S-8337ABEC-T8T1G Equivalent & Substitute Parts

Part Overview

The S-8337ABEC-T8T1G is a Boost Regulator Positive Output Step-Up DC-DC Controller IC manufactured by ABLIC Inc. in 8-TSSOP surface mount packaging. This component functions as a transistor driver for step-up (boost) topology power management applications with a single output phase. The part is classified as Not For New Designs, making identification of active equivalent alternatives essential for ongoing production and design continuity.

Key Parameters

Parameter	Value
Manufacturer	ABLIC Inc.
Category	Power Management (PMIC)
Function	Step-Up (Boost)
Output Type	Transistor Driver
Output Configuration	Positive
Number of Outputs	1
Voltage Supply Range (Vcc/Vdd)	1.8V ~ 6V
Switching Frequency Range	257.4kHz ~ 1.134MHz
Maximum Duty Cycle	89%
Operating Temperature Range	-40°C ~ 85°C (TA)
Package / Case	8-TSSOP (0.173", 4.40mm Width)
Mounting Type	Surface Mount
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the S-8337ABEC-T8T1G is determined by the following critical parameters:

Primary Equivalence Criteria:

Identical boost regulator topology and positive output configuration
Matching 8-TSSOP package and 0.173" (4.40mm) width
Supply voltage range: 1.8V ~ 6V
Maximum duty cycle: 89%
Operating temperature: -40°C ~ 85°C
Surface mount mounting type
RoHS3 compliance and MSL 1 rating

Control Feature Variations: The S-8337ABEC-T8T1G includes Enable and Frequency Control features. Substitute parts from the S-8333 series provide Current Limit and Frequency Control. The S-8333 variants lack the Enable control feature but maintain functional equivalence for boost regulation applications where enable control is not required.

Switching Frequency Tolerance: The S-8337ABEC-T8T1G operates at 257.4kHz ~ 1.134MHz. The S-8333 series operates at 280kHz ~ 1.08MHz, representing a narrower frequency band within the original specification range.

Packaging Format: Substitute parts are available in both Tape & Reel (TR) and Cut Tape (CT) formats. The original part is supplied in Tape & Reel format.

Parameter Comparison

Part Number	Manufacturer	Packaging	Product Status	Switching Frequency (kHz)	Control Features	Inventory (Pcs)
S-8337ABEC-T8T1G	ABLIC Inc.	Tape & Reel (TR)	Not For New Designs	257.4 ~ 1134	Current Limit, Enable, Frequency Control	997
S-8333CBDA-T8T1U	ABLIC Inc.	Tape & Reel (TR)	Active	280 ~ 1080	Current Limit, Frequency Control	974
S-8333CCBC-T8T1U	ABLIC Inc.	Cut Tape (CT)	Active	280 ~ 1080	Current Limit, Frequency Control	728
S-8333TCDA-T8T1U	ABLIC Inc.	Tape & Reel (TR)	Active	280 ~ 1080	Current Limit, Frequency Control	1053
S-8333TCDB-T8T1U	ABLIC Inc.	Tape & Reel (TR)	Active	280 ~ 1080	Current Limit, Frequency Control	1002
S-8333TCDC-T8T1U	ABLIC Inc.	Tape & Reel (TR)	Active	280 ~ 1080	Current Limit, Frequency Control	935
S-8333TCIA-T8T1U	ABLIC Inc.	Tape & Reel (TR)	Active	280 ~ 1080	Current Limit, Frequency Control	1069
S-8333TCIB-T8T1U	ABLIC Inc.	Tape & Reel (TR)	Active	280 ~ 1080	Current Limit, Frequency Control	733
S-8333TCIC-T8T1U	ABLIC Inc.	Tape & Reel (TR)	Active	280 ~ 1080	Current Limit, Frequency Control	1059
S-8337ABIA-T8T1U	ABLIC Inc.	Cut Tape (CT)	Active	257.4 ~ 1134	Current Limit, Enable, Frequency Control	760

Engineering Selection Recommendations

For Active Production Requirements: The S-8337ABIA-T8T1U is the direct functional equivalent of the S-8337ABEC-T8T1G, maintaining identical switching frequency range (257.4kHz ~ 1.134MHz) and control feature set (Current Limit, Enable, Frequency Control). This part carries Active product status and is available in Cut Tape (CT) packaging with 760 units in stock. Selection of this part eliminates design modification requirements.

For Designs Tolerant of Frequency Band Narrowing: The S-8333 series variants (S-8333CBDA-T8T1U, S-8333TCDA-T8T1U, S-8333TCDB-T8T1U, S-8333TCDC-T8T1U, S-8333TCIA-T8T1U, S-8333TCIB-T8T1U, S-8333TCIC-T8T1U) provide Active product status with higher inventory availability. These parts operate within a narrower switching frequency range (280kHz ~ 1.08MHz) and omit the Enable control feature. Selection requires verification that circuit designs do not depend on the Enable pin functionality and that the reduced frequency band accommodates application requirements.

Packaging Considerations: Tape & Reel (TR) format is preferred for high-volume automated assembly. Cut Tape (CT) format is suitable for lower-volume or manual assembly operations. Both formats maintain identical electrical specifications and compliance certifications.

Compliance and Regulatory Status: All substitute parts maintain ROHS3 compliance, MSL 1 (Unlimited) moisture sensitivity rating, and REACH Unaffected status, ensuring regulatory continuity with the original part specification.

Frequently Asked Questions (FAQ)

Q: Can S-8333 series parts directly replace the S-8337ABEC-T8T1G without circuit modification?

A: The S-8333 series provides functional boost regulation equivalence but lacks the Enable control feature present in the S-8337 series. Direct replacement is possible only if the circuit design does not utilize the Enable pin. The narrower switching frequency range (280kHz ~ 1.08MHz versus 257.4kHz ~ 1.134MHz) must be verified against application frequency requirements.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Both formats contain identical components with identical electrical specifications. Tape & Reel (TR) packaging is supplied on continuous carrier tape suitable for automated pick-and-place assembly. Cut Tape (CT) packaging is supplied in shorter tape segments suitable for manual handling or lower-volume assembly processes.

Q: Is the S-8337ABIA-T8T1U a complete substitute for the S-8337ABEC-T8T1G?

A: Yes. The S-8337ABIA-T8T1U maintains identical switching frequency range, control features (Current Limit, Enable, Frequency Control), and electrical specifications. The only difference is packaging format (Cut Tape versus Tape & Reel) and Active product status versus Not For New Designs status.

Q: Why does the original part have "Not For New Designs" status?

A: This designation indicates the manufacturer has transitioned the part to end-of-life status. Active equivalent alternatives are available to support existing designs and production continuity. New designs should select from the Active product status alternatives listed.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts maintain ROHS3 compliance, MSL 1 rating, and REACH Unaffected status, ensuring regulatory equivalence with the original S-8337ABEC-T8T1G specification.

Q: What inventory levels are available for each substitute part?

A: Inventory ranges from 728 to 1069 units across the substitute part list. The S-8333TCIA-T8T1U offers the highest availability at 1069 units. The S-8337ABIA-T8T1U (direct functional equivalent) has 760 units available.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message