S-8250BAP-I6T1U Equivalent & Substitute Parts

Part Overview

The S-8250BAP-I6T1U is a Battery Protection IC for single-cell Lithium Ion/Polymer applications manufactured by ABLIC Inc. This PMIC operates across the -40°C to 85°C temperature range and provides over-current fault protection in a 6-SMD surface mount package. The part is classified as Not For New Designs, making identification of active equivalent alternatives essential for ongoing production and new design initiatives.

Key Parameters

Parameter	Value
Manufacturer	ABLIC Inc.
Category	Power Management (PMIC)
Function	Battery Protection
Battery Chemistry	Lithium Ion/Polymer
Number of Cells	1
Fault Protection	Over Current
Operating Temperature	-40°C ~ 85°C (TA)
Mounting Type	Surface Mount
Package / Case	6-SMD, Flat Leads
Supplier Device Package	SNT-6A
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)
REACH Status	REACH Unaffected
Packaging	Tape & Reel (TR)

Substitute Part Grouping Explanation

Substitution eligibility for the S-8250BAP-I6T1U is determined by the following critical parameters:

Battery Chemistry: Lithium Ion/Polymer
Number of Cells: Single cell (1)
Fault Protection Type: Over Current
Package / Case: 6-SMD, Flat Leads
Supplier Device Package: SNT-6A
Operating Temperature Range: -40°C ~ 85°C (TA)
Mounting Type: Surface Mount
RoHS and REACH Compliance: ROHS3 Compliant, REACH Unaffected

All substitute parts listed below match these parameters exactly. The primary distinction among substitutes is product status: the S-8250BAP-I6T1U is Not For New Designs, while all listed equivalents are Active products suitable for both ongoing production and new design implementations.

Parameter Comparison

Part Number	Manufacturer	Product Status	Battery Chemistry	Cells	Fault Protection	Package	Operating Temp	RoHS Status	Inventory (Pcs)
S-8250BAP-I6T1U	ABLIC Inc.	Not For New Designs	Lithium Ion/Polymer	1	Over Current	6-SMD, Flat Leads (SNT-6A)	-40°C ~ 85°C	ROHS3 Compliant	1089
S-8216AAA-I6T1U	ABLIC Inc.	Active	Lithium Ion/Polymer	1	Over Current	6-SMD, Flat Leads (SNT-6A)	-40°C ~ 85°C	ROHS3 Compliant	659
S-8230AAD-I6T1U	ABLIC Inc.	Active	Lithium Ion/Polymer	1	Over Current	6-SMD, Flat Leads (SNT-6A)	-40°C ~ 85°C	ROHS3 Compliant	640
S-8230AAE-I6T1U	ABLIC Inc.	Active	Lithium Ion/Polymer	1	Over Current	6-SMD, Flat Leads (SNT-6A)	-40°C ~ 85°C	ROHS3 Compliant	1049
S-8230AAF-I6T1U	ABLIC Inc.	Active	Lithium Ion/Polymer	1	Over Current	6-SMD, Flat Leads (SNT-6A)	-40°C ~ 85°C	ROHS3 Compliant	682
S-8230BAA-I6T1U	ABLIC Inc.	Active	Lithium Ion/Polymer	1	Over Current	6-SMD, Flat Leads (SNT-6A)	-40°C ~ 85°C	ROHS3 Compliant	668
S-8230BAB-I6T1U	ABLIC Inc.	Active	Lithium Ion/Polymer	1	Over Current	6-SMD, Flat Leads (SNT-6A)	-40°C ~ 85°C	ROHS3 Compliant	1150
S-8230BAE-I6T1U	ABLIC Inc.	Active	Lithium Ion/Polymer	1	Over Current	6-SMD, Flat Leads (SNT-6A)	-40°C ~ 85°C	ROHS3 Compliant	1137
S-8230BAF-I6T1U	ABLIC Inc.	Active	Lithium Ion/Polymer	1	Over Current	6-SMD, Flat Leads (SNT-6A)	-40°C ~ 85°C	ROHS3 Compliant	936
S-8240AAB-I6T1U	ABLIC Inc.	Active	Lithium Ion/Polymer	1	Over Current	6-SMD, Flat Leads (SNT-6A)	-40°C ~ 85°C	ROHS3 Compliant	1229
S-8240AAC-I6T1U	ABLIC Inc.	Active	Lithium Ion/Polymer	1	Over Current	6-SMD, Flat Leads (SNT-6A)	-40°C ~ 85°C	ROHS3 Compliant	1137

Engineering Selection Recommendations

All listed substitute parts are Active products manufactured by ABLIC Inc. and maintain full compliance with ROHS3 and REACH requirements. The S-8250BAP-I6T1U, designated as Not For New Designs, should be replaced with any of the Active equivalents for new design implementations.

For production continuity, S-8240AAB-I6T1U and S-8240AAC-I6T1U offer the highest inventory levels (1229 and 1137 units respectively), ensuring supply availability. The S-8230 series variants (S-8230AAD-I6T1U through S-8230BAF-I6T1U) provide additional options with comparable stock levels.

All substitutes maintain identical electrical and mechanical specifications, including the SNT-6A package footprint, surface mount configuration, and -40°C to 85°C operating temperature range. Selection among equivalents may be based on inventory availability and internal design documentation requirements.

Frequently Asked Questions (FAQ)

Q: Can S-8250BAP-I6T1U be directly replaced with any of the listed substitutes?

A: Yes. All listed parts share identical battery chemistry (Lithium Ion/Polymer), cell count (1), fault protection type (Over Current), package configuration (6-SMD, Flat Leads, SNT-6A), operating temperature range (-40°C to 85°C), and compliance certifications (ROHS3, REACH Unaffected). Direct substitution is electrically and mechanically compatible.

Q: Why is S-8250BAP-I6T1U marked as Not For New Designs?

A: This designation indicates the part is in end-of-life status. ABLIC Inc. recommends using Active alternatives for new design implementations. All listed substitutes are Active products suitable for both new designs and ongoing production.

Q: Are there any package or footprint differences among the substitutes?

A: No. All substitute parts use the identical 6-SMD, Flat Leads package with SNT-6A supplier device package designation. PCB footprints and assembly processes remain unchanged.

Q: Which substitute offers the best inventory availability?

A: S-8240AAB-I6T1U provides the highest inventory at 1229 units, followed by S-8240AAC-I6T1U at 1137 units. Both are suitable for immediate procurement.

Q: Do all substitutes maintain the same operating temperature specifications?

A: Yes. All substitute parts operate across the identical -40°C to 85°C temperature range, ensuring compatibility in thermal environments matching the original S-8250BAP-I6T1U specifications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message