerns when substituting the SA1/0-L for the SA1/0-X?

A: No compatibility concerns exist. Both connectors are manufactured by Panduit Corp and maintain identical specifications for terminal type, wire gauge, termination method, insulation, and physical dimensions.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both the SA1/0-X and SA1/0-L are ROHS3 compliant and REACH unaffected, maintaining identical regulatory status.

Q: What wire gauge do these connectors accommodate?

A: Both connectors are rated for 1/0 AWG wire termination.

Q: Is the gel-filled feature present in both parts?

A: Yes. Both the SA1/0-X and SA1/0-L feature gel-filled construction with cap design.

Q: Are these connectors insulated or non-insulated?

A: Both connectors are non-insulated terminals.

Q: What is the packaging format for these parts?

A: Both parts are supplied in bulk packaging.