S-82K1BAP-I6T1U Equivalent & Substitute Parts

Part Overview

The S-82K1BAP-I6T1U is a lithium-ion battery protection integrated circuit manufactured by ABLIC Inc. This single-cell battery protection IC provides over-current and over-voltage fault protection for lithium-ion battery applications. The device is classified as a Power Management IC (PMIC) and is currently in active product status. Equivalent and substitute parts are identified to support component availability, supply chain continuity, and design flexibility while maintaining identical electrical and mechanical specifications.

Substiute Parts

S-82K1BAP-I6T1U

ABLIC Inc.In Stock: 1077S-82K1BAP-I6T1U Datasheet

Current PartRFQ

S-82K1BAM-I6T1U

ABLIC Inc.In Stock: 932S-82K1BAM-I6T1U Datasheet

Parametric EquivalentRFQ

S-82K1BAN-I6T1U

ABLIC Inc.In Stock: 1122S-82K1BAN-I6T1U Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the S-82K1BAP-I6T1U are identified based on parametric equivalence within the S-82K1B series. Substitution is valid when the following criteria are met:

Critical Substitution Parameters:

• Identical battery chemistry (Lithium Ion)
• Identical number of cells (1)
• Identical fault protection functions (Over Current, Over Voltage)
• Identical operating temperature range (-40°C ~ 85°C)
• Identical package type (6-SMD, Flat Leads / SNT-6A)
• Identical mounting type (Surface Mount)
• Identical product status (Active)
• Identical compliance certifications (ROHS3 Compliant, REACH Unaffected)

All substitute parts listed below meet these criteria and are manufactured by ABLIC Inc. within the S-82K1B product series.

Parameter Comparison

Engineering Selection Recommendations

All three parts—S-82K1BAP-I6T1U, S-82K1BAM-I6T1U, and S-82K1BAN-I6T1U—are parametrically equivalent and interchangeable for single-cell lithium-ion battery protection applications. Selection among these parts should be based on:

Availability and Inventory: Current stock levels vary. S-82K1BAN-I6T1U has 1067 pieces in stock, S-82K1BAP-I6T1U has 1025 pieces, and S-82K1BAM-I6T1U has 851 pieces available.

Compliance Certifications: All parts are ROHS3 compliant and REACH unaffected, meeting environmental and regulatory requirements for commercial and industrial applications.

Supply Chain Continuity: Any of the three parts can be substituted without design modification, PCB layout changes, or firmware updates, as they share identical electrical characteristics, thermal specifications, and mechanical packaging.

Frequently Asked Questions (FAQ)

Q: Can S-82K1BAM-I6T1U be used as a direct replacement for S-82K1BAP-I6T1U?

A: Yes. Both parts are parametrically equivalent within the S-82K1B series. They have identical battery protection functions, operating temperature ranges, package types, and compliance certifications. No design changes are required.

Q: Are there any differences in fault protection capabilities between these substitute parts?

A: No. All three parts provide identical over-current and over-voltage protection for single-cell lithium-ion batteries. Fault protection specifications are uniform across the S-82K1B series.

Q: What is the significance of the SNT-6A package designation?

A: SNT-6A is the supplier device package specification for all three parts. This designates a 6-pin surface-mount package with flat leads. This package type is consistent across all substitute parts, ensuring mechanical and electrical compatibility on PCBs designed for any of these components.

Q: Do these parts have different moisture sensitivity levels?

A: The S-82K1BAP-I6T1U does not specify an MSL rating in the provided data. The S-82K1BAM-I6T1U and S-82K1BAN-I6T1U both specify MSL 1 (Unlimited), indicating minimal moisture sensitivity. This does not affect substitution compatibility.

Q: Are there export or tariff considerations when selecting between these parts?

A: The S-82K1BAM-I6T1U and S-82K1BAN-I6T1U are classified under ECCN EAR99 and HTSUS 8542.39.0001. The S-82K1BAP-I6T1U does not specify these classifications in the provided data. For applications requiring export documentation or tariff compliance, verify classification requirements with your procurement department.

Q: Can these parts be mixed in the same production batch?

A: Yes. All three parts are functionally and mechanically identical. They can be used interchangeably in the same design and production environment without affecting circuit performance or reliability.