Equivalent & Substitute Parts Reference for S8GL-TP

Part Overview

The S8GL-TP by Micro Commercial Co is a surface mount standard recovery diode in the DO-214AB (SMC) package, rated at 400 V reverse voltage and 8 A average rectified current. It features low reverse leakage and is classified in the Diodes, Rectifiers category. This part is listed as "Not For New Designs," which necessitates the identification of equivalent or substitute models for ongoing or future design integrations where direct replacement is required.

Substiute Parts

S8GL-TP

Micro Commercial CoIn Stock: 887S8GL-TP Datasheet

Current PartRFQ

S5G-M3/9AT

Vishay General Semiconductor - Diodes DivisionIn Stock: 816S5G-M3/9AT Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts are determined by matching the category (Diodes, Rectifiers), standard diode technology, equivalent DC reverse voltage rating, compatible mounting type, identical package/case (DO-214AB, SMC), and similar operating temperature range. The substitution is valid when these essential parameters align, regardless of differences in average rectified current or detailed electrical characteristics.

Key parameters used for substitution:

• Category: Diodes, Rectifiers
• Technology: Standard
• Voltage - DC Reverse (Vr) (Max): 400 V
• Mounting Type: Surface Mount
• Package / Case: DO-214AB, SMC
• Supplier Device Package: DO-214AB (SMC)
• Operating Temperature - Junction: -55°C ~ 150°C

Parameter Comparison

Engineering Selection Recommendations

The S8GL-TP is designated "Not For New Designs" while the substitute S5G-M3/9AT is listed as "Active." For new procurements and design activities, substitute parts with an "Active" status should be used. Both S8GL-TP and S5G-M3/9AT show REACH unaffected compliance, and S5G-M3/9AT is RoHS3 compliant, with unlimited moisture sensitivity level (MSL 1). Only base product status and compliance information from the input are referenced.

Frequently Asked Questions (FAQ)

Q: How is substitute compatibility determined for S8GL-TP?
A: Substitutes must match the category, technology, voltage rating, mounting type, package/case, and operating temperature range as specified.

Q: Is package equivalence required for substitution?
A: Yes. Both the S8GL-TP and its substitutes use the DO-214AB (SMC) surface mount package and supplier device package, ensuring mechanical compatibility.

Q: Do compliance certifications affect substitution?
A: Product status, REACH, and RoHS compliance are used to select substitutes according to the provided inventory and compliance designations.

Q: Are substitute parts always identical electrically?
A: Substitute parts must match all specified key parameters but can have different values for non-matching fields such as average rectified current or capacitance, as per the provided data.

Q: Can S5G-M3/9AT be used wherever S8GL-TP was previously specified?
A: S5G-M3/9AT matches the required parameters per the input, including mounting, package, voltage, and technology, and is active in production and inventory.