S-8337ACAC-T8T1G Equivalent & Substitute Parts

Part Overview

The S-8337ACAC-T8T1G is a Boost Regulator Positive Output Step-Up DC-DC Controller IC manufactured by ABLIC Inc. in 8-TSSOP surface mount packaging. This device functions as a transistor driver for step-up (boost) topology applications with a single output phase, operating across a 1.8V to 6V supply voltage range. The part is classified as Not For New Designs, making identification of active equivalent alternatives essential for ongoing production and design continuity.

Key Parameters

Parameter	Value
Manufacturer	ABLIC Inc.
Category	Power Management (PMIC)
Function	Step-Up (Boost) DC-DC Controller
Output Type	Transistor Driver
Output Configuration	Positive
Number of Outputs	1
Voltage Supply Range (Vcc/Vdd)	1.8V ~ 6V
Frequency - Switching	257.4kHz ~ 1.134MHz
Duty Cycle (Max)	89%
Operating Temperature	-40°C ~ 85°C (TA)
Package / Case	8-TSSOP (0.173", 4.40mm Width)
Mounting Type	Surface Mount
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the S-8337ACAC-T8T1G is determined by strict alignment across the following critical parameters:

Primary Substitution Criteria:

Identical boost regulator topology and positive output configuration
Matching 8-TSSOP package and 4.40mm width physical dimensions
Voltage supply range: 1.8V ~ 6V
Maximum duty cycle: 89%
Operating temperature range: -40°C ~ 85°C
Surface mount mounting type
ROHS3 compliance and MSL 1 rating

Switching Frequency Tolerance: The S-8337ACAC-T8T1G operates at 257.4kHz ~ 1.134MHz. Substitute parts from the S-8333 series operate at 280kHz ~ 1.08MHz, representing a narrower frequency band within the original specification window. This difference reflects internal design variations while maintaining functional compatibility for boost regulation applications.

Control Features Variation: The main part includes Current Limit, Enable, and Frequency Control features. Most S-8333 series substitutes provide Current Limit and Frequency Control. The S-8337ABIA-T8T1U maintains all three control features, matching the original specification exactly.

Product Status Consideration: The S-8337ACAC-T8T1G is Not For New Designs. All listed substitutes carry Active product status, making them suitable for production continuity and new design implementations.

Parameter Comparison

Part Number	Manufacturer	Product Status	Packaging	Vcc/Vdd Range	Switching Frequency	Duty Cycle (Max)	Control Features	Operating Temp	Inventory (Pcs)
S-8337ACAC-T8T1G	ABLIC Inc.	Not For New Designs	Tape & Reel (TR)	1.8V ~ 6V	257.4kHz ~ 1.134MHz	89%	Current Limit, Enable, Frequency Control	-40°C ~ 85°C	1107
S-8333CBDA-T8T1U	ABLIC Inc.	Active	Tape & Reel (TR)	1.8V ~ 6V	280kHz ~ 1.08MHz	89%	Current Limit, Frequency Control	-40°C ~ 85°C	974
S-8333CCBC-T8T1U	ABLIC Inc.	Active	Cut Tape (CT)	1.8V ~ 6V	280kHz ~ 1.08MHz	89%	Current Limit, Frequency Control	-40°C ~ 85°C	728
S-8333TCDA-T8T1U	ABLIC Inc.	Active	Tape & Reel (TR)	1.8V ~ 6V	280kHz ~ 1.08MHz	89%	Current Limit, Frequency Control	-40°C ~ 85°C	1053
S-8333TCDB-T8T1U	ABLIC Inc.	Active	Tape & Reel (TR)	1.8V ~ 6V	280kHz ~ 1.08MHz	89%	Current Limit, Frequency Control	-40°C ~ 85°C	1002
S-8333TCDC-T8T1U	ABLIC Inc.	Active	Tape & Reel (TR)	1.8V ~ 6V	280kHz ~ 1.08MHz	89%	Current Limit, Frequency Control	-40°C ~ 85°C	935
S-8333TCIA-T8T1U	ABLIC Inc.	Active	Tape & Reel (TR)	1.8V ~ 6V	280kHz ~ 1.08MHz	89%	Current Limit, Frequency Control	-40°C ~ 85°C	1069
S-8333TCIB-T8T1U	ABLIC Inc.	Active	Tape & Reel (TR)	1.8V ~ 6V	280kHz ~ 1.08MHz	89%	Current Limit, Frequency Control	-40°C ~ 85°C	733
S-8333TCIC-T8T1U	ABLIC Inc.	Active	Tape & Reel (TR)	1.8V ~ 6V	280kHz ~ 1.08MHz	89%	Current Limit, Frequency Control	-40°C ~ 85°C	1059
S-8337ABIA-T8T1U	ABLIC Inc.	Active	Cut Tape (CT)	1.8V ~ 6V	257.4kHz ~ 1.134MHz	89%	Current Limit, Enable, Frequency Control	-40°C ~ 85°C	760

Engineering Selection Recommendations

Primary Recommendation: S-8337ABIA-T8T1U

The S-8337ABIA-T8T1U provides the closest functional match to the S-8337ACAC-T8T1G. Both parts share identical switching frequency specifications (257.4kHz ~ 1.134MHz) and control feature sets (Current Limit, Enable, Frequency Control). The S-8337ABIA-T8T1U carries Active product status and maintains full ROHS3 compliance and MSL 1 rating. The only packaging difference is Cut Tape (CT) versus Tape & Reel (TR), which affects handling and assembly logistics but not electrical performance.

Secondary Recommendations: S-8333 Series (CBDA, TCDA, TCDB, TCDC, TCIA, TCIB, TCIC)

All S-8333 series parts are functionally equivalent boost regulators with Active product status. These parts operate within a narrower switching frequency band (280kHz ~ 1.08MHz) and omit the Enable control feature present in the original design. Selection from this group depends on packaging preference and inventory availability. Tape & Reel variants (TCDA, TCDB, TCDC, TCIA, TCIB, TCIC) maintain the original packaging format, while CBDA and CCBC are available in alternative packaging configurations.

Compliance and Certification:

All substitute parts maintain ROHS3 compliance, MSL 1 rating, and identical operating temperature specifications (-40°C ~ 85°C). All parts are manufactured by ABLIC Inc. and carry EAR99 ECCN classification with REACH Unaffected status, matching the original part's regulatory profile.

Frequently Asked Questions (FAQ)

Q: Can S-8333 series parts directly replace the S-8337ACAC-T8T1G?

A: S-8333 series parts are parametrically equivalent for boost regulation topology, voltage supply range, duty cycle, and thermal specifications. The primary functional difference is the absence of the Enable control feature in S-8333 variants. If the Enable function is not utilized in the circuit design, S-8333 parts provide full substitution capability. If Enable control is required, use S-8337ABIA-T8T1U instead.

Q: What is the significance of the switching frequency difference between S-8337 and S-8333 series?

A: The S-8337ACAC-T8T1G operates at 257.4kHz ~ 1.134MHz, while S-8333 series parts operate at 280kHz ~ 1.08MHz. Both ranges fall within typical boost converter operating windows. The narrower S-8333 range reflects design optimization but does not affect compatibility for standard boost regulation applications. Frequency selection impacts output ripple, component sizing, and EMI characteristics—verify against your specific circuit requirements.

Q: Does packaging format (Tape & Reel vs. Cut Tape) affect electrical performance?

A: No. Packaging format affects only handling, storage, and assembly processes. Tape & Reel (TR) packaging is optimized for automated pick-and-place assembly, while Cut Tape (CT) is suitable for manual or lower-volume assembly. Electrical specifications and performance remain identical regardless of packaging format.

Q: Why is the S-8337ACAC-T8T1G marked as Not For New Designs?

A: This designation indicates the part has reached end-of-life status within ABLIC's product portfolio. All listed substitutes carry Active status, making them suitable for both production continuity of existing designs and implementation in new applications. Migration to an Active equivalent is recommended for long-term supply chain stability.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All substitute parts listed maintain ROHS3 compliance, MSL 1 (Unlimited) moisture sensitivity rating, and identical operating temperature specifications. Regulatory and environmental compliance profiles are consistent across all alternatives.

Q: Which substitute offers the best inventory availability?

A: S-8333TCIA-T8T1U offers the highest inventory level at 1,069 pieces, followed by S-8333TCIC-T8T1U at 1,059 pieces and S-8333TCDA-T8T1U at 1,053 pieces. All S-8333 variants maintain substantial stock levels exceeding 700 pieces, ensuring supply continuity.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message