SA101C222KARC Equivalent & Substitute Parts

Part Overview

The SA101C222KARC is a 2200 pF ceramic capacitor rated at 100V with X7R temperature coefficient, manufactured by KYOCERA AVX in the SpinGuard® SA series. This through-hole axial component is designed for general-purpose applications requiring stable capacitance across a wide operating temperature range of -55°C to 125°C. The part is currently active in production with 811 units in stock. Equivalent and substitute parts are identified to support procurement flexibility, supply chain continuity, and design alternatives when the primary part becomes unavailable or when specific packaging or sourcing requirements necessitate component substitution.

Substiute Parts

SA101C222KARC

KYOCERA AVXIn Stock: 916SA101C222KARC Datasheet

Current PartRFQ

A222K15X7RH5UAA

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 12795A222K15X7RH5UAA Datasheet

DirectRFQ

C410C222K1R5TA7200

KEMETIn Stock: 13642C410C222K1R5TA7200 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SA101C222KARC is determined by strict equivalence across the following critical parameters:

• Capacitance value: 2200 pF (exact match required)
• Tolerance: ±10% (exact match required)
• Voltage rating: 100V (exact match required)
• Temperature coefficient: X7R (exact match required)
• Operating temperature range: -55°C to 125°C (exact match required)
• Mounting type: Through Hole (exact match required)
• Package type: Axial (exact match required)
• Lead style: Straight (exact match required)

All identified substitute parts meet these criteria. Physical dimensions may vary within acceptable tolerances for through-hole axial components, provided the parts fit standard PCB hole spacing and component placement requirements.

Parameter Comparison

Engineering Selection Recommendations

All three parts are active products with full regulatory compliance. Selection between SA101C222KARC, A222K15X7RH5UAA, and C410C222K1R5TA7200 should be based on:

• Packaging format: SA101C222KARC and C410C222K1R5TA7200 are supplied in Tape & Box and Cut Tape formats respectively, while A222K15X7RH5UAA is supplied in Cut Tape format.
• Physical dimensions: C410C222K1R5TA7200 and SA101C222KARC share identical dimensions (0.100" Dia x 0.170" L). A222K15X7RH5UAA has slightly smaller dimensions (0.098" Dia x 0.150" L), which may affect PCB layout compatibility in space-constrained applications.
• Inventory availability: A222K15X7RH5UAA (12,736 units) and C410C222K1R5TA7200 (13,617 units) offer higher stock levels compared to SA101C222KARC (811 units).
• Manufacturer series: SA101C222KARC belongs to the SpinGuard® SA series, A222K15X7RH5UAA to the A series, and C410C222K1R5TA7200 to the AxiMax 400 Comm X7R series.

All parts meet identical electrical specifications and regulatory requirements.

Frequently Asked Questions (FAQ)

Q: Can A222K15X7RH5UAA be used as a direct replacement for SA101C222KARC?

A: A222K15X7RH5UAA meets all electrical specifications and is electrically equivalent. However, its physical dimensions (0.098" Dia x 0.150" L) differ from SA101C222KARC (0.100" Dia x 0.170" L). Verify PCB hole spacing and component placement clearances before substitution.

Q: What is the difference between the three substitute parts?

A: All three parts are electrically identical with 2200 pF capacitance, ±10% tolerance, 100V rating, and X7R temperature coefficient. Differences exist in physical dimensions, packaging format, manufacturer series designation, and stock availability. C410C222K1R5TA7200 matches SA101C222KARC in physical dimensions exactly.

Q: Are all substitute parts RoHS and REACH compliant?

A: Yes. All three parts are ROHS3 Compliant and REACH Unaffected, meeting current environmental and regulatory standards.

Q: Which substitute part has the best availability?

A: C410C222K1R5TA7200 (KEMET) has the highest inventory at 13,617 units, followed by A222K15X7RH5UAA (Vishay) at 12,736 units.

Q: Can these parts be used interchangeably in automated assembly?

A: Physical dimensions must be verified for automated pick-and-place equipment compatibility. C410C222K1R5TA7200 is dimensionally identical to SA101C222KARC. A222K15X7RH5UAA has smaller dimensions and may require equipment recalibration.