S-80955CLNB-G7RT2G Equivalent & Substitute Parts

Part Overview

The S-80955CLNB-G7RT2G is a single-channel voltage supervisor IC manufactured by ABLIC Inc., designed for power management applications. This device monitors a 5.5V threshold and provides push-pull, totem pole output with active-low reset functionality. The part is classified as Not For New Designs, indicating it has reached end-of-life status. For ongoing production requirements or new system implementations, equivalent substitute parts with active product status are available.

Substiute Parts

S-80955CLNB-G7RT2G

ABLIC Inc.In Stock: 796S-80955CLNB-G7RT2G Datasheet

Current PartRFQ

S-80955CLNB-G7RT2U

ABLIC Inc.In Stock: 809S-80955CLNB-G7RT2U Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the S-80955CLNB-G7RT2G is determined by strict equivalence across the following critical parameters:

• Voltage threshold: 5.5V
• Output type: Push-Pull, Totem Pole
• Reset logic: Active Low
• Reset timeout: 18ms Minimum
• Package: SC-82A, SOT-343 (surface mount)
• Operating temperature range: -40°C ~ 85°C
• Number of monitored channels: 1
• Compliance certifications: ROHS3, REACH Unaffected

The substitute part S-80955CLNB-G7RT2U meets all these electrical and mechanical parameters identically. The primary distinction is product status: the main part is Not For New Designs, while the substitute maintains Active status.

Parameter Comparison

Engineering Selection Recommendations

The S-80955CLNB-G7RT2U is the direct parametric equivalent for the S-80955CLNB-G7RT2G. Both parts are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements. The substitute part carries Active product status, making it suitable for new designs and ongoing production. Selection between these parts should be based on design phase requirements: the main part may be used for legacy system maintenance where existing inventory is available, while the substitute is appropriate for new implementations and future production runs.

Frequently Asked Questions (FAQ)

Q: Can S-80955CLNB-G7RT2U be used as a direct replacement for S-80955CLNB-G7RT2G?

A: Yes. Both parts are electrically and mechanically identical across all specified parameters, including voltage threshold, output configuration, reset characteristics, package type, and operating temperature range. No circuit modifications are required.

Q: Are there any differences in compliance or certifications between these parts?

A: No. Both parts maintain identical ROHS3 compliance, REACH unaffected status, and moisture sensitivity ratings. Regulatory requirements are equivalent.

Q: What is the significance of the product status difference?

A: The main part (Not For New Designs) indicates end-of-life status and is intended for legacy system support only. The substitute (Active) is recommended for new designs and ongoing production to ensure long-term availability and manufacturer support.

Q: Are the packages physically identical?

A: Yes. Both parts use the SC-82A package in SOT-343 form factor for surface mount applications. PCB footprints and assembly processes are identical.

Q: Can these parts be used interchangeably in existing designs?

A: Yes. The electrical specifications, pin configuration, and functional behavior are identical, allowing direct substitution without design changes.